Synthesis and characterization of S,N-heterotetracenes

• Astrid Vogt,
• Florian Henne,
• Christoph Wetzel,
• Elena Mena-Osteritz and
• Peter Bäuerle

Beilstein J. Org. Chem. 2020, 16, 2636–2644, doi:10.3762/bjoc.16.214

• nitrogen heteroatoms were synthesized in multistep synthetic routes. A Buchwald–Hartwig amination of brominated precursors, thermolysis of azide precursors, and a Cadogan reaction of nitro-substituted precursors were successfully applied to eventually build-up pyrrole rings to stable and soluble fused

• application in organic electronics. Results and Discussion Synthesis of N-alkylated S,N-heterotetracene 9 by Pd-catalyzed amination. Asymmetric S,N-heterotetracene Hex-SN4 9 comprises the sequence of heteroatoms ‘SSNS’ in the tetracyclic conjugated π-system [37]. In a multistep synthesis, 2,6

• -heterotetracene system SN4'' comprising the heteroatom sequence ‘SNNS’ is built-up by annulation of two ‘outer’ thiophene and two ‘inner’ pyrrole rings resulting in the symmetric sequence of heteroatoms in the tetracyclic conjugated π-system. The multistep synthesis of Pr-SN4'' 33 started from 2

Tools for generating and analyzing glycan microarray data

• Akul Y. Mehta,
• Jamie Heimburg-Molinaro and
• Richard D. Cummings

Beilstein J. Org. Chem. 2020, 16, 2260–2271, doi:10.3762/bjoc.16.187

• comparison of glycan microarray data. We identify a variety of glycan microarray repositories where interested readers can find microarray data to build new software. We also highlight manual and automated data analysis tools. One must always be aware that the intrinsic complexity of the multistep process of

One-pot and metal-free synthesis of 3-arylated-4-nitrophenols via polyfunctionalized cyclohexanones from β-nitrostyrenes

• Haruyasu Asahara,
• Minami Hiraishi and
• Nagatoshi Nishiwaki

Beilstein J. Org. Chem. 2020, 16, 1830–1836, doi:10.3762/bjoc.16.150

• [8][9]. However, these nitration methods are less effective because the yield of the desired product is reduced by the formation of regioisomers. Although the hydroxylation of 3-arylated-1-fluoro-4-nitrobenzene has also been reported as a related strategy, multistep reactions are necessary for

Et₃N/DMSO-supported one-pot synthesis of highly fluorescent β-carboline-linked benzothiophenones via sulfur insertion and estimation of the photophysical properties

• Dharmender Singh,
• Vipin Kumar and
• Virender Singh

Beilstein J. Org. Chem. 2020, 16, 1740–1753, doi:10.3762/bjoc.16.146

• multistep syntheses. To overcome these drawbacks, elemental sulfur has emerged as a surrogate approach, where it can be inserted in situ. In this context, several research groups are actively involved in the development of novel and efficient approaches for the synthesis of sulfur-containing heterocycles

Microwave-assisted efficient one-pot synthesis of N²-(tetrazol-5-yl)-6-aryl/heteroaryl-5,6-dihydro-1,3,5-triazine-2,4-diamines

• Moustafa Sherief Moustafa,
• Ramadan Ahmed Mekheimer,
• Saleh Mohammed Al-Mousawi,
• Mohamed Abd-Elmonem,
• Hesham El-Zorba,
• Afaf Mohamed Abdel Hameed,
• Tahany Mahmoud Mohamed and
• Kamal Usef Sadek

Beilstein J. Org. Chem. 2020, 16, 1706–1712, doi:10.3762/bjoc.16.142

• a multistep synthesis route. A first approach relied on the nucleophilic substitution of chlorine in cyanuric chloride with Grignard reagents, ammonia or amines [25][26], which suffered from the high reactivity of the Grignard reagents that prevents further functionalization. Moreover, this protocol

Azidophosphonium salt-directed chemoselective synthesis of (E)/(Z)-cinnamyl-1H-triazoles and regiospecific access to bromomethylcoumarins from Morita–Baylis–Hillman adducts

• Soundararajan Karthikeyan,
• Radha Krishnan Shobana,
• Kamarajapurathu Raju Subimol,
• J. Helen Ratna Monica and
• Ayyanoth Karthik Krishna Kumar

Beilstein J. Org. Chem. 2020, 16, 1579–1587, doi:10.3762/bjoc.16.130

• ) acetylation, (ii) azidation, and (iii) cycloaddition to produce IV–VIII. In spite of the broad scope and synthetic utility, it is evident that the multistep synthetic methodology is the only existing module for cycloaddition reactions. Our research group is focused on developing one-pot synthetic

