C3-Alkylation of furfural derivatives by continuous flow homogeneous catalysis

• Grédy Kiala Kinkutu,
• Catherine Louis,
• Myriam Roy,
• Juliette Blanchard and
• Julie Oble

Beilstein J. Org. Chem. 2023, 19, 582–592, doi:10.3762/bjoc.19.43

• furfural derivatives have been developed. In particular, their direct functionalization by transition-metal-catalyzed C–H activation processes [16][17][18] has become a major area of interest where only a few methods have been reported so far. Most examples concern functionalization at C5, which is the

• synthesis has increased dramatically and has rapidly become a routine tool for classical synthesis [26][27][28][29]. In particular, many efforts have been devoted to the development of flow alternatives for transition-metal-catalyzed cross-couplings [30] and for some C–H functionalizations [31

Access to cyclopropanes with geminal trifluoromethyl and difluoromethylphosphonate groups

• Ita Hajdin,
• Romana Pajkert,
• Mira Keßler,
• Jianlin Han,
• Haibo Mei and
• Gerd-Volker Röschenthaler

Beilstein J. Org. Chem. 2023, 19, 541–549, doi:10.3762/bjoc.19.39

• ]. Therefore, as relevant building blocks, tremendous efforts have been made to develop reliable methods for their synthesis. Transition-metal-catalyzed cyclopropanation of alkenes with trifluoromethyldiazoalkanes is a commonly used synthetic strategy for the construction of trifluoromethylcyclopropanes

Transition-metal-catalyzed domino reactions of strained bicyclic alkenes

• Austin Pounder,
• Eric Neufeld,
• Peter Myler and
• William Tam

Beilstein J. Org. Chem. 2023, 19, 487–540, doi:10.3762/bjoc.19.38

• shed light on future directions for further development in this field. Keywords: bicyclic alkenes; cascade; catalysis; domino; transition-metal-catalyzed; Introduction A well-orchestrated sequence of events – cascade, also known as domino, tandem, and sequential reactions, constitutes a fascinating

• Austin Pounder Eric Neufeld Peter Myler William Tam Guelph-Waterloo Centre for Graduate Work in Chemistry and Biochemistry, Department of Chemistry, University of Guelph, Guelph, Ontario, N1G 2W1, Canada 10.3762/bjoc.19.38 Abstract This review presents a comprehensive overview of transition-metal

• -catalyzed domino reactions of strained bicyclic alkenes, including both homo- and heterobicyclic alkenes. These compounds are important synthons in organic synthesis, providing an important platform for the construction of biologically/medicinally significant compounds which bear multiple stereocenters. The

Transition-metal-catalyzed C–H bond activation as a sustainable strategy for the synthesis of fluorinated molecules: an overview

• Louis Monsigny,
• Floriane Doche and
• Tatiana Besset

Beilstein J. Org. Chem. 2023, 19, 448–473, doi:10.3762/bjoc.19.35

• approaches, the transition-metal-catalyzed functionalization of various scaffolds with a panel of fluorinated groups (XRF, X = S, Se, O) offered straightforward access to high value-added compounds. This review will highlight the main advances made in the field with the transition-metal-catalyzed

• retrosynthetic disconnections. In this context, a strong interest from the scientific community was shown towards the challenging synthesis of fluorinated molecules by transition-metal-catalyzed C–H bond activation [44][45][46][47][48][49][50], allowing the functionalization of complex molecules and even for

• (e.g., SCF3, SeCF3, SCF2CO2Et, OCH2CF3) by transition-metal-catalyzed C–H bond activation (Scheme 1). The review will be organized in two main parts, dedicated to the construction of a C–SCF2R/SeCF3 and C–OCH2CF3 bond. This review does not aim to be exhaustive and key examples were carefully chosen to

Total synthesis of insect sex pheromones: recent improvements based on iron-mediated cross-coupling chemistry

• Eric Gayon,
• Guillaume Lefèvre,
• Olivier Guerret,
• Adrien Tintar and
• Pablo Chourreu

