Chiral terpene auxiliaries V: Synthesis of new chiral γ-hydroxyphosphine oxides derived from α-pinene

• Anna Kmieciak and
• Marek P. Krzemiński

Beilstein J. Org. Chem. 2019, 15, 2493–2499, doi:10.3762/bjoc.15.242

• sodium carbonate to give (+)-3-methyleneverbanone (5) in 57% yield from 3. α,β-Unsaturated ketone 5 was exclusively reduced to allylic alcohol (1R,2R,4S,5R)-3-methyleneneoisoverbanol (6), using the Luche method [24]. 1,2-Reduction of enone 5 was achieved with sodium borohydride in the presence of cerium

• (III) chloride in methanol in 88% yield (Scheme 1). The synthesis of allylic alcohol 11, a regioisomer of 6, started again from (1R)-α-pinene (1, Scheme 2). Hydroboration of (1R)-α-pinene with borane–dimethyl sulfide adduct (BMS) and crystallization of the product diisopinocampheylborane (dIpc2BH, 84

• to the allylic alcohol. Thus, Claisen condensation of 8 with ethyl formate gave β-hydroxyenone 9, which was subjected to transaldolization with formaldehyde producing the corresponding 4-methyleneisopinocamphone (10) in 83% yield. Luche reduction of the latter compound provided (1R,2R,3R,5R)-4

Synthesis of acremines A, B and F and studies on the bisacremines

• Nils Winter and
• Dirk Trauner

Beilstein J. Org. Chem. 2019, 15, 2271–2276, doi:10.3762/bjoc.15.219

• later stage the optical purity could be improved (see below). Diol protection gave dioxolane 14, which underwent Saegusa oxidation to afford enone 15. Subsequent α-iodination gave access to α-iodoenone 16, which could be stereoselectively reduced under Corey–Itsuno conditions to yield allylic alcohol 17

• biogenetic precursor of acremines A (1) and B (2), we wanted to access these antifungal derivatives through selective oxidations. Indeed, treatment of 5 with IBX preferentially oxidized the C1-allylic alcohol, giving 1 in respectable yield. Prolonged treatment (9 h) of 5 with a large excess of IBX oxidized

• elimination of the tertiary allylic alcohol to the unstable triene 6. As we were able to observe elimination as well as acetate incorporation into the molecule the desired cation was clearly formed under a variety of conditions. Nevertheless, none of these could affect the desired cyclization. Attempts to

A review of the total syntheses of triptolide

• Xiang Zhang,
• Zaozao Xiao and
• Hongtao Xu

Beilstein J. Org. Chem. 2019, 15, 1984–1995, doi:10.3762/bjoc.15.194

• cationic polyene cyclization, transition-metal- or photocatalyst-mediated radical polyene cyclization [72]. The key to such transformation is to install a proper initiator within the substrate such as an allylic alcohol, an acetal, an aziridine, an N-acetal, a hydroxylactam, or a 1,3-dicarbonyl moiety. van

• and reacted with 3,3-dimethylallyl bromide, followed by changing the protecting group from MOM ether to methyl ether to provide olefin 86. Allylic oxidation of 86 followed by nucleophilic bromination of the resulting allylic alcohol gave bromide 87. Dianion displacement of the bromide of 87 gave ester

Synthesis and biological investigation of (+)-3-hydroxymethylartemisinin

• Toni Smeilus,
• Farnoush Mousavizadeh,
• Johannes Krieger,
• Xingzhao Tu,
• Marcel Kaiser and
• Athanassios Giannis

Beilstein J. Org. Chem. 2019, 15, 567–570, doi:10.3762/bjoc.15.51

• -hydroxymethylartemisinin (2, Figure 1). Results and Discussion Our synthesis (Scheme 1) started from the known and readily available aldehyde 3 [14] which was treated with the organolithium species obtained from derivative 4 [15] and n-BuLi to yield derivative 5. The latter afforded allylic alcohol 6 after reduction of

