Cytochrome P450 monooxygenase-mediated tailoring of triterpenoids and steroids in plants

• Karan Malhotra and
• Jakob Franke

Beilstein J. Org. Chem. 2022, 18, 1289–1310, doi:10.3762/bjoc.18.135

• (12) scaffold to 7β-hydroxythalianol, while CYP705A5 is a desaturase and introduces a double bond at C15 [41]. The related Arabidopsis CYP705A1 (also from clan 71) accepts a slightly different scaffold, arabidiol (11), triggering cleavage of the side chain at the same C15 instead of dehydrogenation

Modular synthesis of 2-furyl carbinols from 3-benzyldimethylsilylfurfural platforms relying on oxygen-assisted C–Si bond functionalization

• Sebastien Curpanen,
• Per Reichert,
• Gabriele Lupidi,
• Giovanni Poli,
• Julie Oble and
• Alejandro Perez-Luna

Beilstein J. Org. Chem. 2022, 18, 1256–1263, doi:10.3762/bjoc.18.131

• carbanion (by exocyclic cleavage) rather than a 3-furanyl anion (by endocyclic cleavage). As a consequence, the failure to promote C3–Si activation of intermediates E (SiR3 = SiEt3 or SiMe2t-Bu) according to our initially envisaged scenario depicted in Scheme 3, did not seem to be related to the difficulty

• -catalyzed arylation reactions (Scheme 7). Fluoride-promoted arylation reactions of benzyldimethyl(alkenyl)silanes have been reported, and it is established that they proceed through the cleavage of the benzyl moiety from the benzyldimethylsilyl groups, leading to either dimethylsilanols or cyclic siloxanes

Polymer and small molecule mechanochemistry: closer than ever

• José G. Hernández

Beilstein J. Org. Chem. 2022, 18, 1225–1235, doi:10.3762/bjoc.18.128

• to promote the thermodynamically disfavored SN2 cleavage of an individual protein disulfide bond by poorly nucleophilic organic thiols [21]. On the other hand, as for the connection or correlation between polymer and small molecule mechanochemistry, this Perspective article discusses recent studies

• cleavage of the polymer chains [23], a strategy that is still of relevance today [24][25] and also complements the recent application of ball milling for the synthesis of polymers [26]. As an example for the use of ball milling to activate mechanophores incorporated in polymers, Baytekin, Akkaya, and co

• -free ball milling has enabled to surpass the insolubility and recalcitrant reactivity of cellulose [36][37], chitin [38][39], and lignin (Figure 2) [40][41]. In addition to allowing solvent-free reactions, mechanical forces generated inside ball mills can depolymerize biomass through cleavage pathways

Reductive opening of a cyclopropane ring in the Ni(II) coordination environment: a route to functionalized dehydroalanine and cysteine derivatives

• Oleg A. Levitskiy,
• Olga I. Aglamazova,
• Yuri K. Grishin and
• Tatiana V. Magdesieva

Beilstein J. Org. Chem. 2022, 18, 1166–1176, doi:10.3762/bjoc.18.121

• ). Notably, insertion of the second COOR group in the starting cyclopropane complex 4 completely suppresses this reaction channel: intramolecular cyclization of the anions formed in the reductive cleavage of the three-membered ring was not observed. This may be attributed to the decreased nucleophilicity as

Synthesis of tryptophan-dehydrobutyrine diketopiperazine and biological activity of hangtaimycin and its co-metabolites

• Houchao Xu,
• Anne Wochele,
• Minghe Luo,
• Gregor Schnakenburg,
• Yuhui Sun,
• Heike Brötz-Oesterhelt and
• Jeroen S. Dickschat

Beilstein J. Org. Chem. 2022, 18, 1159–1165, doi:10.3762/bjoc.18.120

• -tryptophan (5) that was converted through a standard transformation into the methyl ester 6 and then through sequential reductive aminations with benzaldehyde and paraformaldehyde into 7 (Scheme 2) [13]. Cleavage of the benzyl group by catalytic hydrogenation afforded 8 that was coupled with tert