Beilstein J. Org. Chem. 2023, 19, 158–166, doi:10.3762/bjoc.19.15

• to overall processes with a low atom economy, generating a significant amount of chemical waste, and which can be expensive when noble metals such as palladium salts are required (Scheme 1). The high efficiency of transition-metal-catalyzed cross-coupling methods in C–C bond formation processes

1,4-Dithianes: attractive C2-building blocks for the synthesis of complex molecular architectures

• Bram Ryckaert,
• Ellen Demeyere,
• Frederick Degroote,
• Hilde Janssens and
• Johan M. Winne

Beilstein J. Org. Chem. 2023, 19, 115–132, doi:10.3762/bjoc.19.12

• untapped potential in this area of research, and expect the utility of these building blocks to grow in the coming years. In particular, the recently established options to elaborate and functionalize 1,4-dithianes using mild transition-metal-catalyzed couplings, and their use in cycloaddition reactions

Practical synthesis of isocoumarins via Rh(III)-catalyzed C–H activation/annulation cascade

• Qian-Ci Gao,
• Yi-Fei Li,
• Jun Xuan and
• Xiao-Qiang Hu

Beilstein J. Org. Chem. 2023, 19, 100–106, doi:10.3762/bjoc.19.10

• of 1,2-difunctionalized arenes with alkynes or carbon monoxide (Scheme 1b, III) [13][14][15][16], have been widely applied for the assembly of isocoumarins over the past decades. Recently, the transition-metal-catalyzed ortho C–H activation/annulation of benzoic acids has emerged as an attractive

• , delivering a variety of structurally diverse isocoumarins in an efficient manner (3aa–qa, 43–82%). It is worth mentioning that the tolerance of halogen substituents (Cl, Br and I) may open up a new opportunity for further transition-metal-catalyzed cross-coupling reactions. Sensitive groups, such as ester

• , the reaction of the isocoumarin 3ia with p-toluenesulfonyl hydrazide proceeded smoothly to deliver hydrazone 5 in 66% yield (Scheme 4b, right). Of note, oxime and hydrazone compounds are versatile synthetic building blocks, which have been widely applied in transition-metal-catalyzed cross-coupling

An alternative C–P cross-coupling route for the synthesis of novel V-shaped aryldiphosphonic acids

• Stephen J. I. Shearan,
• Enrico Andreoli and
• Marco Taddei

Beilstein J. Org. Chem. 2022, 18, 1518–1523, doi:10.3762/bjoc.18.160

• order of addition of reactants to perform the transition-metal-catalyzed C–P cross-coupling reaction, often referred to as the Tavs reaction, employing NiCl2 as a pre-catalyst in the phosphonylation of aryl bromide substrates using triisopropyl phosphite. This new method was employed in the synthesis of

• often either non-porous or have low porosity and have little to no long-range order. The idea here was that the V-shaped linkers, as well as different substituents attached to nitrogen, could potentially force a non-layered porous structure. Conventionally, the transition-metal-catalyzed C–P cross

Synthesis and electrochemical properties of 3,4,5-tris(chlorophenyl)-1,2-diphosphaferrocenes

• Almaz A. Zagidullin,
• Farida F. Akhmatkhanova,
• Mikhail N. Khrizanforov,
• Robert R. Fayzullin,
• Tatiana P. Gerasimova,
• Ilya A. Bezkishko and
• Vasili A. Miluykov

Beilstein J. Org. Chem. 2022, 18, 1338–1345, doi:10.3762/bjoc.18.139

• transition metal-catalyzed cross-coupling reactions broadly used for the preparation of different diarylacetylenes and, rarely, bis(chlorophenyl)acetylenes. Next, starting substituted benzaldehydes were treated with an excess of SOCl2 for 24 h at 25 °C. Corresponding substituted benzal chlorides 4 were

Synthesis of N-phenyl- and N-thiazolyl-1H-indazoles by copper-catalyzed intramolecular N-arylation of ortho-chlorinated arylhydrazones

