Aerobic synthesis of N-sulfonylamidines mediated by N-heterocyclic carbene copper(I) catalysts

• Faïma Lazreg,
• Marie Vasseur,
• Alexandra M. Z. Slawin and
• Catherine S. J. Cazin

Beilstein J. Org. Chem. 2020, 16, 482–491, doi:10.3762/bjoc.16.43

• minutes, 80% conversion into the sulfonamidine product was observed. Of note, the presence of sulfonyltriazole was also observed (10%). Conclusion Cationic bis-carbene copper(I) complexes were shown to promote the formation of N-sulfonamidines in a Click reaction [35][36]. The new developed mesoionic NHC

Photophysics and photochemistry of NIR absorbers derived from cyanines: key to new technologies based on chemistry 4.0

• Bernd Strehmel,
• Christian Schmitz,
• Ceren Kütahya,
• Yulian Pang,
• Anke Drewitz and
• Heinz Mustroph

Beilstein J. Org. Chem. 2020, 16, 415–444, doi:10.3762/bjoc.16.40

Architecture and synthesis of P,N-heterocyclic phosphine ligands

• Wisdom A. Munzeiwa,
• Bernard Omondi and
• Vincent O. Nyamori

Beilstein J. Org. Chem. 2020, 16, 362–383, doi:10.3762/bjoc.16.35

• alkyne–azide cycloaddition reaction has been applied successfully to prepare click-phosphine ligands [72]. The presence of three nitrogen atoms within the five-membered ring results in a high activation of the α-position and the highly acidic nature of the proton makes it easy for abstraction. Sharpless

• were induced by reacting with zinc iodide and they could exist in the complexed state as structures 115 and 116. The substituents on the amine nitrogen affect the reaction conditions as well as the stability of the P–N bond. Wassenaar et al. [22] reported on a flexible click-phosphine ligand (120

• stable up to 200 °C [109][110]. In these reactions the phosphine precursor can also be functionalized with appropriate groups for postfunctionalization. Detz et al. attached an alkyne to a phosphine which could easily be transformed to triazoles using click chemistry (Scheme 26) [111]. The click

Halogen-bonding-induced diverse aggregation of 4,5-diiodo-1,2,3-triazolium salts with different anions

• Xingyu Xu,
• Shiqing Huang,
• Zengyu Zhang,
• Lei Cao and
• Xiaoyu Yan

Beilstein J. Org. Chem. 2020, 16, 78–87, doi:10.3762/bjoc.16.10

• candidates for XB donors, which is mainly due to the ease of preparation via a copper-catalyzed click reaction between azide and alkyne [38][39]. 1,2,3-Triazoles and 1,2,3-triazolium-based XB activators have been found applications in catalytic reactions [40][41] and anion recognition [42]. Recently, we

Influence of the cis/trans configuration on the supramolecular aggregation of aryltriazoles

• Sara Tejera,
• Giada Caniglia,
• Rosa L. Dorta,
• Andrea Favero,
• Javier González-Platas and
• Jesús T. Vázquez

Beilstein J. Org. Chem. 2019, 15, 2881–2888, doi:10.3762/bjoc.15.282

• - and cis-1,2-glucopyranosyl and cyclohexyl ditriazoles, synthesized by CuAAC "click" chemistry, to form gels was studied, their physical properties determined, and the self-aggregation behavior investigated by SEM, X-ray, and EDC studies. The results revealed that self-assembly was driven mainly by π–π

• "click" chemistry [16][17][18] of azides and alkynes catalyzed by Cu(I) salts, the CuAAC reaction. Self-assembling properties were not observed for any of the prepared monotriazoles, namely the 4-substituted 1-glucopyranosyltriazoles 1a–g and 2a–g (Scheme 1) [15]. However, most ditriazoles 7a–g and 8a–g

Diversity-oriented synthesis of spirothiazolidinediones and their biological evaluation

• Sambasivarao Kotha,
• Gaddamedi Sreevani,
• Lilya U. Dzhemileva,
• Milyausha M. Yunusbaeva,
• Usein M. Dzhemilev and
• Vladimir A. D’yakonov

Beilstein J. Org. Chem. 2019, 15, 2774–2781, doi:10.3762/bjoc.15.269

• spirothiazolidinediones via a [2 + 2 + 2] cyclotrimerization reaction and the derivatives were further functionalized through DA chemistry and click reaction. Using flow cytometry, it was shown for the first time that the new benzyl alcohol derivatives of thiazolidine-2,4-dione generated here are efficient apoptosis

