Microwave-assisted synthesis of biologically relevant steroidal 17-exo-pyrazol-5'-ones from a norpregnene precursor by a side-chain elongation/heterocyclization sequence

• Gergő Mótyán,
• László Mérai,
• Márton Attila Kiss,
• Zsuzsanna Schelz,
• Izabella Sinka,
• István Zupkó and
• Éva Frank

Beilstein J. Org. Chem. 2018, 14, 2589–2596, doi:10.3762/bjoc.14.236

• 10.3762/bjoc.14.236 Abstract Multistep syntheses of novel 17β-pyrazol-5'-ones in the Δ5-androstane series were efficiently carried out from pregnenolone acetate. A steroidal 17-carboxylic acid was first synthesized as a norpregnene precursor by the bromoform reaction and subsequent acetylation. Its CDI

• multistep sequence (Scheme 1). First compound 1 was converted to the 17β-carboxylic acid 2b by the bromoform reaction and subsequent acetylation according to well-known literature procedures [21][22][23]. After the activation of 2b with 1,1′-carbonyldiimidazole (CDI) as coupling reagent in THF, the

• . This indicates that the pyrazolone heterocyclic ring at the 17β position is a promising scaffold for the design of anticancer agents of the Δ5 androstene series. 1H NMR spectra of compound 7f in CDCl3 (top; # solvent signal) and in DMSO-d6 (bottom; # solvent signal). Multistep synthesis of steroidal β

Cobalt bis(acetylacetonate)–tert-butyl hydroperoxide–triethylsilane: a general reagent combination for the Markovnikov-selective hydrofunctionalization of alkenes by hydrogen atom transfer

• Xiaoshen Ma and
• Seth B. Herzon

Beilstein J. Org. Chem. 2018, 14, 2259–2265, doi:10.3762/bjoc.14.201

• ligand architectures [21], and often need to be prepared by multistep sequences. Here we report a uniform set of reaction conditions to achieve a broad range of HAT hydrofunctionalization reactions using the simple reagents cobalt acetoacetonate [Co(acac)2], tert-butyl hydroperoxide (TBHP), and

A general and atom-efficient continuous-flow approach to prepare amines, amides and imines via reactive N-chloramines

• Katherine E. Jolley,
• Michael R. Chapman and
• A. John Blacker

Beilstein J. Org. Chem. 2018, 14, 2220–2228, doi:10.3762/bjoc.14.196

• therefore longer tres for slow reactions [7][8]. The use of CSTRs to carry out sequential or multistep reactions has been exploited by Ley and others [9][10][11]. The strategy is useful, since it has the potential to eliminate time-consuming and costly product isolations. In these systems, the reactants and

Artificial bioconjugates with naturally occurring linkages: the use of phosphodiester

• Takao Shoji,
• Hiroki Fukutomi,
• Yohei Okada and
• Kazuhiro Chiba

Beilstein J. Org. Chem. 2018, 14, 1946–1955, doi:10.3762/bjoc.14.169

• solvents, and washing the precipitates with polar solvents simultaneously rinses away excess amino acids or nucleosides and coupling reagents. We have demonstrated multistep syntheses of up to 28-mers for peptides and 21-mers for oligonucleotides without column purification. In all cases, the C-terminal

Assessing the possibilities of designing a unified multistep continuous flow synthesis platform

• Mrityunjay K. Sharma,
• Roopashri B. Acharya,
• Chinmay A. Shukla and
• Amol A. Kulkarni

Beilstein J. Org. Chem. 2018, 14, 1917–1936, doi:10.3762/bjoc.14.166

• 411008, India 10.3762/bjoc.14.166 Abstract The multistep flow synthesis of complex molecules has gained momentum over the last few years. A wide range of reaction types and conditions have been integrated seamlessly on a single platform including in-line separation as well as monitoring. Beyond merely

• getting considered as ‘flow version’ of conventional ‘one-pot synthesis’, multistep flow synthesis has become the next generation tool for creating libraries of new molecules. Here we give a more ‘engineering’ look at the possibility of developing a ‘unified multistep flow synthesis platform’. A detailed