• Yara Cristina Marchioro Barbosa,
• Guilherme Caneppele Paveglio,
• Claudio Martin Pereira de Pereira,
• Sidnei Moura,
• Cristiane Storck Schwalm,
• Gleison Antonio Casagrande and
• Lucas Pizzuti

Beilstein J. Org. Chem. 2022, 18, 1079–1087, doi:10.3762/bjoc.18.110

• reaction of hydrazones and p-benzoquinones [16], and Co3+/Cu2+-catalyzed C−N/N−N coupling of imidates with anthranils as both aminating reagents and organic oxidants [17]. Additional established routes to 1H-indazoles comprise transition metal‐catalyzed [18][19][20] and metal-free [21][22] intramolecular

Synthesis of novel alkynyl imidazopyridinyl selenides: copper-catalyzed tandem selenation of selenium with 2-arylimidazo[1,2-a]pyridines and terminal alkynes

• Mio Matsumura,
• Kaho Tsukada,
• Kiwa Sugimoto,
• Yuki Murata and
• Shuji Yasuike

Beilstein J. Org. Chem. 2022, 18, 863–871, doi:10.3762/bjoc.18.87

• attention [15][19][20][21][22][23][24][25][26]. This method involves a transition-metal-catalyzed one-pot, three-component reaction in which two functional groups are simultaneously introduced on the Se atom via double selenation. As examples, the following Cu-catalyzed one-pot reactions have been reported

Mechanochemical halogenation of unsymmetrically substituted azobenzenes

• Dajana Barišić,
• Mario Pajić,
• Ivan Halasz,
• Darko Babić and
• Manda Ćurić

Beilstein J. Org. Chem. 2022, 18, 680–687, doi:10.3762/bjoc.18.69

• ; N-halosuccinimide; palladium(II); Introduction Electrophilic aromatic substitution [1][2][3] and ligand-directed transition-metal-catalyzed reactions [4][5][6][7][8] are among the most widely used synthetic approaches for the preparation of halogenated arenes. They are important precursors in cross

Tosylhydrazine-promoted self-conjugate reduction–Michael/aldol reaction of 3-phenacylideneoxindoles towards dispirocyclopentanebisoxindole derivatives

• Sayan Pramanik and
• Chhanda Mukhopadhyay

Beilstein J. Org. Chem. 2022, 18, 469–478, doi:10.3762/bjoc.18.49

• , 3o, 3q, 3s, 3t and 3x) gave a good yield of the corresponding product, respectively. Here also, the halo-substituted aryl ring on 1 can be further used for transition-metal-catalyzed cross coupling reactions, thus providing a very good application. Then the effect of N-protecting groups on the

Iridium-catalyzed hydroacylation reactions of C1-substituted oxabenzonorbornadienes with salicylaldehyde: an experimental and computational study

• Angel Ho,
• Austin Pounder,
• Krish Valluru,
• Leanne D. Chen and
• William Tam

Beilstein J. Org. Chem. 2022, 18, 251–261, doi:10.3762/bjoc.18.30

• the art and science of selective molecular engineering [1]. To date, organic synthesis has largely been governed by the interconversion of pre-existing functional groups through the use of more traditional transition-metal-catalyzed cross-coupling reactions [2][3][4][5]. Although these reactions have

• attractive. Transition-metal-catalyzed reactions of strained bicyclic derivatives have been an intense area of research in the last 20 years (Scheme 1) [14][15][16][17]. Of particular interest is oxabenzonorbornadiene (OBD, 1), as it bears multiple points of reactivity that allow for diverse

Earth-abundant 3d transition metals on the rise in catalysis

• Nikolaos Kaplaneris and
• Lutz Ackermann

Beilstein J. Org. Chem. 2022, 18, 86–88, doi:10.3762/bjoc.18.8

• laboratories calls for a critical analysis of these methods to enable an efficient transition of these methods. Hence, manganese-catalyzed C–H functionalization for late-stage functionalizations of biomolecules and drug-like scaffolds are summarized [8]. Likewise, 3d transition metal-catalyzed C–H

Recent advances and perspectives in ruthenium-catalyzed cyanation reactions

• Thaipparambil Aneeja,
• Cheriya Mukkolakkal Abdulla Afsina,
• Padinjare Veetil Saranya and
• Gopinathan Anilkumar

