Combined experimental and theoretical studies of regio- and stereoselectivity in reactions of β-isoxazolyl- and β-imidazolyl enamines with nitrile oxides

• Ilya V. Efimov,
• Marsel Z. Shafikov,
• Nikolai A. Beliaev,
• Natalia N. Volkova,
• Tetyana V. Beryozkina,
• Wim Dehaen,
• Zhijin Fan,
• Viktoria V. Grishko,
• Gert Lubec,
• Pavel A. Slepukhin and
• Vasiliy A. Bakulev

Beilstein J. Org. Chem. 2016, 12, 2390–2401, doi:10.3762/bjoc.12.233

• 4i), respectively. The regio- and stereospecificity and the apparent reaction rate increase by the introduction of electron-withdrawing substituents into the benzonitrile oxide structure, allow to presume that the reaction of enamines with nitrile oxides can be described as 1,3-dipolar cycloadditions

Diradical reaction mechanisms in [3 + 2]-cycloadditions of hetaryl thioketones with alkyl- or trimethylsilyl-substituted diazomethanes

• Grzegorz Mlostoń,
• Paulina Pipiak and
• Heinz Heimgartner

Beilstein J. Org. Chem. 2016, 12, 716–724, doi:10.3762/bjoc.12.71

• important classes of organic reactions, and [3 + 2]- cycloadditions, also known as 1,3-dipolar cycloadditions or Huisgen reactions, offer a universal tool for the preparation of five-membered heterocycles with a variable number of heteroatoms in the ring [1][2]. In addition to their practical importance

Multivalent polyglycerol supported imidazolidin-4-one organocatalysts for enantioselective Friedel–Crafts alkylations

• Tommaso Pecchioli,
• Manoj Kumar Muthyala,
• Rainer Haag and
• Mathias Christmann

Beilstein J. Org. Chem. 2015, 11, 730–738, doi:10.3762/bjoc.11.83

• support in asymmetric organocatalysis. The use of chiral imidazolidinones in organocatalysis has been extensively reported for a wide range of enantioselective reactions involving α,β-unsaturated aldehydes, such as the Diels–Alder reactions [50], 1,3-dipolar cycloadditions [51] and Friedel–Crafts

On the strong difference in reactivity of acyclic and cyclic diazodiketones with thioketones: experimental results and quantum-chemical interpretation

• Andrey S. Mereshchenko,
• Alexey V. Ivanov,
• Viktor I. Baranovskii,
• Grzegorz Mloston,
• Ludmila L. Rodina and
• Valerij A. Nikolaev

Beilstein J. Org. Chem. 2015, 11, 504–513, doi:10.3762/bjoc.11.57

• compounds 1a–g with thiobenzophenone 2a using the PBE1PBE/6-31G*//PCM (benzene) method. The energies calculated via B3LYP/6-31G*//PCM (benzene) are given in parenthesis. Calculated relative energies for the 1,3-dipolar cycloadditions of diazodicarbonyl compounds 1a–f with thioketone 2b on the potential

New highlights of the syntheses of pyrrolo[1,2-a]quinoxalin-4-ones

• Emilian Georgescu,
• Alina Nicolescu,
• Florentina Georgescu,
• Florina Teodorescu,
• Daniela Marinescu,
• Ana-Maria Macsim and
• Calin Deleanu

Beilstein J. Org. Chem. 2014, 10, 2377–2387, doi:10.3762/bjoc.10.248

• . Keywords: 1,3-dipolar cycloadditions; multicomponent; one-pot three-component reactions; pyrrolo[1,2-a]benzimidazole; pyrrolo[1,2-a]quinoxalin-4-one; Introduction The pyrrolo[1,2-a]quinoxaline system has significant biological activities and is a subject fo constant interest. This skeleton is a

Triazol-substituted titanocenes by strain-driven 1,3-dipolar cycloadditions

• Andreas Gansäuer,
• Andreas Okkel,
• Lukas Schwach,
• Laura Wagner,
• Anja Selig and
• Aram Prokop