• various diseases. Hence, we also modified the N-propargyl alcohol derivative 21 to 1,2,3-triazolo alcohol derivative 24 by click chemistry using 4-nitrophenyl azide (23) and the corresponding triazolo alcohol derivative 24 was obtained as yellow solid in 80% yield (Scheme 9) [58]. All alcohol derivatives

• by DA reaction. Dipropargylation of 2,4-thiazolidinedione derivatives. [2 + 2 + 2] Cycloaddition in the presence of Wilkinson’s catalyst. N-Ester derivative 18 hydrolysis to N-acid derivative 22. Synthesis of triazolo derivative 24 via click reaction. Supporting Information Supporting Information

Fluorinated maleimide-substituted porphyrins and chlorins: synthesis and characterization

• Valentina A. Ol’shevskaya,
• Elena G. Kononova and
• Andrei V. Zaitsev

Beilstein J. Org. Chem. 2019, 15, 2704–2709, doi:10.3762/bjoc.15.263

• ) or Ni(II) with N-propargylmaleimide via the CuAAC click reaction to afford fluorinated porphyrin–triazole–maleimide conjugates. New maleimide derivatives were isolated in reasonable yields and identified by UV–vis, 1H NMR, 19F NMR spectroscopy and mass-spectrometry. Keywords: chlorin; maleimide

A new approach to silicon rhodamines by Suzuki–Miyaura coupling – scope and limitations

• Thines Kanagasundaram,
• Antje Timmermann,
• Carsten S. Kramer and
• Klaus Kopka

Beilstein J. Org. Chem. 2019, 15, 2569–2576, doi:10.3762/bjoc.15.250

• resulting rhodamine 28c could be a possible substrate for the conversion into an azide and follow-up click reactions with alkyne-substituted tumor vectors. While heating of amine 28a to the corresponding boroxine 28b lead to formation of a brown solid (presumably due to degradation), the reaction of

Targeted photoswitchable imaging of intracellular glutathione by a photochromic glycosheet sensor

• Xianzhi Chai,
• Hai-Hao Han,
• Yi Zang,
• Jia Li,
• Xiao-Peng He,
• Junji Zhang and
• He Tian

Beilstein J. Org. Chem. 2019, 15, 2380–2389, doi:10.3762/bjoc.15.230

• 4 according to reported methods [27]. Then, the photochromic fluorophore intermediate 7 was synthesized by coupling compounds 3 and 6 through amidation. The Glyco-DTE reporter was prepared by click reaction between compound 7 and acetylated β-ᴅ-galactoside, followed by deacetylation. Similarly, a

Click chemistry towards thermally reversible photochromic 4,5-bisthiazolyl-1,2,3-triazoles

• Chenxia Zhang,
• Kaori Morinaka,
• Mahmut Kose,
• Takashi Ubukata and
• Yasushi Yokoyama

Beilstein J. Org. Chem. 2019, 15, 2161–2169, doi:10.3762/bjoc.15.213

• century, Sharpless and co-workers proposed the concept of “click chemistry” [14], which stands for the secure, quick, selective, general and facile reaction between two organic functional groups. In click chemistry, the Huisgen cyclization, which occurs between an organic azide and a terminal alkyne

• “click” reaction. They showed thermally reversible photochromism in various solvents. The absorption maximum wavelengths of 1c (with unsubstituted peripheral phenyl groups) and 2c (with methoxy groups on the phenyl groups) are close to 700 nm, while that of 3c (with cyano groups on the phenyl groups) was

1,2,3-Triazolium macrocycles in supramolecular chemistry

• Mastaneh Safarnejad Shad,
• Pulikkal Veettil Santhini and
• Wim Dehaen

Beilstein J. Org. Chem. 2019, 15, 2142–2155, doi:10.3762/bjoc.15.211

• macrocycles and focus on their application in different areas of supramolecular chemistry. The synthesis is mostly relying on the well-known “click reaction” (CuAAC) leading to 1,4-disubstituted 1,2,3-triazoles that then can be quaternized. Applications of triazolium macrocycles thus prepared include