Beilstein J. Org. Chem. 2022, 18, 37–52, doi:10.3762/bjoc.18.4

• demanded the need of an alternative method for the synthesis of nitriles. Nowadays transition-metal-catalyzed reactions have received tremendous interest. Various transition metals such as Fe [15], Co [16], Ni [17], Pd [18], Cu [19], Rh [20] etc. were well explored in cyanation owing to its cost-effective

• achieved significant progress in recent times. Transition-metal-catalyzed cyanation reactions have emerged as an alternative approach to conventional cyanation strategies. Nowadays ruthenium has gained much acceptance owing to its wide range of oxidation states and ability to form a large number of

Bifunctional thiourea-catalyzed asymmetric [3 + 2] annulation reactions of 2-isothiocyanato-1-indanones with barbiturate-based olefins

• Jiang-Song Zhai and
• Da-Ming Du

Beilstein J. Org. Chem. 2022, 18, 25–36, doi:10.3762/bjoc.18.3

• conveniently and comprehensively. However, as we know, the construction of these compounds is mostly carried out through transition-metal-catalyzed cyclization reactions [11][12][13][14], whereas strategies using bifunctional chiral thiourea catalysts are rarely reported. In 2018, Du's group reported a novel

Iron-catalyzed domino coupling reactions of π-systems

• Austin Pounder and
• William Tam

Beilstein J. Org. Chem. 2021, 17, 2848–2893, doi:10.3762/bjoc.17.196

• the design of novel domino reactions. Keywords: cascade; catalysis; coupling; earth-abundant; iron; Introduction Over the past couple decades, the use of transition-metal-catalyzed cross-coupling reactions have become a staple within the organic chemist’s arsenal of carbon–carbon and carbon

• . Iron-catalyzed cross dehydrogenative coupling Transition-metal-catalyzed carbon–carbon (C–C) or carbon–heteroatom (C–X) bond formation involving two different C–H bonds or one C–H and one X–H bond is formally known as cross dehydrogenative coupling (CDC) and is quite attractive to synthetic organic

Selective sulfonylation and isonitrilation of para-quinone methides employing TosMIC as a source of sulfonyl group or isonitrile group

• Chuanhua Qu,
• Run Huang,
• Yong Li,
• Tong Liu,
• Yuan Chen and
• Guiting Song

Beilstein J. Org. Chem. 2021, 17, 2822–2831, doi:10.3762/bjoc.17.193

• sulfones is a valuable and appealing task in synthetic chemistry. Traditionally, diarylmethyl sulfones are synthesized by transition-metal-catalyzed deoxy C–S bond-coupling reaction of sodium arylsulfinates with diarylmethanols [11], C–H functionalization of alkyl sulfones with aryl halides [12], and via a

Recent advances in the asymmetric phosphoric acid-catalyzed synthesis of axially chiral compounds

• Alemayehu Gashaw Woldegiorgis and
• Xufeng Lin

Beilstein J. Org. Chem. 2021, 17, 2729–2764, doi:10.3762/bjoc.17.185

• ]. Organocatalytic aryl C–H activation via a nonradical process represents an enormous challenge in organic synthesis, although the nucleophilic aromatic substitution with cleavage of the electrophilic aryl C–H bond has only recently been developed by transition-metal-catalyzed aryl C–H activation [57]. In the

• ][21] (Figure 2), and chiral building blocks in modern organic synthesis [5]. During the past decades, both C2 and non-C2 symmetric axially chiral biaryl compounds such as BINAP, BINAM, NOBIN and their derivatives BINOL have played a crucial role as ligands in the development of transition-metal

• -catalyzed enantioselective transformations [9][14][22][23]. Axial chirality is also found in chiral stationary phases for enantioselective separation, dopants in liquid-crystalline materials, chiroptical molecular switches, microporous soluble polymers, and interlocked nanotubes (Figure 3) [24]. In addition