Beilstein J. Org. Chem. 2014, 10, 1630–1637, doi:10.3762/bjoc.10.169

• the synthesis of triazole-substituted titanocenes via strain-driven 1,3-dipolar cycloadditions between azide-functionalized titanocenes and cyclooctyne has been developed. It features the first synthesis of titanocenes containing azide groups. These compounds constitute ‘second-generation

• nucleophiles. We decided to address these issues by employing cationic amide-substituted titanocenes as building blocks and strain-driven 1,3-dipolar cycloadditions [34][35][36][37][38][39][40] as synthetic methodology for the preparation of such ‘second-generation’ functional titanocenes. This line of action

• seemed especially appealing for two reasons. First, the cationic amide titanocenes have already displayed interesting activity and therefore serve as our lead structures. Second, the strain-driven 1,3-dipolar cycloadditions have evolved as extremely mild reactions for the functionalization of complex

N-Alkylated dinitrones from isosorbide as cross-linkers for unsaturated bio-based polyesters

• Oliver Goerz and
• Helmut Ritter

Beilstein J. Org. Chem. 2014, 10, 902–909, doi:10.3762/bjoc.10.88

• electron spin traps [1] and in cycloaddition reactions [2]. As nitrones undergo 1,3-dipolar cycloadditions under mild conditions with a variety of unsaturated substances with a catalyst [3][4] or without a catalyst [5] they are important for the synthetic accessibility of five-membered heterocycles

• isoxazolidines 5a/b (Scheme 3). From the NMR spectra it could be determined that only the 5-substituted isoxazolidine was formed with a ratio of 60/40 of Z/E. Although 1,3-dipolar cycloadditions of nitrones with alkenes are controlled by molecular orbital interactions, the steric character of the molecular

• . 1,3-dipolar cycloadditions of model nitrones with dimethyl itaconate confirmed the proposed mechanism of cross-linking. Experimental Materials Acryloyl chloride (97%), crotonic acid (98%), itaconic acid (IA, 97%), methyl acrylate (99%), methyl crotonate (98%), succinic acid (SA, 99%), p

Isocyanide-based multicomponent reactions towards cyclic constrained peptidomimetics

• Gijs Koopmanschap,
• Eelco Ruijter and
• Romano V.A. Orru

Beilstein J. Org. Chem. 2014, 10, 544–598, doi:10.3762/bjoc.10.50

• subsequent transformations [19][22][26]. Examples of IMCR orthogonal species or functionalities are alkenes, alkynes and azides which may give the cyclic analogues via subsequent ring closing metathesis (RCM) or 1,3-dipolar cycloadditions. In contrast, protected functional groups first require a deprotection

Silver and gold-catalyzed multicomponent reactions

• Giorgio Abbiati and
• Elisabetta Rossi

Beilstein J. Org. Chem. 2014, 10, 481–513, doi:10.3762/bjoc.10.46

• -type reactions, hetero Diels–Alder reactions, 1,3-dipolar cycloadditions and nitroso aldol reactions [93]. The process was firstly accomplished with preformed aryl-substituted aldimines [94] and then developed as a MCR for less stable alkyl-substituted aldimines, which were prepared in situ from

Additive-assisted regioselective 1,3-dipolar cycloaddition of azomethine ylides with benzylideneacetone

• Chuqin Peng,
• Jiwei Ren,
• Jun-An Xiao,
• Honggang Zhang,
• Hua Yang and
• Yiming Luo

Beilstein J. Org. Chem. 2014, 10, 352–360, doi:10.3762/bjoc.10.33

• Chuqin Peng Jiwei Ren Jun-An Xiao Honggang Zhang Hua Yang Yiming Luo School of Chemistry and Chemical Engineering, Central South University,Changsha, Hunan 410083, P. R. China 10.3762/bjoc.10.33 Abstract 1,3-Dipolar cycloadditions of isatins, benzylamine and benzylideneacetones were studied to