• -butyloxycarbonyl (Boc)-protected threonine using bis(2-oxo-3-oxazolidinyl)phosphinic chloride (BOP-Cl) [14][15] and Hünig’s base to give 9. Cleavage of the Boc group with 5% TFA followed by basic treatment resulted in the cyclisation to the dioxopiperazine 10. Acetylation and subsequent treatment with LiClO4 and

Electrochemical formal homocoupling of sec-alcohols

• Kosuke Yamamoto,
• Kazuhisa Arita,
• Masashi Shiota,
• Masami Kuriyama and
• Osamu Onomura

Beilstein J. Org. Chem. 2022, 18, 1062–1069, doi:10.3762/bjoc.18.108

• -2a was subjected to the present reaction conditions, oxidative C–C bond cleavage of dl-2a proceeded to give the corresponding ketone 3a (Scheme 5b) [48]. Recovered 2a was found to be a mixture of dl and meso isomers, indicating that homocoupling of in situ-generated ketone 3a occurred under the

First series of N-alkylamino peptoid homooligomers: solution phase synthesis and conformational investigation

• Maxime Pypec,
• Laurent Jouffret,
• Claude Taillefumier and
• Olivier Roy

Beilstein J. Org. Chem. 2022, 18, 845–854, doi:10.3762/bjoc.18.85

• ]. In this seminal publication, hydrazones were utilized as submonomers in the displacement step of resin-bound bromoacetylated peptoids and cleavage from the resin with TFA containing 5% of triethylsilane resulted in a concomitant reduction of the imine functions in N-alkylamino groups. In this work

Structural basis for endoperoxide-forming oxygenases

• Takahiro Mori and
• Ikuro Abe

Beilstein J. Org. Chem. 2022, 18, 707–721, doi:10.3762/bjoc.18.71

• , natural and (semi)synthetic endoperoxides with wide structural diversity show antimalarial activity against Plasmodium falciparum malaria. In this case, the reductive activation of the endoperoxide ring with the homolytic cleavage of the O–O bond leads to the generation of carbon-centered free radicals

• intermediate of fumitremorgin B, and is incorporated without cleavage of the O–O bond in the enzyme reaction catalyzed by FtmOx1. Biochemical and biophysical analyses of FtmOx1 have been reported by many different groups, and the structures of FtmOx1 wild type and variants have been solved in the apo and

Mechanochemical halogenation of unsymmetrically substituted azobenzenes

• Dajana Barišić,
• Mario Pajić,
• Ivan Halasz,
• Darko Babić and
• Manda Ćurić

Beilstein J. Org. Chem. 2022, 18, 680–687, doi:10.3762/bjoc.18.69

• proceeds by electrophilic cleavage with neutral NBS or the hydrogen bond complex NBS∙∙∙TsOH as a bromine source. Here we present the mechanochemical selective halogenation of unsymmetrically substituted azobenzenes by NXS (X = Cl, Br, or I). The liquid-assisted grinding of para-halogenated derivatives of

Direct C–H amination reactions of arenes with N-hydroxyphthalimides catalyzed by cuprous bromide

• Dongming Zhang,
• Bin Lv,
• Pan Gao,
• Xiaodong Jia and
• Yu Yuan

Beilstein J. Org. Chem. 2022, 18, 647–652, doi:10.3762/bjoc.18.65

• -electron transfer (SET) between CuBr and intermediate 5 forms intermediate 6, which initiates the N–O bond homolytic cleavage resulting in forming an N-centred phthalimidyl radical 7 (PhthN•) and anion 8. Meanwhile, Cu(I) is oxidized to Cu(II) in this step. Next, radical 7 attacks the benzene via radical

The asymmetric Henry reaction as synthetic tool for the preparation of the drugs linezolid and rivaroxaban