• ’, in reality, such an envisaged system would be much more complex than these examples. Keywords: automation; continuous flow synthesis; cybernetics; multistep flow synthesis; unified platforms; Review Introduction Flow chemistry is now seen as a reliable approach for the synthesis of simple organic

Graphitic carbon nitride prepared from urea as a photocatalyst for visible-light carbon dioxide reduction with the aid of a mononuclear ruthenium(II) complex

• Kazuhiko Maeda,
• Daehyeon An,
• Ryo Kuriki,
• Daling Lu and
• Osamu Ishitani

Beilstein J. Org. Chem. 2018, 14, 1806–1812, doi:10.3762/bjoc.14.153

• reactions [21][22]. Apart from mpg-C3N4 that is usually prepared by a hard-template method with multistep procedures [9][23], g-C3N4 having a relatively higher surface area can be readily prepared by heating urea, which is an inexpensive and readily available precursor, in air [14][24]. In fact, the urea

An amine protecting group deprotectable under nearly neutral oxidative conditions

• Shahien Shahsavari,
• Chase McNamara,
• Mark Sylvester,
• Emily Bromley,
• Savannah Joslin,
• Bao-Yuan Lu and
• Shiyue Fang

Beilstein J. Org. Chem. 2018, 14, 1750–1757, doi:10.3762/bjoc.14.149

• collection of transformations to be carried out on the protected substrates that are unattainable using any known protecting groups. Keywords: amine; carbamate; dM-Dmoc; oxidation; protecting group; Introduction In multistep organic synthesis, amino groups usually have to be protected [1]. Protecting

• basic and nucleophilic conditions. We expect that the new protecting group will find wide applications in multistep organic synthesis. Experimental General: All reactions were performed in oven-dried glassware under an argon atmosphere using standard Schlenk techniques. Reagents and solvents available

β-Hydroxy sulfides and their syntheses

• Mokgethwa B. Marakalala,
• Edwin M. Mmutlane and
• Henok H. Kinfe

Beilstein J. Org. Chem. 2018, 14, 1668–1692, doi:10.3762/bjoc.14.143

• good yields of products and remarkable regioselectivity in most cases are obtained. Devan et al. reported a one-pot, multistep tetrathiomolybdate-assisted epoxide ring opening with masked thiolates and selenoates [60]. Treatment of epoxides with in situ-generated disulfides in the presence of

Heterogeneous acidic catalysts for the tetrahydropyranylation of alcohols and phenols in green ethereal solvents

• Ugo Azzena,
• Massimo Carraro,
• Gloria Modugno,
• Luisa Pisano and
• Luigi Urtis

Beilstein J. Org. Chem. 2018, 14, 1655–1659, doi:10.3762/bjoc.14.141

• employed reactions is a challenge in contemporary organic chemistry. We applied such an approach to the synthesis and further conversion of tetrahydropyranyl ethers, an important class of compounds widely employed in multistep syntheses. Several alcohols and phenols were almost quantitatively converted

• one-pot reaction conditions. Keywords: green chemistry; green solvents; heterogeneous catalysts; multistep reactions; tetrahydropyranylation; Introduction Due to their general stability to a wide range of reagents and ease of removal, tetrahydropyranyl (THP) ethers are widely employed in multistep

Phosphoramidite building blocks with protected nitroxides for the synthesis of spin-labeled DNA and RNA

• Timo Weinrich,
• Eva A. Jaumann,
• Ute M. Scheffer,
• Thomas F. Prisner and
• Michael W. Göbel

Beilstein J. Org. Chem. 2018, 14, 1563–1569, doi:10.3762/bjoc.14.133

• obtained by phosphitylation in ample quantity (Scheme 2). Inosine derivatives protected with TOM in 2’-position are accessible but only by a multistep procedure [45]. We therefore decided to synthesize the corresponding 2’-O-TBS building block instead (Scheme 3). Starting compound 17 was prepared in a