• transformations for complex molecules [29][30][31]. Two individual research groups have reported the multistep pathway to access the cinnamyl-1H-1,2,3-triazole derivatives IX from acetates of MBH adducts (Scheme 2) [32][33]. The other preferable moiety for triazole transformations is the allyl halide of MBH

One-step route to tricyclic fused 1,2,3,4-tetrahydroisoquinoline systems via the Castagnoli–Cushman protocol

• Aleksandar Pashev,
• Nikola Burdzhiev and
• Elena Stanoeva

Beilstein J. Org. Chem. 2020, 16, 1456–1464, doi:10.3762/bjoc.16.121

• enhances the treatment by sensitizing cancer cells to anticancer drugs [5]. The presence of such structural pattern has driven the development of various approaches for its obtaining – based either on isolation from naturally occurring sources or through multistep synthetic routes [6]. The pyrrolo[2,1-a

Fluorinated phenylalanines: synthesis and pharmaceutical applications

• Laila F. Awad and
• Mohammed Salah Ayoup

Beilstein J. Org. Chem. 2020, 16, 1022–1050, doi:10.3762/bjoc.16.91

• nitrile 48a with 30% HCl aq/acetic acid, gave the 4-fluorophenylalanine·HCl 49a in a good overall yield (67%) [47] (Scheme 11). 1.4. Hydrolysis of Erlenmeyer’s azalactone A multistep Erlenmeyer azalactone synthesis was reported as an important method for the synthesis of fluorinated α-amino acids 53a–h

• (126). Then, reaction of 127 (1.0 mmol) with 1.5/1.0 equiv of diethylaluminum cyanide (Et2AlCN)/iPrOH at −78 °C in THF gave nitrile 128. Deprotection of the latter, followed by hydrolysis of the nitrile group afforded syn-(2S,3S)-(+)-3-fluorophenylalanine (129) [65] (Scheme 28) . 2.3. Multistep

Combining enyne metathesis with long-established organic transformations: a powerful strategy for the sustainable synthesis of bioactive molecules

• Valerian Dragutan,
• Ileana Dragutan,
• Albert Demonceau and
• Lionel Delaude

Beilstein J. Org. Chem. 2020, 16, 738–755, doi:10.3762/bjoc.16.68

• and technologies [21][22][23][24][25][26][27][28][29][30]. Thus, numerous multistep total syntheses of organic compounds, including bioactive molecules [31][32][33][34][35] and natural products [36][37], have been performed in a highly chemo- and stereoselective manner through metathesis routes [38

Design and synthesis of diazine-based panobinostat analogues for HDAC8 inhibition

• Sivaraman Balasubramaniam,
• Sajith Vijayan,
• Liam V. Goldman,
• Xavier A. May,
• Kyra Dodson,
• Sweta Adhikari,
• Fatima Rivas,
• Davita L. Watkins and
• Shana V. Stoddard

Beilstein J. Org. Chem. 2020, 16, 628–637, doi:10.3762/bjoc.16.59

• inhibition activities comparable to that of panobinostat. Multistep syntheses afforded the visualized targets TOI1, TOI2, TOI3-rev and TOI4 whose biological evaluation confirmed the strength of HDAC8 inhibition with TOI4 displaying the greatest efficacy at varying concentrations. The results of this study

• developing single agent therapeutic hydroxamate derivatives, we began the synthesis of four leading HDAC8 diazine-based HDACis: TOI1, TOI2, TOI3-rev and TOI4 (Figure 1). Herein, we provide a summary of the design process followed by an outline of the multistep synthesis and preliminary biological evaluation

Copper-catalyzed O-alkenylation of phosphonates

• Nuria Vázquez-Galiñanes,
• Mariña Andón-Rodríguez,
• Patricia Gómez-Roibás and
• Martín Fañanás-Mastral

Beilstein J. Org. Chem. 2020, 16, 611–615, doi:10.3762/bjoc.16.56

• counterparts has received less attention. Current methodologies for the synthesis of acyclic mixed enol phosphonates include the Perkow-type reaction between phosphonites and α-halocarbonyl compounds [11], the mercury-catalyzed addition of phosphonic acid monoesters to terminal alkynes [12][13] and multistep

Regioselectively α- and β-alkynylated BODIPY dyes via gold(I)-catalyzed direct C–H functionalization and their photophysical properties

• Takahide Shimada,
• Shigeki Mori,
• Masatoshi Ishida and
• Hiroyuki Furuta

Beilstein J. Org. Chem. 2020, 16, 587–595, doi:10.3762/bjoc.16.53

• ], and borylation [32]), has been in great demand recently rather than the conventional multistep synthesis with nucleophilic substitution/cross-coupling via halogenation of BODIPYs [33] or from the activated precursors [34] via unstable pyrrolic intermediates. In particular, halogenation (e.g

A systematic review on silica-, carbon-, and magnetic materials-supported copper species as efficient heterogeneous nanocatalysts in “click” reactions