• Martin Vrbický,
• Karel Macek,
• Jaroslav Pochobradský,
• Jan Svoboda,
• Miloš Sedlák and
• Pavel Drabina

Beilstein J. Org. Chem. 2022, 18, 438–445, doi:10.3762/bjoc.18.46

• intermediate 11 was accompanied with simultaneous cleavage of the Boc group. However, attempts of achieving a selective deacetalation of 11 by the treatment with several reagents (e.g., I2/acetone [15], FeCl3·6H2O/acetaldehyde [16], Ce(OTf)3 [17]) were unsuccessful. Therefore, an alternative synthesis [18] was

Recent developments and trends in the iron- and cobalt-catalyzed Sonogashira reactions

• Surendran Amrutha,
• Sankaran Radhika and
• Gopinathan Anilkumar

Beilstein J. Org. Chem. 2022, 18, 262–285, doi:10.3762/bjoc.18.31

• with an electrophile results in the formation of a cobalt(III) intermediate. Subsequent homolytic cleavage and generation of cobalt(II) complex C and radical D the radical undergoes addition to phenylacetylene to provide cobalt(III) intermediate E. The targeted compound 1-methyl-4-(2-phenylethynyl

Organocatalytic asymmetric nitroso aldol reaction of α-substituted malonamates

• Ekta Gupta,
• Narendra Kumar Vaishanv,
• Sandeep Kumar,
• Raja Krishnan Purshottam,
• Ruchir Kant and
• Kishor Mohanan

Beilstein J. Org. Chem. 2022, 18, 217–224, doi:10.3762/bjoc.18.25

• ). Disappointingly, the reactions carried out by varying the α-substitution did not afford the desired product. In order to demonstrate the synthetic utility of the oxyaminated compounds, the reductive cleavage of the N–O bond was attempted under Zn/AcOH conditions. Pleasingly, the reaction afforded the aniline

Anomeric 1,2,3-triazole-linked sialic acid derivatives show selective inhibition towards a bacterial neuraminidase over a trypanosome trans-sialidase

• Peterson de Andrade,
• Sanaz Ahmadipour and
• Robert A. Field

Beilstein J. Org. Chem. 2022, 18, 208–216, doi:10.3762/bjoc.18.24

• both enzymes (Figure 3A) (and TcTS transferase activity in the presence of an acceptor substrate, such as lactose – Figure 3B) by releasing the fluorophore 4-methylumbelliferone (MU) for detection upon cleavage of the substrate 2'-(4-methylumbelliferyl) α-ᴅ-N-acetylneuraminic acid (MUNANA). Compounds

Synthesis and late stage modifications of Cyl derivatives

• Phil Servatius and
• Uli Kazmaier

Beilstein J. Org. Chem. 2022, 18, 174–181, doi:10.3762/bjoc.18.19

• +. Subsequent attack of water forms a tetrahedral intermediate which results in a cleavage of the acetylated lysine. Most HDAC inhibitors act as substrate mimics and contain a zinc-binding motif. They competitively interact with the HDACs to form stable intermediates and therewith block the active site. Many

Earth-abundant 3d transition metals on the rise in catalysis

• Nikolaos Kaplaneris and
• Lutz Ackermann

Beilstein J. Org. Chem. 2022, 18, 86–88, doi:10.3762/bjoc.18.8

• witnessed major momentum in metal-catalyzed C–H activation [4][5] as a more resource-economical strategy. This approach involves the efficient and selective cleavage of otherwise inert, yet omnipresent C–H bonds. This strategy avoids a variety of steps and reduces the amount of chemical waste. Very recently

Efficient and regioselective synthesis of dihydroxy-substituted 2-aminocyclooctane-1-carboxylic acid and its bicyclic derivatives