Synthesis of nonracemic hydroxyglutamic acids

• Dorota G. Piotrowska,
• Iwona E. Głowacka,
• Andrzej E. Wróblewski and
• Liwia Lubowiecka

Beilstein J. Org. Chem. 2019, 15, 236–255, doi:10.3762/bjoc.15.22

• (Scheme 11) [60]. Sharpless epoxidation of the allylic alcohol 48 gave a 46:11:33 mixture of (S)-48, (3R,4S)-49 and (2R,3R)-50. While (S)-48 is a product of kinetic resolution, the formation of (2R,3R)-50 results from the intramolecular opening of the oxirane ring in (3R,4S)-49. After chromatographic

6’-Fluoro[4.3.0]bicyclo nucleic acid: synthesis, biophysical properties and molecular dynamics simulations

• Sibylle Frei,
• Andrei Istrate and
• Christian J. Leumann

Beilstein J. Org. Chem. 2018, 14, 3088–3097, doi:10.3762/bjoc.14.288

• . The relative configuration at C(5’) could be assigned by 1H,1H-ROESY experiments (Supporting Information File 1). Tritylation of allylic alcohol 8 with 4,4-dimethoxytrityl chloride (DMTr-Cl) afforded intermediate 9 which was subsequently phosphitylated with 2-cyanoethyl N,N

• of the nucleobase was partially removed. As a consequence an additional benzoylation step was needed to obtain the allylic alcohol 14 in high yields. Verification of the configuration at C(5’) was again accomplished by 1H,1H-ROESY experiments (Supporting Information File 1). Tritylation of the

A tutorial review of stereoretentive olefin metathesis based on ruthenium dithiolate catalysts

• Daniel S. Müller,
• Olivier Baslé and
• Marc Mauduit

Beilstein J. Org. Chem. 2018, 14, 2999–3010, doi:10.3762/bjoc.14.279

• catalyst loading Scheme 2b) [2]. Allylic alcohol (7) reacted cleanly with norbornene (1), albeit with lower stereoretention (8; 88:12 Z/E) [17]. Cyclobutenes (e.g., 9) and cyclopropenes also delivered the corresponding products with good yields and excellent selectivity (Scheme 2b) [17]. It should also be

• allylic alcohol. Allylic oxygen atoms often have an activating effect in metathesis [23]. This was confirmed by Hoveyda for stereoretentive metathesis by exposing homoallylic alcohol (product Z-45) and alkyl containing metathesis partners (products Z-46 and E-47) to standard reaction conditions [22]. All

• the reactions were inefficient emphasizing the importance of an allylic alcohol, ether or acetate group. 7 The in situ catalyst synthesis strategy Very recently, our group developed an in situ synthesis of dithiolate catalysts with the aim to avoid tedious isolation of Ru-dithiolate catalysts and to

Photocatalyic Appel reaction enabled by copper-based complexes in continuous flow

• Clémentine Minozzi,
• Jean-Christophe Grenier-Petel,
• Shawn Parisien-Collette and
• Shawn K. Collins

Beilstein J. Org. Chem. 2018, 14, 2730–2736, doi:10.3762/bjoc.14.251

• corresponding dibromide could be formed from 1,9-nonadiol (6) in quantitative yield (99%, Table 1, entry 4). A sulfur-containing alcohol 7 was smoothly converted to its bromide in 99% yield (Table 1, entry 5). An allylic alcohol 8 having a cis-olefin underwent alcohol-to-halide conversion in 89% yield and was

• % yield, Table 3, entry 2). A methyl ester 5, allylic alcohol 8 and racemic secondary alcohol 9 could all undergo conversion to their corresponding bromides in 240 min using the continuous flow protocol (Table 3, entries 3 to 5). The continuous flow protocol was also applicable to the synthesis of

Stereoselective total synthesis and structural revision of the diacetylenic diol natural products strongylodiols H and I

• Pamarthi Gangadhar,
• Sayini Ramakrishna,
• Ponneri Venkateswarlu and
• Pabbaraja Srihari