• employed as starting materials to conduct 1,3-dipolar cycloadditions to yield spirooxindole core structures [16][17][18][19][20]. Owing to the ease of preparation, the azomethine ylides generated from isatin with α-amino acids or amines were frequently chosen as important 1,3-dipolar intermediates to react

• -constructed pyrrolidine. However, unsaturated ketones with α-hydrogens such as benzylideneacetone, which have attracted great interest due to their synthetic potential [40][41][42], have not been exhaustively studied as suitable dipolarophiles for 1,3-dipolar cycloadditions of azomethine ylides to prepare

Synthesis of new enantiopure poly(hydroxy)aminooxepanes as building blocks for multivalent carbohydrate mimetics

• Léa Bouché,
• Maja Kandziora and
• Hans-Ulrich Reissig

Beilstein J. Org. Chem. 2014, 10, 213–223, doi:10.3762/bjoc.10.17

• reduction of the carbonyl group [43] and TBS cleavage, propargylic ether 18 was obtained (88% yield over two steps) [44]. The alkyne moiety provides options for further transformations, e.g. Sonogashira reactions, Glaser couplings or 1,3-dipolar cycloadditions (click reactions) [45]. We were also interested

Gold(I)-catalyzed enantioselective cycloaddition reactions

• Fernando López and
• José L. Mascareñas

Beilstein J. Org. Chem. 2013, 9, 2250–2264, doi:10.3762/bjoc.9.264

• , aldol reactions, 1,3-dipolar cycloadditions, and cyclizations [13][14][15]. Other gold-promoted asymmetric induction strategies rely on the use of chiral counterions. Indeed, it has been shown that a tight chiral ion pair with the gold cation is able to induce excellent levels of asymmetry in certain

Dipolar addition to cyclic vinyl sulfones leading to dual conformation tricycles

• Steven S. Y. Wong,
• Michael G. Brant,
• Christopher Barr,
• Allen G. Oliver and
• Jeremy E. Wulff

Beilstein J. Org. Chem. 2013, 9, 1419–1425, doi:10.3762/bjoc.9.159

• species [13][14][15][16][17][18][19][20][21]) have been less-frequently employed as acceptors in 1,3-dipolar cycloadditions [22][23][24][25]. Indeed, we are only aware of a single prior example of a cyclic alkyl vinyl sulfone participating in a dipolar addition with an azomethine ylide [26]. In part, this

• pathways are open to the reactants. The additional aromatic substituent in 7 (relative to 4) once again contributed to significant broadening in both the 1H and 13C NMR spectra. Conclusion Our results comprise the first syntheses of tricyclic sulfones by 1,3-dipolar cycloadditions of azomethine imines with

Towards a biocompatible artificial lung: Covalent functionalization of poly(4-methylpent-1-ene) (TPX) with cRGD pentapeptide

• Lena Möller,
• Christian Hess,
• Jiří Paleček,
• Yi Su,
• Axel Haverich,
• Andreas Kirschning and
• Gerald Dräger

Beilstein J. Org. Chem. 2013, 9, 270–277, doi:10.3762/bjoc.9.33

• required for these kinds of 1,3-dipolar cycloadditions, but their potential cytotoxic properties limit the usability in biomedical applications [16][17]. For overcoming this problem, several copper-free ligation methods were developed. In this work we pursue both options, i.e., the copper-mediated as well

• pentapeptide 1b the cycloaddition product 8a was formed in the absence of any additives (Scheme 2). Prior to chemical reactions carried out with modified TPX materials, all reactions were first probed in solution (see Supporting Information File 1, section 2D). In order to analyze the outcome of 1,3-dipolar

• cycloadditions, the model compound fluoresceinyl azide 9[29][30] was first coupled to TPX derivatives 7a or 7b, under identical conditions as described for cRGD peptide 1b. The resulting polymers 8c and 8d were studied by determining the UV absorption peaks of fluorescein between 400 and 600 nm (Figure 4