Synthetic strategies toward 1,3-oxathiolane nucleoside analogues

• Umesh P. Aher,
• Dhananjai Srivastava,
• Girij P. Singh and
• Jayashree B. S

Beilstein J. Org. Chem. 2021, 17, 2680–2715, doi:10.3762/bjoc.17.182

• introduction on important classical approaches and older yet creative methods to provide the reader with a historical context. For comparison, this will be followed by a discussion of more modern techniques, including chiral auxiliaries for neighboring group participation and transition metal-catalyzed

Synthesis of highly substituted fluorenones via metal-free TBHP-promoted oxidative cyclization of 2-(aminomethyl)biphenyls. Application to the total synthesis of nobilone

• Ilya A. P. Jourjine,
• Lukas Zeisel,
• Jürgen Krauß and
• Franz Bracher

Beilstein J. Org. Chem. 2021, 17, 2668–2679, doi:10.3762/bjoc.17.181

• radical cyclizations [22], Pschorr reactions [23], and diverse cycloaddition protocols [24][25]. Especially transition-metal-catalyzed cross-coupling reactions starting from benzophenones, benzoic acids, dihalogenated benzene building blocks and others have emerged as new approaches in recent years [26

• ][27][28]. Various approaches starting from functionalized biaryls have hereby attracted considerable interest, since the precursors are readily available by established cross-coupling reactions. Beyond transition-metal-catalyzed reactions, acid-mediated cyclizations of biphenylcarboxylic acids and

Direct C(sp³)–H allylation of 2-alkylpyridines with Morita–Baylis–Hillman carbonates via a tandem nucleophilic substitution/aza-Cope rearrangement

• Siyu Wang,
• Lianyou Zheng,
• Shutao Wang,
• Shulin Ning,
• Zhuoqi Zhang and
• Jinbao Xiang

Beilstein J. Org. Chem. 2021, 17, 2505–2510, doi:10.3762/bjoc.17.167

• acetamides and acetates catalyzed synergistically by a metal acyclic iridium complex and a chiral Cu(I) complex [19]. Besides transition-metal-catalyzed allylic substitution reactions, Lewis-base-catalyzed allylic functionalizations using Morita−Baylis−Hillman (MBH) adducts as electrophilic allylic

Copper-catalyzed monoselective C–H amination of ferrocenes with alkylamines

• Zhen-Sheng Jia,
• Qiang Yue,
• Ya Li,
• Xue-Tao Xu,
• Kun Zhang and
• Bing-Feng Shi

Beilstein J. Org. Chem. 2021, 17, 2488–2495, doi:10.3762/bjoc.17.165

• ][10][11][12]. However, the above protocols generally proceeded under harsh conditions that led to poor functional group tolerance and generated stoichiometric amounts of waste. Thus far, the transition-metal-catalyzed C–H functionalization strategy has innovated the way to producing ferrocene

• preparation of ferrocene–drug conjugates effectively. Mechanistic studies indicated that the C–H activation step was the rate-determining step. 3d-Transition-metal-catalyzed C–H functionalization to access functionalized ferrocenes. Scope of ferrocenes with morpholine. Scope of various amines with 1a

Recent advances in the tandem annulation of 1,3-enynes to functionalized pyridine and pyrrole derivatives

• Yi Liu,
• Puying Luo,
• Yang Fu,
• Tianxin Hao,
• Xuan Liu,
• Qiuping Ding and
• Yiyuan Peng

Beilstein J. Org. Chem. 2021, 17, 2462–2476, doi:10.3762/bjoc.17.163

• condensation of α-halogenated carbonyl compounds, β-dicarbonyl compounds and amines; and iv) the latest developed multicomponent tandem reactions and transition metal-catalyzed coupling reactions [30][31][32][33][34][35][36][37][38][39]. Recently, substantial achievements have been made using azides as a

• synthesis [47]. Further, the Liu group reviewed the synthesis of allenes via transition metal-catalyzed 1,4-functionalizations of unactivated 1,3-enynes [48]. In this review, we will highlight the recent advances in the tandem annulation reactions of 1,3-enyne structural motifs for the construction of