Beilstein J. Org. Chem. 2018, 14, 2313–2320, doi:10.3762/bjoc.14.206

• -selective reduction [25] of alkyne 20 was easily achieved with sodium bis(2-methoxyethoxy)aluminum hydride (Red-Al) as a hydride-transfer reagent to furnish the corresponding (E)-allylic alcohol 23. A Swern oxidation of 23 provided the corresponding aldehyde which was subjected to an addition reaction with

Heterogeneous acidic catalysts for the tetrahydropyranylation of alcohols and phenols in green ethereal solvents

• Ugo Azzena,
• Massimo Carraro,
• Gloria Modugno,
• Luisa Pisano and
• Luigi Urtis

Beilstein J. Org. Chem. 2018, 14, 1655–1659, doi:10.3762/bjoc.14.141

• isomerisation of the acid-sensitive allylic alcohol 1j [34]. To stress the usefulness of a tetrahydropyranylation reaction performed in a green ethereal solvent and in the presence of a heterogeneous acidic catalyst, we realized two one-pot procedures employing either 2-MeTHF or CPME as a solvent. Accordingly

Biocatalytic synthesis of the Green Note trans-2-hexenal in a continuous-flow microreactor

• Morten M. C. H. van Schie,
• Tiago Pedroso de Almeida,
• Gabriele Laudadio,
• Florian Tieves,
• Elena Fernández-Fueyo,
• Timothy Noël,
• Isabel W. C. E. Arends and
• Frank Hollmann

Beilstein J. Org. Chem. 2018, 14, 697–703, doi:10.3762/bjoc.14.58

• beverages. One attractive access to trans-2-hex-2-enal is the oxidation of the corresponding allylic alcohol to the aldehyde. Though at first sight an oxidation of primary alcohols to the corresponding aldehydes does not appear to be a major challenge, the methods of the state-of-the-art are mostly plagued

Novel amide-functionalized chloramphenicol base bifunctional organocatalysts for enantioselective alcoholysis of meso-cyclic anhydrides

• Lingjun Xu,
• Shuwen Han,
• Linjie Yan,
• Haifeng Wang,
• Haihui Peng and
• Fener Chen

Beilstein J. Org. Chem. 2018, 14, 309–317, doi:10.3762/bjoc.14.19

• different alcohols (Table 3). Excellent yields with high enantioselectivities were obtained in all cases. The sterically more bulky 2-propanol worked well in this reaction. Allylic alcohol, benzyl alcohol and cinnamyl alcohol were also well compatible in this bifunctional organocatalysis conditions to

CF₃SO₂X (X = Na, Cl) as reagents for trifluoromethylation, trifluoromethylsulfenyl-, -sulfinyl- and -sulfonylation. Part 1: Use of CF₃SO₂Na

• Hélène Guyon,
• Hélène Chachignon and
• Dominique Cahard

Beilstein J. Org. Chem. 2017, 13, 2764–2799, doi:10.3762/bjoc.13.272

Homologated amino acids with three vicinal fluorines positioned along the backbone: development of a stereoselective synthesis

• Raju Cheerlavancha,
• Ahmed Ahmed,
• Yun Cheuk Leung,
• Aggie Lawer,
• Qing-Quan Liu,
• Marina Cagnes,
• Hee-Chan Jang,
• Xiang-Guo Hu and
• Luke Hunter

Beilstein J. Org. Chem. 2017, 13, 2316–2325, doi:10.3762/bjoc.13.228

• fluoride, then deoxyfluorination). We therefore sought to apply O’Hagan’s method to the target 6b (Scheme 3, boxed). Accordingly, the enantiopure allylic alcohol 27 [35] was extended through a cross-metathesis reaction to deliver the disubstituted alkene 30 (Scheme 3). Compound 30 became the substrate for

Mechanically induced oxidation of alcohols to aldehydes and ketones in ambient air: Revisiting TEMPO-assisted oxidations

• Andrea Porcheddu,
• Evelina Colacino,
• Giancarlo Cravotto,
• Francesco Delogu and
• Lidia De Luca