Carbohydrate-auxiliary assisted preparation of enantiopure 1,2-oxazine derivatives and aminopolyols

• Marcin Jasiński,
• Dieter Lentz and
• Hans-Ulrich Reissig

Beilstein J. Org. Chem. 2012, 8, 662–674, doi:10.3762/bjoc.8.74

• been introduced and broadly studied by Vasella and co-workers [14][15][16][17][18][19][20] and has also been used by other groups [21][22][23][24][25]. They observed moderate to high diastereoselectivities for 1,3-dipolar cycloadditions and for nucleophilic additions. Successful applications of these

Photochemical and thermal intramolecular 1,3-dipolar cycloaddition reactions of new o-stilbene-methylene-3-sydnones and their synthesis

• Kristina Butković,
• Željko Marinić,
• Krešimir Molčanov,
• Biserka Kojić-Prodić and
• Marija Šindler-Kulyk

Beilstein J. Org. Chem. 2011, 7, 1663–1670, doi:10.3762/bjoc.7.196

• azomethine imines. Intramolecular 1,3-dipolar cycloadditions of sydnone derivatives have not been as thoroughly investigated, and so far only a few examples are known [18][19][20]. Photochemically induced intramolecular 1,3-dipolar cycloadditions have been studied on 3,4-disubstituted sydnone derivatives [18

Unusual behavior in the reactivity of 5-substituted-1H-tetrazoles in a resistively heated microreactor

• Bernhard Gutmann,
• Toma N. Glasnov,
• Tahseen Razzaq,
• Walter Goessler,
• Dominique M. Roberge and
• C. Oliver Kappe

Beilstein J. Org. Chem. 2011, 7, 503–517, doi:10.3762/bjoc.7.59

• source and acetic acid (AcOH) as the reagent/catalyst in a NMP/H2O solvent mixture [25]. These 1,3-dipolar cycloadditions which involve in situ generated free hydrazoic acid (HN3) were performed on small scale (≈1 mL) at 220 °C in a microwave batch reactor with reaction times of 4–15 min, depending on

Rh-Catalyzed rearrangement of vinylcyclopropane to 1,3-diene units attached to N-heterocycles

• Franca M. Cordero,
• Carolina Vurchio,
• Stefano Cicchi,
• Armin de Meijere and
• Alberto Brandi

Beilstein J. Org. Chem. 2011, 7, 298–303, doi:10.3762/bjoc.7.39

• so that the various specific cyclopropane transformations can be used as a synthetic tool. In recent years we have shown that 1,3-dipolar cycloadditions of nitrones 1 to the highly strained alkene bicyclopropylidene (BCP, 2) [5][6][7] afford spirocyclopropanated isoxazolidines 3 [8][9] which, on

Synthesis of 2-substituted 9-oxa-guanines {5-aminooxazolo[5,4-d]pyrimidin- 7(6H)-ones} and 9-oxa-2-thio- xanthines {5-mercaptooxazolo[5,4-d]pyrimidin- 7(6H)-ones}

• Subrata Mandal,
• Wen Tai Li,
• Yan Bai,
• Jon D. Robertus and
• Sean M. Kerwin

Beilstein J. Org. Chem. 2008, 4, No. 26, doi:10.3762/bjoc.4.26

• preparation of a series of 2-substituted 5-aminooxazolo[5,4-d]pyrimidin-7(6H)-ones and related 5-thio-oxazolo[5,4-d]pyrimidines is described, including analogs suitable for further elaboration employing “click” chemistry utilizing copper-catalyzed Huisgen 1,3-dipolar cycloadditions. Two of the compounds

• preparation of analogs suitable for further elaboration, for example by “click” chemistry employing copper-catalyzed Huisgen 1,3-dipolar cycloadditions [18]. Results and Discussion Our previous route [5] to 8-methyl-9-oxa-guanine (2a) involved the thermal cyclodehydration of 5-(acetylamino)-2-amino-4,6