• İlknur Polat,
• Selçuk Eşsiz,
• Uğur Bozkaya and
• Emine Salamci

Beilstein J. Org. Chem. 2022, 18, 77–85, doi:10.3762/bjoc.18.7

• . Results and Discussion Initially, we focused on the synthesis of β-lactam 2, which was prepared by the cycloaddition of chlorosulfonyl isocyanate (CSI) to cis,cis-1,3-cyclooctadiene, as described in the literature [26]. β-Lactam 2 was transformed into cis-amino ester 3 by cleavage of the lactam ring with

The enzyme mechanism of patchoulol synthase

• Houchao Xu,
• Bernd Goldfuss,
• Gregor Schnakenburg and
• Jeroen S. Dickschat

Beilstein J. Org. Chem. 2022, 18, 13–24, doi:10.3762/bjoc.18.2

• proceeded with full retainment of the labelling in both cases (Scheme 1B). Subsequent chemical degradation through acid catalysed conversion into 5, oxidative cleavage to the diketone 13, BF3∙OEt2 mediated ring closure by aldol reaction and catalytic hydrogenation gave 14. For both experiments a full

Peptide stapling by late-stage Suzuki–Miyaura cross-coupling

• Hendrik Gruß,
• Rebecca C. Feiner,
• Ridhiwan Mseya,
• David C. Schröder,
• Michał Jewgiński,
• Kristian M. Müller,
• Rafał Latajka,
• Antoine Marion and
• Norbert Sewald

Beilstein J. Org. Chem. 2022, 18, 1–12, doi:10.3762/bjoc.18.1

• macrocyclisation product, which was confirmed by MALDI-ToF-MS of the crude reaction mixture after test cleavage (see Supporting Information File 1, Figure S1). However, deboronation and dehalogenation were observed as side reactions to some extent as well as oxidation, most likely of methionine (Met) [79]. The

• oxidation could be minimised by improved cleavage conditions under argon. Replacing sSPhos by tri(o-tolyl)phosphine (P(o-Tol)3), that had successfully been applied for peptide cyclisation by on-resin SMC [78][80], led to incomplete conversion. The cyclisation of the same peptide with the regioisomer 6

• stability of both peptides P5 and P6 was tested against proteinase K digestion. Whilst the linear analogue P6 is cleaved within a period of 120 min to give three fragments, the stapled peptide P5 allows access to only one of the three cleavage sites: i.e., proteolysis of the Leu–Asp bond within the

DABCO-promoted photocatalytic C–H functionalization of aldehydes

• Bruno Maia da Silva Santos,
• Mariana dos Santos Dupim,
• Cauê Paula de Souza,
• Thiago Messias Cardozo and
• Fernanda Gadini Finelli

Beilstein J. Org. Chem. 2021, 17, 2959–2967, doi:10.3762/bjoc.17.205

• a reactive species, often used in catalytic amounts, capable of promoting a highly selective homolytic cleavage of the C–H bond that results in a carbon-centered radical [5][6]. Nitrogenated structures are easily oxidized under mild conditions into their radical or radical cation forms [7], being

A photochemical C=C cleavage process: toward access to backbone N-formyl peptides

• Haopei Wang and
• Zachary T. Ball

Beilstein J. Org. Chem. 2021, 17, 2932–2938, doi:10.3762/bjoc.17.202

• are relatively common, access to photo-responsive modifications of backbone N–H bonds is quite limited. This letter describes a new photocleavage pathway, affording N-formyl amides from vinylogous nitroaryl precursors under physiologically relevant conditions via a formal oxidative C=C cleavage. The N

• -formyl amide products have unique properties and reactivity, but are difficult or impossible to access by traditional synthetic approaches. Keywords: formyl peptide; nitroaryl compound; nitroso compound; olefin cleavage; photocleavage; Findings The photochemistry of nitroaromatic functional groups has