• receptors for molecular recognition of anionic species, pH sensors, mechanically interlocked molecules, molecular machines, and molecular reactors. Keywords: anion recognition; catenane; chalcogen bonding; click reaction; molecular reactor; hydrogen bonding; pH sensor; rotaxane; supramolecular; 1,2,3

• (iodine, bromine) and chalcogens (selenium and tellurium) [18]. While there are several strategies for the synthesis of triazoles, the Cu(II)-catalyzed azide–alkyne cycloaddition reaction (CuAAC click reaction) is considered as one of the most efficient, simple and mild approaches towards the preparation

Archangelolide: A sesquiterpene lactone with immunobiological potential from Laserpitium archangelica

• Silvie Rimpelová,
• Michal Jurášek,
• Lucie Peterková,
• Jiří Bejček,
• Vojtěch Spiwok,
• Miloš Majdl,
• Michal Jirásko,
• Miloš Buděšínský,
• Juraj Harmatha,
• Eva Kmoníčková,
• Pavel Drašar and
• Tomáš Ruml

Beilstein J. Org. Chem. 2019, 15, 1933–1944, doi:10.3762/bjoc.15.189

• hydroxy group more acidic and thus a better leaving group in the reaction. Next, the quaternary 11α-hydroxy group was acylated by freshly prepared 5-azidopentanoic anhydride in the presence of 4-DMAP at room temperature. Finally, the azidopentanoate 4 was successively introduced into a click reaction with

Morphology-tunable and pH-responsive supramolecular self-assemblies based on AB₂-type host–guest-conjugated amphiphilic molecules for controlled drug delivery

• Yang Bai,
• Cai-ping Liu,
• Di Chen,
• Long-hai Zhuo,
• Huai-tian Bu and
• Wei Tian

Beilstein J. Org. Chem. 2019, 15, 1925–1932, doi:10.3762/bjoc.15.188

• on pH-responsive supramolecular self-assemblies by utilizing β-CD-benzimidazole2 (β-CD-BM2) as AB2-type amphiphilic HGCMs for the delivery and controlled release of doxorubicin (DOX). β-CD-BM2 was first synthesized by click reaction (Scheme 1a). β-CD-BM2 formed fan-shaped self-assemblies (FSSAs) at

• the characteristic signals for BM and propargyl groups in 1H NMR spectrum (Figure S1B-c, Supporting Information File 1), accompanied with the GC–MS results (156.1), indicated the successful preparation of BM-Alk. Finally, the targeted monomer β-CD-BM2 was synthesized through the click reaction between

Installation of -SO₂F groups onto primary amides

• Jing Liu,
• Shi-Meng Wang,
• Njud S. Alharbi and
• Hua-Li Qin

Beilstein J. Org. Chem. 2019, 15, 1907–1912, doi:10.3762/bjoc.15.186

• Sciences, Faculty of Science, King Abdulaziz University, Jeddah, Saudi Arabia 10.3762/bjoc.15.186 Abstract A protocol of SO2F2-mediated installation of sulfonyl fluoride onto primary amides has been developed providing a new portal to sulfur(VI) fluoride exchange (SuFEx) click chemistry. The generated

• molecules contain pharmaceutically important amide and -SO2F moieties for application in the discovery of new therapeutics. Keywords: N-fluorosulfonyl amides; primary amides; sulfuryl fluoride (SO2F2); Introduction Sulfur(VI) fluoride exchange (SuFEx) is a new class of click chemistry developed by

• novel sulfonyl fluorides for SuFEx click chemistry with great potential to be applied in the development of covalent inhibitors. Further studies of this class of molecules in chemical biology and drug discovery are underway in our laboratory. Representative sulfonyl fluoride compounds applied in

Recent advances on the transition-metal-catalyzed synthesis of imidazopyridines: an updated coverage

• Gagandeep Kour Reen,
• Ashok Kumar and
• Pratibha Sharma

Beilstein J. Org. Chem. 2019, 15, 1612–1704, doi:10.3762/bjoc.15.165

• product. This was an unprecedented report for the synthesis of a library of targeted moieties using a nano-click catalyst. The triazole precursor was also synthesized by the group using nano-copper oxide in an aqueous medium. The reaction has well tolerated variedly substituted starting materials whether

Synthesis, enantioseparation and photophysical properties of planar-chiral pillar[5]arene derivatives bearing fluorophore fragments