• Pezhman Shiri and
• Jasem Aboonajmi

Beilstein J. Org. Chem. 2020, 16, 551–586, doi:10.3762/bjoc.16.52

• loss of catalytic activity. Using a multistep solid-phase procedure, Shantz et al. reported on SBA-15 functionalized with melamine-based dendrons (Scheme 3) [27]. The Cu and Cu/Au nanoparticles were then supported on this new composite to generate a nanocatalyst. The catalytic application of this

Understanding the role of active site residues in CotB2 catalysis using a cluster model

• Keren Raz,
• Ronja Driller,
• Thomas Brück,
• Bernhard Loll and
• Dan T. Major

Beilstein J. Org. Chem. 2020, 16, 50–59, doi:10.3762/bjoc.16.7

• , Dept. of Chemistry, Technical University of Munich (TUM), Lichtenbergstr. 4, 85748 Garching, Germany 10.3762/bjoc.16.7 Abstract Terpene cyclases are responsible for the initial cyclization cascade in the multistep synthesis of a large number of terpenes. CotB2 is a diterpene cyclase from Streptomyces

A green, economical synthesis of β-ketonitriles and trifunctionalized building blocks from esters and lactones

• Daniel P. Pienaar,
• Kamogelo R. Butsi,
• Amanda L. Rousseau and
• Dean Brady

Beilstein J. Org. Chem. 2019, 15, 2930–2935, doi:10.3762/bjoc.15.287

• hydroxy ester 4 followed by reaction with acetonitrile (CH3CN), a multistep approach would be less economical in industry (Scheme 1). Results and Discussion To date, the most economically appealing conditions from an environmentally friendly perspective entail relatively mild base-promoted (potassium tert

Bacterial terpene biosynthesis: challenges and opportunities for pathway engineering

• Eric J. N. Helfrich,
• Geng-Min Lin,
• Christopher A. Voigt and
• Jon Clardy

Beilstein J. Org. Chem. 2019, 15, 2889–2906, doi:10.3762/bjoc.15.283

• significantly (Figure 8) [98]. Despite difficulties in engineering terpene biosynthesis, total synthesis of complex terpenoids does not appear to be a viable alternative. Traditionally, complex terpenes are synthesized from small and cheap chiral terpenes as starting material in (linear) multistep syntheses [99

• their chaperone-like properties [102][103][104]. Unlike the generation of hydrocarbon backbones in nature, even the biomimetic synthetic construction of terpene scaffolds is usually a multistep process [17]. The second phase of a biomimetic synthesis, in analogy to terpene biosynthesis, involves the

Photoreversible stretching of a BAPTA chelator marshalling Ca²⁺-binding in aqueous media

• Aurélien Ducrot,
• Arnaud Tron,
• Robin Bofinger,
• Ingrid Sanz Beguer,
• Jean-Luc Pozzo and
• Nathan D. McClenaghan

Beilstein J. Org. Chem. 2019, 15, 2801–2811, doi:10.3762/bjoc.15.273

• in Scheme 1 and detailed synthetic procedures are given below. Briefly, the synthesis of 1 started with the preparation of a BAPTA core via a multistep route adapting the synthetic route developed by Crossley et al. [35]. 1,4-Hydroquinone was benzylated and subsequently nitrated. This intermediate

A review of asymmetric synthetic organic electrochemistry and electrocatalysis: concepts, applications, recent developments and future directions

• Munmun Ghosh,
• Valmik S. Shinde and
• Magnus Rueping

Beilstein J. Org. Chem. 2019, 15, 2710–2746, doi:10.3762/bjoc.15.264

• pathways for synthetic transformations that are otherwise quite challenging. Not only the environmental advantages with respect to substituting toxic chemical reagents with mass-free electrons and minimizing the reagent waste generated, but also in terms of shortening of tedious multistep reaction

Unexpected one-pot formation of the 1H-6a,8a-epiminotricyclopenta[a,c,e][8]annulene system from cyclopentanone, ammonia and dimethyl fumarate. Synthesis of highly strained polycyclic nitroxide and EPR study

• Sergey A. Dobrynin,
• Igor A. Kirilyuk,
• Yuri V. Gatilov,
• Andrey A. Kuzhelev,
• Olesya A. Krumkacheva,
• Matvey V. Fedin,
• Michael K. Bowman and
• Elena G. Bagryanskaya

Beilstein J. Org. Chem. 2019, 15, 2664–2670, doi:10.3762/bjoc.15.259

• observed in a one-pot synthesis from cyclopentanone, dimethyl fumarate and ammonium acetate. This multistep reaction includes 1,3-dipolar cycloaddition of dimethyl fumarate to the cyclic azomethine ylide formed in situ from cyclopentanone and ammonia. The polycyclic amine product was easily converted into