• -nitroaryl compounds. Various 2-nitrobenzyl derivatives are used to photocage heteroatom functional groups, including alcohols, amines, carboxylic acids, and phosphates [11]. Typical photochemical pathways result in cleavage of a benzylic C–X bond following initial benzylic H-atom abstraction [11][13]. In

First total synthesis of hoshinoamide A

• Haipin Zhou,
• Zihan Rui,
• Yiming Yang,
• Shengtao Xu,
• Yutian Shao and
• Long Liu

Beilstein J. Org. Chem. 2021, 17, 2924–2931, doi:10.3762/bjoc.17.201

• in DMF (20 mL) for 30 min and then filtered. The resin was washed with CH2Cl2 (20 mL × 5) and CH3OH (20 mL × 5). General procedures for cleavage the peptide from the resin: 0.5% TFA in DCM (20 mL) were added on the resin and the mixture was shaken for 2 h before filtered. The resin was washed with

Iron-catalyzed domino coupling reactions of π-systems

• Austin Pounder and
• William Tam

Beilstein J. Org. Chem. 2021, 17, 2848–2893, doi:10.3762/bjoc.17.196

• the 1,6-enyne 35 followed by reductive elimination of the carbon nucleophile 38. Interestingly, this reaction proceeds via the cleavage of heteroelements and activated C–C bonds prior to reductive elimination of the metallacyclic ate-complex, resulting in the net formation of two new C–C bonds

• products in appreciable yield. Alkenyl fluoride, chloride, and bromide substrates 51/52 were found to be amenable to the reaction although with varying degrees of success, likely due to the competing base-promoted 1,2-elimination. With the cyclopropylidene-functionalized substrates 50a, ring-cleavage led

• isotope studies revealed the cleavage of the C(sp3)–H bond may be involved in the rate-determining step of this transformation. Mechanistically, prototypical homolysis of the peroxide in the presence of the Fe(II) catalyst will generate the alkyl radical 78 formed via hydrogen abstraction. The

Selective sulfonylation and isonitrilation of para-quinone methides employing TosMIC as a source of sulfonyl group or isonitrile group

• Chuanhua Qu,
• Run Huang,
• Yong Li,
• Tong Liu,
• Yuan Chen and
• Guiting Song

Beilstein J. Org. Chem. 2021, 17, 2822–2831, doi:10.3762/bjoc.17.193

• standard conditions, the desired products 3b or 4b were obtained with yields of 92% and 88%, respectively. Second, the sulfonylated diarylmethane 3b obtained through the C–S bond-cleavage sulfonylation reaction is a versatile building block for preparing diarylmethane derivatives through a nucleophilic

• acids via a triphenylphosphine-mediated deoxygenation process, followed by reaction with sulfonylated diarylmethane 3b to obtain diarylmethane ketone derivatives 6 and 7 [53]. To gain mechanistic insight into this C–S-bond cleavage sulfonylation reaction, some control experiments were conducted (Scheme

• is exemplified in Scheme 6C. The sulfonylation reaction starts with ZnI2/base system mediated C–S-bond cleavage of TosMIC derivative 2c to yield Ts anion II, in which 2c acts as the sulfonyl source. Finally, the sulfonylated diarylmethane 3a is formed by a sequential addition/aromatization process

Highly stereocontrolled total synthesis of racemic codonopsinol B through isoxazolidine-4,5-diol vinylation

• Lukáš Ďurina,
• Anna Ďurinová,
• František Trejtnar,
• Ľuboš Janotka,
• Lucia Messingerová,
• Jana Doháňošová,
• Ján Moncol and
• Róbert Fischer

Beilstein J. Org. Chem. 2021, 17, 2781–2786, doi:10.3762/bjoc.17.188

• the expected high syn diol diastereoselectivity (Scheme 1). The obtained anti,syn-(hydroxyamino)alkenol 4 will be then subjected to reductive cleavage of the N–O bond. Next, a key intermediate epoxide 5 with the desired syn (threo) configuration between the hydroxy group and the epoxide oxygen could