One hundred years of benzotropone chemistry

• Arif Dastan,
• Haydar Kilic and
• Nurullah Saracoglu

Beilstein J. Org. Chem. 2018, 14, 1120–1180, doi:10.3762/bjoc.14.98

• the dibromides 24 and 25 are the result of the addition of HBr, which is formed under the reaction conditions. 2.1.2. Multistep synthesis of 4,5-benzotropone (11): The first multistep synthesis for 4,5-benzotropone (11) is the original procedure described by Thiele, Schneider, and Weitz, which

• rather than the 1,2-double bond to 1-methoxynaphthalene (310). The position of the halogen substituent in 311 and 312 was also determined by the cycloadducts 320 and 321 between 5-halo-2,3-benzotropones and maleic anhydride (Figure 14) [185][187]. 6.1.2. Multistep synthesis via dihalocarbene addition: As

• shown in Scheme 6, the synthesis of the bicyclic ring 33 from the dichlorocarbene adduct of oxobenzonorbornadiene 31 has also been reported by Ranken’s group in two steps [53]. Hydrolysis of 33 in water under acidic conditions led to 2-chlorobenzotropone 309 in 20% yield (Scheme 53) [53]. A multistep

Cross-coupling of dissimilar ketone enolates via enolonium species to afford non-symmetrical 1,4-diketones

• Keshaba N. Parida,
• Gulab K. Pathe,
• Shimon Maksymenko and
• Alex M. Szpilman

Beilstein J. Org. Chem. 2018, 14, 992–997, doi:10.3762/bjoc.14.84

• -membered heterocycles such as thiophenes, furans, and pyrroles. Consequently, numerous multistep approaches to unsymmetrical 1,4-dicarbonyl compounds involving, e.g., SN2-type displacements [1] or highly functionalized substrates such as β-ketoesters [2][3] or β-ketosulfones [4] have been developed

Nanoreactors for green catalysis

• M. Teresa De Martino,
• Loai K. E. A. Abdelmohsen,
• Floris P. J. T. Rutjes and
• Jan C. M. van Hest

Beilstein J. Org. Chem. 2018, 14, 716–733, doi:10.3762/bjoc.14.61

• sustainability and elegancy. Utilizing catalytic nanoreactors for greener reactions, for facilitating multistep synthetic pathways in one-pot procedures, is imperative with far-reaching implications in the field. This review is focused on the applications of some of the most used nanoreactors in catalysis

• membrane attracts hydrophobic substrates and brings them in proximity to the membrane-bound catalyst, leading to faster reaction rates. The presence of multicompartments in one system is interesting from a catalysis point of view as multistep cascades using incompatible catalysts can be achieved in one

• , the system was recycled for at least 9 times without any loss in enzymatic activity. Polymersomes have proven to be very useful for the performance of multistep catalytic conversions, in particular with enzymes [81]. Voit et al. studied the use of cross-linked pH sensitive polymersomes for the

Heterogeneous Pd catalysts as emulsifiers in Pickering emulsions for integrated multistep synthesis in flow chemistry

• Katharina Hiebler,
• Georg J. Lichtenegger,
• Manuel C. Maier,
• Eun Sung Park,
• Renie Gonzales-Groom,
• Bernard P. Binks and
• Heidrun Gruber-Woelfler

Beilstein J. Org. Chem. 2018, 14, 648–658, doi:10.3762/bjoc.14.52

• . Keywords: compartmentalisation; heterogeneous catalysis; multistep flow chemistry; palladium; Pickering emulsions; Introduction Palladium (Pd) catalysis has been established as a key component in the toolbox of organic chemists. Reactions that are catalysed by palladium benefit from the remarkable

• on the planned realisation of the integrated multistep continuous flow synthesis of valsartan and sacubitril within the frame of the ONE-FLOW project is given. The compounds are well known as APIs in a combination drug for the treatment of hypertension and chronic heart failure (Entresto®, Novartis

• is also suitable for the multistep synthesis of 1 and 2. Therefore, the so-called plug & play reactor, a versatile device featuring both exchangeable reaction segments and modules for heating/cooling and mixing [38], was employed to test the activity and stability of the catalysts in continuous flow