• Guojuan Li,
• Chunying Fan,
• Guo Cheng,
• Wanhua Wu and
• Cheng Yang

Beilstein J. Org. Chem. 2019, 15, 1601–1611, doi:10.3762/bjoc.15.164

• derivatives (P5A-DPA and P5A-Py) bearing bulky fluorophores were obtained in high yield by click reaction. The photophysical properties of both compounds were investigated in detail. P5A-DPA with two 9,10-diphenylanthracene (DPA) pigments grafted on the pillar[5]arene showed a high fluorescence quantum yield

• : aggregation; circular dichroism; chirality; click chemistry; macrocycles; pillar[5]arenes; Introduction Planar-chiral compounds are structurally appealing and potentially applicable in various functional materials such as chiral discriminators [1][2], chiral polymers, supramolecular sensors [3] and chiral

• designed and synthesized by click reaction [38][39]. We supposed that the Py or DPA substituents on both rims of the pillar[5]arenes will serve two purposes: Firstly, the molecular sizes of Py and DPA are larger than the cavity size of the pillar[5]arenes (ca. 5.5 Å), and the rotation of the units should

Diaminoterephthalate–α-lipoic acid conjugates with fluorinated residues

• Leon Buschbeck,
• Aleksandra Markovic,
• Gunther Wittstock and
• Jens Christoffers

Beilstein J. Org. Chem. 2019, 15, 981–991, doi:10.3762/bjoc.15.96

• -free click reactions) [14]. The second functional unit, the maleimide moiety, is a reactive probe for mercaptane, which could be, e.g., a protein holding a cysteine residue on its surface [15][16][17]. The successful ligation by conjugated addition can be followed by the changes of the fluorescence

Towards the preparation of synthetic outer membrane vesicle models with micromolar affinity to wheat germ agglutinin using a dialkyl thioglycoside

• Dimitri Fayolle,
• Nathalie Berthet,
• Bastien Doumeche,
• Olivier Renaudet,
• Peter Strazewski and
• Michele Fiore

Beilstein J. Org. Chem. 2019, 15, 937–946, doi:10.3762/bjoc.15.90

• addition of thiols to alkenes – known as thiol–ene coupling, TEC – a very efficient metal-free click reaction [18][19]. We prepared n-alkyl 1-thio-β--glycosides from unprotected sugar anomeric thiols, commercial n-alkenes and one synthetic lipophilic scaffold presenting two reactive alkenyl ends. Although

Easy, efficient and versatile one-pot synthesis of Janus-type-substituted fullerenols

• Marius Kunkel and
• Sebastian Polarz

Beilstein J. Org. Chem. 2019, 15, 901–905, doi:10.3762/bjoc.15.87

• other compounds in further reactions, e.g., click reactions or Sonogashira coupling. Systems for such reactions are tested with compounds 5 and 6. These compounds react in high yields up to 90%. The additional functional groups, which must of course be not base-labile survive the reaction conditions

New α- and β-cyclodextrin derivatives with cinchona alkaloids used in asymmetric organocatalytic reactions

• Iveta Chena Tichá,
• Simona Hybelbauerová and
• Jindřich Jindřich

Beilstein J. Org. Chem. 2019, 15, 830–839, doi:10.3762/bjoc.15.80

• derivatives monosubstituted with cinchona alkaloids (cinchonine, cinchonidine, quinine and quinidine) on the primary rim through a CuAAC click reaction. Subsequently, permethylated analogs of these cinchona alkaloid–CD derivatives also were synthesized and the catalytic activity of all derivatives was

• ; cinchona alkaloids; CuAAC click reaction; cyclodextrin; organocatalysts; Introduction Cyclodextrins (CDs) [1], cyclic oligosaccharides consisting of α-D-glucopyranoside units, and their derivatives are widely used in many industrial and research areas for their ability to form supramolecular inclusion

• asymmetric allylic amination (AAA). We successfully prepared a series of monosubstituted α- and β-CDs derivatives with the cinchona alkaloids cinchonine, cinchonidine, quinine, and quinidine with up to 95% isolated yield through CuAAC click reactions. By this simple, high-yielding and quick method we

Olefin metathesis in multiblock copolymer synthesis

• Maria L. Gringolts,
• Yulia I. Denisova,
• Eugene Sh. Finkelshtein and
• Yaroslav V. Kudryavtsev