Beilstein J. Org. Chem. 2017, 13, 2049–2055, doi:10.3762/bjoc.13.202

• oxidative procedure was also applied to allylic alcohol derivatives. Cinnamyl alcohol (1m) was transformed into the corresponding α,β-unsaturated aldehyde in an excellent yield (96%) and with the stereochemical retention of the double bond. Encouraged by these promising results, we attempted to oxidise

Pd(OAc)₂/Ph₃P-catalyzed dimerization of isoprene and synthesis of monoterpenic heterocycles

• Dominik Kellner,
• Maximilian Weger,
• Andrea Gini and
• Olga García Mancheño

Beilstein J. Org. Chem. 2017, 13, 1807–1815, doi:10.3762/bjoc.13.175

• the tail-to-tail linkage [15][29]. Moreover, the naturally occurring head-to-tail 2-HT dimers, myrcene and ocimene, can be obtained in allylic alcohol when employing Pd(NO3)2/Ph3P/KOPh as catalytic system [30]. The head-to-head 2-HH dimer could also be prepared as major isomer under catalysis with the

The chemistry and biology of mycolactones

• Matthias Gehringer and
• Karl-Heinz Altmann

Beilstein J. Org. Chem. 2017, 13, 1596–1660, doi:10.3762/bjoc.13.159

Base-promoted isomerization of CF₃-containing allylic alcohols to the corresponding saturated ketones under metal-free conditions

• Yoko Hamada,
• Tomoko Kawasaki-Takasuka and
• Takashi Yamazaki

Beilstein J. Org. Chem. 2017, 13, 1507–1512, doi:10.3762/bjoc.13.149

• the alkoxide 3F-Oa. In the case of 1Fb, the phenyl group worked nicely for increase of the energetic preference of 3F-Cb to 3F-Ob of about 7.9 kcal/mol. For the allylic alcohol 2Fb (R = Ph), although the ΔΔE value was small, the carbanionic species 4F-Cb was calculated to be more (or at least almost

• excess amount of CsF, the resultant product (E)-2Fb was further converted in situ to the corresponding saturated ketone (E)-5b (R = Ph). Confirmation of this process was performed by the action of DBU, resulting in 95% conversion of the starting allylic alcohol (E)-2Fb [14]. Quite recently [15], the same

• shown in Table 2, we at first checked a type of bases suitable for this isomerization in THF under reflux for 3 h. Although Et3N was appropriate in the case of isomerization of propargylic alcohols 1F [1], this was not the case for the allylic alcohol (E)-6a, forming the desired 7a only in a trace

Total synthesis of elansolids B1 and B2

• Liang-Liang Wang and
• Andreas Kirschning

Beilstein J. Org. Chem. 2017, 13, 1280–1287, doi:10.3762/bjoc.13.124

• intramolecular Diels–Alder (IMDA) cycloaddition as key step to construct the tetrahydroindane unit (Scheme 1) [7]. An enone, derived from allylic alcohol 8 served as precursor to yield tetrahydroindane 9 with excellent diastereocontrol at −25 °C. The major drawback of our first total synthesis of elansolid B1 (2

Phosphazene-catalyzed desymmetrization of cyclohexadienones by dithiane addition

• Matthew A. Horwitz,
• Elisabetta Massolo and
• Jeffrey S. Johnson

Beilstein J. Org. Chem. 2017, 13, 762–767, doi:10.3762/bjoc.13.75

• nucleophile. Mild reaction conditions allow the formation of diversely functionalized fused bicyclic lactones. The products participate in facially selective additions from the convex surface, leading to allylic alcohol derivatives. Keywords: conjugate addition; cyclohexadienones; dearomatization

• for general concern about the feasibility of easily reaching the target substructure. In order to minimize the observed side reactions, we sought to apply the deprotection conditions to allylic alcohol 3. However, both the use of NBS and HgCl2/HgO were unsuccessful. We further investigated the removal

Studies directed toward the exploitation of vicinal diols in the synthesis of (+)-nebivolol intermediates