High-yielding continuous-flow synthesis of antimalarial drug hydroxychloroquine

• Eric Yu,
• Hari P. R. Mangunuru,
• Nakul S. Telang,
• Caleb J. Kong,
• Jenson Verghese,
• Stanley E. Gilliland III,
• Saeed Ahmad,
• Raymond N. Dominey and
• B. Frank Gupton

Beilstein J. Org. Chem. 2018, 14, 583–592, doi:10.3762/bjoc.14.45

• multistep preparations of highly-complex natural products and APIs [10][11][12][13][14][15][16][17][18][19]. Advantages include precise control of key reaction parameters such as heat and pressure, improved heat and mass transfer capabilities for better thermal control, enhanced selection of kinetically

Continuous multistep synthesis of 2-(azidomethyl)oxazoles

• Thaís A. Rossa,
• Nícolas S. Suveges,
• Marcus M. Sá,
• David Cantillo and
• C. Oliver Kappe

Beilstein J. Org. Chem. 2018, 14, 506–514, doi:10.3762/bjoc.14.36

• with unstable intermediates or reagents can be overcome with the use of continuous-flow chemistry. Continuous-flow processing has demonstrated to be an ideal tool for the development of uninterrupted multistep reactions [35][36][37]. The integration of several sequential steps can be readily achieved

Latest development in the synthesis of ursodeoxycholic acid (UDCA): a critical review

• Fabio Tonin and
• Isabel W. C. E. Arends

Beilstein J. Org. Chem. 2018, 14, 470–483, doi:10.3762/bjoc.14.33

• for this multistep synthesis will be discussed. Review Precursor availability Bile acids The most important active ingredients of bile are the bile acids. Together with their salts, they allow the emulsification of lipids, a fundamental step for their absorption and digestion. Bile acids are 24-carbon

• in this review. C12 Dehydroxylation Chemical dehydroxylation UDCA can be obtained by a multistep chemical synthesis starting from CA. Two main steps are involved: the dehydroxylation at C12 and the epimerization of the 7-OH group. In order to achieve chemical dehydroxylation, firstly CA has to be

One-pot sequential synthesis of tetrasubstituted thiophenes via sulfur ylide-like intermediates

• Jun Ki Kim,
• Hwan Jung Lim,
• Kyung Chae Jeong and
• Seong Jun Park

Beilstein J. Org. Chem. 2018, 14, 243–252, doi:10.3762/bjoc.14.16

• tetrasubstituted thiophenes via the intramolecular cyclization of S-alkylated heterocyclic–aryl dithioesters [56]. However, these approaches are limited by the multistep synthesis (Figure 2A) [54][55] and the complicated dithioester preparation (Figure 2B) [56]. In general, tetrasubstituted thiophenes have

Transition-metal-free [3 + 3] annulation of indol-2-ylmethyl carbanions to nitroarenes. A novel synthesis of indolo[3,2-b]quinolines (quindolines)

• Michał Nowacki and
• Krzysztof Wojciechowski

Beilstein J. Org. Chem. 2018, 14, 194–202, doi:10.3762/bjoc.14.14

• as anticancer agents [1][6][7] (Figure 1). Synthetic strategies towards indolo[3,2-b]quinolines have been reviewed [8]. These methodologies usually employ multistep procedures. Selected starting materials applicable to the synthesis of indolo[3,2-b]quinolines are presented in Scheme 1. Bis(2

• -nitrobenzyl)malonate upon treatment with sodium hydroxide undergoes a multistep transformation resulting in 11-hydroxyindolo[3,2-b]quinoline-5-N-oxide (a) [9]. This approach is based on the first synthesis of the indolo[3,2-b]quinoline framework by Fichter and Boehringer in 1906 [10]. Indoxyl [11] and N,O

• (e) [15] and palladium(II) acetate-mediated oxidative cyclization of 3-(phenylamino)quinoline (f) afford quindoline [16]. Some of these syntheses require harsh conditions and multistep procedures. Another drawback of some of the known methodologies is the use of transition metal catalysts for the

Gram-scale preparation of negative-type liquid crystals with a CF₂CF₂-carbocycle unit via an improved short-step synthetic protocol