Beilstein J. Org. Chem. 2019, 15, 218–235, doi:10.3762/bjoc.15.21

• obtain the ABCBA pentablock copolymers. This copolymer forms nanoparticles with a central hydrophobic core capable of accommodating fluorescent dyes and conventional therapeutics and a hydrophilic biocompatible outer shell. The efficient combination of the ROMP process and click chemistry led to the

• multiple click reactions of the diazido-telechelic PBD with a dialkynyl-containing azobenzene chromophore. The newly formed triazole moieties can tune and improve the photoresponsive properties of PBD. α,ω-Functional telechelic polymers also can be synthesized by acyclic diene metathesis (ADMET

• such as ATRP, RAFT, click-reaction, and so on, which permit to gain certain control over the final copolymer structures. The most recent approach to the multiblock copolymer synthesis implements the macromolecular cross-metathesis reaction, which is still poorly studied. For this method, the simplicity

Synthesis of a tubugi-1-toxin conjugate by a modulizable disulfide linker system with a neuropeptide Y analogue showing selectivity for hY1R-overexpressing tumor cells

• Rainer Kufka,
• Robert Rennert,
• Goran N. Kaluđerović,
• Lutz Weber,
• Wolfgang Richter and
• Ludger A. Wessjohann

Beilstein J. Org. Chem. 2019, 15, 96–105, doi:10.3762/bjoc.15.11

• ][55][56]. In a single step, the Ugi reaction permits the introduction of different functionalities which may be followed with additional modifications on the side chain (e.g., via ring-closing metathesis or Click reaction) [53]. For tubugi conjugates we learned that alkyl amide bonds and several types

Copper(I)-catalyzed tandem reaction: synthesis of 1,4-disubstituted 1,2,3-triazoles from alkyl diacyl peroxides, azidotrimethylsilane, and alkynes

• Muhammad Israr,
• Changqing Ye,
• Munira Taj Muhammad,
• Yajun Li and
• Hongli Bao

Beilstein J. Org. Chem. 2018, 14, 2916–2922, doi:10.3762/bjoc.14.270

• , making this protocol operationally simple. The Cu(I) catalyst not only participates in the alkyl diacyl peroxides decomposition to afford alkyl azides but also catalyzes the subsequent CuAAC reaction to produce the 1,2,3-triazoles. Keywords: alkyl diacyl peroxides; azidotrimethylsilane; click reaction

• ; copper catalysis; radical; 1,2,3-triazoles; Introduction The “click chemistry”, coined by K. B. Sharpless in 2001 [1], is a powerful chemical transformation that has rapidly orthogonalized traditional disciplinary boundaries. With the discovery of “click chemistry”, new fields have been opened for the

• ], derived from the Huisgen’s 1,3-dipolar cycloaddition of azides and alkynes [22], has conceivably emerged as the premier example of click chemistry. Generally, organic azides are used as the azido source in most of the CuAAC reactions (Scheme 1a) [23]. However, the organic azides with low molecular weight

Olefin metathesis catalysts embedded in β-barrel proteins: creating artificial metalloproteins for olefin metathesis

• Daniel F. Sauer,
• Johannes Schiffels,
• Takashi Hayashi,
• Ulrich Schwaneberg and
• Jun Okuda

Beilstein J. Org. Chem. 2018, 14, 2861–2871, doi:10.3762/bjoc.14.265

• NHC ligand. The conjugation was performed via maleimide-thiol “click” reaction under slightly basic (pH 7.5) conditions. Within the small cavity of NB4, only the GH-type catalyst Ru-6 with the longest spacer was able to undergo conjugation; however, the conjugational yield was very low (25%). Within

Enhanced single-isomer separation and pseudoenantiomer resolution of new primary rim heterobifunctionalized α-cyclodextrin derivatives

• Iveta Tichá,
• Gábor Benkovics,
• Milo Malanga and
• Jindřich Jindřich

Beilstein J. Org. Chem. 2018, 14, 2829–2837, doi:10.3762/bjoc.14.261

• amino group able to react with a large variety of electrophiles and is commonly used in click reactions [33]. At first, 6A-azido-α-CD 7 was prepared via bromination of α-CD (as previously described for direct bromination) [28]. Then, 6A-azido-6X-mesitylenesulfonyl-α-CD 8 was prepared (reaction 6, Scheme