• Runjun Devi and
• Sajal Kumar Das

Beilstein J. Org. Chem. 2017, 13, 571–578, doi:10.3762/bjoc.13.56

•  1, method 1). For this purpose, the necessary epoxide 6 could be obtained from the parent E-allylic alcohol through Sharpless asymmetric epoxidation (SAE) [11]. However, the corresponding parent Z-allylic alcohol appears to be not suitable to provide 7 under SAE conditions [20]. This has eliminated

• the resulting crude aldehyde with Ph3P=CHCO2Et provided (E)-α,β-unsaturated ester 12 (80% over two steps). A further DIBAL-H (2.5 equiv, 0 °C) reduction of 12 delivered (E)-allylic alcohol 13 (90%) which was then dihydroxylated under Upjohn conditions to obtain triol (±)-14 (92%). With access to

Revaluation of biomass-derived furfuryl alcohol derivatives for the synthesis of carbocyclic nucleoside phosphonate analogues

• Bemba Sidi Mohamed,
• Christian Périgaud and
• Christophe Mathé

Beilstein J. Org. Chem. 2017, 13, 251–256, doi:10.3762/bjoc.13.28

• observations are in agreement with a 1,3-allylic transposition under acidic conditions. Additionally, in order to confirm the stereochemistry of the allylic alcohol in position 3’, a NOESY correlation experiment was accomplished with compound (+/−)-16 (Figure 3). We have observed a correlation between proton

First DMAP-mediated direct conversion of Morita–Baylis–Hillman alcohols into γ-ketoallylphosphonates: Synthesis of γ-aminoallylphosphonates

• Marwa Ayadi,
• Haitham Elleuch,
• Emmanuel Vrancken and
• Farhat Rezgui

Beilstein J. Org. Chem. 2016, 12, 2906–2915, doi:10.3762/bjoc.12.290

• , entries 1–5), as well as five-membered cyclic MBH alcohol 1f (Table 2, entry 6). A putative reaction pathway could start from a first β-conjugate addition of DMAP onto the allylic alcohol 1a (i), followed by the elimination of the hydroxide ion that would afford the intermediate I (ii). Similarly, a

Synthesis of polyhydroxylated decalins via two consecutive one-pot reactions: 1,4-addition/aldol reaction followed by RCM/syn-dihydroxylation

• Michał Malik and
• Sławomir Jarosz

Beilstein J. Org. Chem. 2016, 12, 2602–2608, doi:10.3762/bjoc.12.255

• most likely unstable, we decided to deprotect 20 directly before the planned one-pot procedure and use it without purification. In order to obtain (R)-10, we decided to inverse the configuration at the free hydroxy group in allylic alcohol 19 by Mitsunobu reaction. Despite the fact that the use of

Et₃B-mediated and palladium-catalyzed direct allylation of β-dicarbonyl compounds with Morita–Baylis–Hillman alcohols

• Ahlem Abidi,
• Yosra Oueslati and
• Farhat Rezgui

Beilstein J. Org. Chem. 2016, 12, 2402–2409, doi:10.3762/bjoc.12.234

• further used as synthetic intermediates in numerous synthetic routes to heterocyclic compounds and molecules of biological interest [41][42]. Results and Discussion We first investigated the allylation of diethyl malonate (2a) with the allylic alcohol 1a in DMF in the presence of Pd(OAc)2 (10 mol %), PPh3

• malonate (2a), the malonate derivative 2b (pKa = 13) [29] similarly reacted with the allylic alcohol 1a in the presence of the catalytic system Pd(0)/Et3B to exclusively give the mono-allylated product 3a in 65% yield, whereas the same reaction with ethyl 3-cyano-3-oxopropanoate (2c, pKa = 10.7) [43] whose

• added successively the 1,3-dicarbonyl compound 2 (1.1 mmol), NaH (1 mmol) and an Et3B solution 1.0 M (2 to 3 mmol) in THF. The mixture was stirred for 5 to 10 min at room temperature, then the MBH allylic alcohol 1a or 1b (1 mmol) was added. The mixture was stirred and heated at 80 °C for 3 to 6 h