• Tatsuya Kumon,
• Shohei Hashishita,
• Takumi Kida,
• Shigeyuki Yamada,
• Takashi Ishihara and
• Tsutomu Konno

Beilstein J. Org. Chem. 2018, 14, 148–154, doi:10.3762/bjoc.14.10

• (VA)-type display materials. In spite of their valuable utility, synthetic procedures for generating the aforementioned CF2CF2-containing LC molecules inevitably require a multistep protocol, viz. eight steps for 1 and nine steps for 2, which is a substantial drawback for the practical application of

Stereochemical outcomes of C–F activation reactions of benzyl fluoride

• Neil S. Keddie,
• Pier Alexandre Champagne,
• Justine Desroches,
• Jean-François Paquin and
• David O'Hagan

Beilstein J. Org. Chem. 2018, 14, 106–113, doi:10.3762/bjoc.14.6

• carbon–halogen bond known [1]. Its low reactivity, in comparison to other C–X bonds, means that it is inert to all but the most harsh reaction conditions, and fluorine can generally be carried through multistep syntheses without concern over side reactions (the exception being SNAr reactions). In recent

• years, there has been an increasing interest in C–F bond activation [2], with a view to using organic bound fluoride as a leaving group in substitution reactions that typically require more activated leaving groups. Such an approach could circumvent the requirement for protecting groups in multistep

Synthetic mRNA capping

• Fabian Muttach,
• Nils Muthmann and
• Andrea Rentmeister

Beilstein J. Org. Chem. 2017, 13, 2819–2832, doi:10.3762/bjoc.13.274

• multistep preparation of the triphosphate bridge, the Sekine group presented a synthetic route to RNA bearing a 5′-terminal TMG-capped pyrophosphate linkage on solid support. Since pyrophosphate formation is easier than triphosphate formation, this route resulted in higher coupling yields. Whether this RNA

CF₃SO₂X (X = Na, Cl) as reagents for trifluoromethylation, trifluoromethylsulfenyl-, -sulfinyl- and -sulfonylation. Part 1: Use of CF₃SO₂Na

• Hélène Guyon,
• Hélène Chachignon and
• Dominique Cahard

Beilstein J. Org. Chem. 2017, 13, 2764–2799, doi:10.3762/bjoc.13.272

• . For the iodination step, the authors proposed that the β-CF3 alkyl radical was intercepted by I2, which was formed by a multistep redox process from I2O5. In continuation of this work, the same research group described the bromotrifluoromethylation of alkenes under similar reaction conditions but

•  29b) [51]. A single-electron oxidative free-radical process was ascertained for the generation of CF3•. From enynes, the iodination step was realised by I2, which was formed by a multistep redox process from I2O5. The intramolecular carbotrifluoromethylations of alkenes from acrylamides and

Preparation and isolation of isobenzofuran

• Morten K. Peters and
• Rainer Herges

Beilstein J. Org. Chem. 2017, 13, 2659–2662, doi:10.3762/bjoc.13.263

• vacuum pyrolysis and multistep syntheses of the precursors. The alternative way to synthesize IBF (1) is 1,4-elimination of 1,3-dihydro-1-methoxyisobenzofuran (7, DMIBF), which provides access to IBF (1) at ambient temperature [18]. Three methods have been published to prepare 7 (DMIBF). Reduction of

A semisynthesis of 3'-O-ethyl-5,6-dihydrospinosyn J based on the spinosyn A aglycone

• Kai Zhang,
• Shenglan Liu,
• Anjun Liu,
• Hongxin Chai,
• Jiarong Li and
• Lamusi A

Beilstein J. Org. Chem. 2017, 13, 2603–2609, doi:10.3762/bjoc.13.257

• aglycone and D-forosamine are complicated. Therefore, the aglycone and D-forosamine are obtained through a two-step hydrolysis process in our work. Preparation of 3-O-ethyl-2,4-di-O-methylrhamnose 3-O-Ethyl-2,4-di-O-methylrhamnose was synthesized from commercial rhamnose via a multistep process (Scheme 4