• nitroxide [4]. Here we report the unexpected formation of a highly strained polycyclic amine from cyclopentanone, dimethyl fumarate and ammonium acetate. This multistep reaction obviously includes the 1,3-dipolar cycloaddition of dimethyl fumarate with cyclic azomethine ylide formed in situ from

Plasma membrane imaging with a fluorescent benzothiadiazole derivative

• Pedro H. P. R. Carvalho,
• Jose R. Correa,
• Karen L. R. Paiva,
• Daniel F. S. Machado,
• Jackson D. Scholten and
• Brenno A. D. Neto

Beilstein J. Org. Chem. 2019, 15, 2644–2654, doi:10.3762/bjoc.15.257

• design and synthesis of small organic fluorescence imaging probes capable of selectively stain plasma membranes has been proven, however, often as a challenging task. The development of small organic probes, in general, has been hindered by the requirement of multistep syntheses to obtain the fluorophore

Safe and highly efficient adaptation of potentially explosive azide chemistry involved in the synthesis of Tamiflu using continuous-flow technology

• Cloudius R. Sagandira and
• Paul Watts

Beilstein J. Org. Chem. 2019, 15, 2577–2589, doi:10.3762/bjoc.15.251

• %, respectively (Figure 18). NaN3 is the azidating agent of our choice on efficiency, affordability and availability viewpoint. TBAA can be used as azidating agent instead of NaN3 when anhydrous conditions are required which are useful in multistep syntheses. Azide 7 was successfully synthesised from acetamide 6

A toolbox of molecular photoswitches to modulate the CXCR3 chemokine receptor with light

• Xavier Gómez-Santacana,
• Sabrina M. de Munnik,
• Tamara A. M. Mocking,
• Niels J. Hauwert,
• Shanliang Sun,
• Prashanna Vijayachandran,
• Iwan J. P. de Esch,
• Henry F. Vischer,
• Maikel Wijtmans and
• Rob Leurs

Beilstein J. Org. Chem. 2019, 15, 2509–2523, doi:10.3762/bjoc.15.244

• VUF16216, a compound we have previously communicated as a small-molecule efficacy photoswitch for the peptidergic chemokine GPCR CXCR3. A series of photoswitchable azobenzene ligands was prepared through various synthetic strategies and multistep syntheses. Photochemical and pharmacological properties were

Fluorescent phosphorus dendrimers excited by two photons: synthesis, two-photon absorption properties and biological uses

• Anne-Marie Caminade,
• Artem Zibarov,
• Eduardo Cueto Diaz,
• Aurélien Hameau,
• Maxime Klausen,
• Kathleen Moineau-Chane Ching,
• Jean-Pierre Majoral,
• Jean-Baptiste Verlhac,
• Olivier Mongin and
• Mireille Blanchard-Desce

Beilstein J. Org. Chem. 2019, 15, 2287–2303, doi:10.3762/bjoc.15.221

• benzaldehyde on the other side. A detailed synthetic process for one of these bifunctionalized fluorophores is illustrated in Scheme 6. It is a multistep process, as 12 steps are needed to get this highly sophisticated fluorophore [58]. In general, the fluorophores are incorporated at the level of the first

Synthesis and properties of sulfur-functionalized triarylmethylium, acridinium and triangulenium dyes

• Marco Santella,
• Eduardo Della Pia,
• Jakob Kryger Sørensen and
• Bo W. Laursen

Beilstein J. Org. Chem. 2019, 15, 2133–2141, doi:10.3762/bjoc.15.210

• even a little lower [41], and does thus not slow down the multistep SNAr reactions. The new ortho-methoxytriarylcarbenium ions with one, two and three para-SEt groups (1–3) are potential precursors for a wide variety of new triangulenium, xanthenium, and acridinium dyes. To elucidate some of these

An overview of the cycloaddition chemistry of fulvenes and emerging applications

• Ellen Swan,
• Kirsten Platts and
• Anton Blencowe

Beilstein J. Org. Chem. 2019, 15, 2113–2132, doi:10.3762/bjoc.15.209

• ][64][67]. The synthesis of the listed organic molecules (Table 3) is generally successful, with high yields in almost all cases. However, some of these synthetic pathways are multistep [124], hence require optimisation for viability and large-scale production. Similarly, pentafulvenes have been used

• as key reactants for the synthesis of natural products and their skeletons (Table 3). The complexity of these molecules requires extensive multistep pathways (ranging from 5–12 steps [127][187]), decreasing overall yields, and thus requiring further optimisation for commercial production. Narayan et

• (3b’ and 6b’) and anti-aromatic (4a’ and 5a’) ring currents. Reaction of 6,6-dimethylpentafulvene with singlet state oxygen to form an enol lactone via the multistep rearrangement proposed by Harada et al. (supporting information was not provided) [51]. Photosensitized oxygenation of 8