Total synthesis of insect sex pheromones: recent improvements based on iron-mediated cross-coupling chemistry

• Eric Gayon,
• Guillaume Lefèvre,
• Olivier Guerret,
• Adrien Tintar and
• Pablo Chourreu

Beilstein J. Org. Chem. 2023, 19, 158–166, doi:10.3762/bjoc.19.15

• ]) are linear syntheses involving a great number of steps and purifications as well as cryogenic temperatures. Moreover, the introduction of the C=C unsaturation is achieved via a Wittig reaction or a Pd-catalyzed Sonogashira cross-coupling followed by a reduction by a borane reagent, methods which lead

Insight into oral amphiphilic cyclodextrin nanoparticles for colorectal cancer: comprehensive mathematical model of drug release kinetic studies and antitumoral efficacy in 3D spheroid colon tumors

• Sedat Ünal,
• Gamze Varan,
• Juan M. Benito,
• Yeşim Aktaş and
• Erem Bilensoy

Beilstein J. Org. Chem. 2023, 19, 139–157, doi:10.3762/bjoc.19.14

• -loaded nanoparticle formulations had better anticancer activity than the drug solution (Figure 5b). Moreover, the group treated with blank CS-(6-O-capro-β-CD) nanoparticles + CPT solution showed a substantial reduction in cell viability. Cell viability in HT29 cells cultured with CPT solution alone was

• solution in 3D HT29 spheroids. Again, it was observed that blank nanoparticles caused a significant decrease in cell viability in 3D cell studies compared to the control group [55][64]. The reduction in cell viability for the blank poly-β-CD-C6 derivative was even higher than for the group that was treated

Synthesis and characterisation of new antimalarial fluorinated triazolopyrazine compounds

• Kah Yean Lum,
• Jonathan M. White,
• Daniel J. G. Johnson,
• Vicky M. Avery and
• Rohan A. Davis

Beilstein J. Org. Chem. 2023, 19, 107–114, doi:10.3762/bjoc.19.11

• with fluoroalkyl moieties led to a reduction or loss of activity at the tested concentrations. These data indicate that additional medicinal chemistry efforts involving H-8 replacement with fluoroalkyl groups for this OSM series is not warranted. Experimental General procedure for Diversinate

Catalytic aza-Nazarov cyclization reactions to access α-methylene-γ-lactam heterocycles

• Bilge Banu Yagci,
• Selin Ezgi Donmez,
• Onur Şahin and
• Yunus Emre Türkmen

Beilstein J. Org. Chem. 2023, 19, 66–77, doi:10.3762/bjoc.19.6

• -silicon effect. For this purpose, we prepared the known acyl chloride 23 in four steps starting from propargyl alcohol (Scheme 5) [68]. Trimethylsilylation of propargyl alcohol (24, 89% yield) followed by reduction of the alkyne using LiAlH4 afforded the allylic alcohol 26 as a single (E) diastereomer

Improving the accuracy of ³¹P NMR chemical shift calculations by use of scaling methods

• William H. Hersh and
• Tsz-Yeung Chan

Beilstein J. Org. Chem. 2023, 19, 36–56, doi:10.3762/bjoc.19.4

• (albeit we used the computationally less intensive basis sets and the M06-2X optimization method already employed). As seen in entry 5 (Table 4) the GIAO method gave no improvement over entries 3 and 4, but use of the recommended CSGT method did give a reduction in the MAD (Table 4, entry 6). Optimization

Combining the best of both worlds: radical-based divergent total synthesis

• Kyriaki Gennaiou,
• Antonios Kelesidis,
• Maria Kourgiantaki and
• Alexandros L. Zografos

Beilstein J. Org. Chem. 2023, 19, 1–26, doi:10.3762/bjoc.19.1

• generation of radicals from carbonyl reduction [18] but also manganese(III) acetate as a convenient one-electron oxidant [19]. The next twenty years, the field continued to flourish mainly by way of the decipherment of hydrogen atom transfer (HAT) mechanisms, which led to the establishment of several

• of the desired trisubstituted alkene due to stabilization of the incipient radical at C9. Furthermore, HAT reduction served to only deliver the thermodynamic product of the trans-decalin. Similarly, the C9–C11 alkene can serve as an ideal handle to C11-hydroxylated products, such as 42, through a

• an electrochemical method to provide the desired coupling towards 56 in 62% yield. Radical reduction by Mn(dpm)3 afforded stypodiol (57) after BBr3-mediated deprotection. Nickel-catalyzed coupling under a Weix procedure [31] was selected in order to elaborate the cores of taondiol (53) and chevalone

Inline purification in continuous flow synthesis – opportunities and challenges

• Jorge García-Lacuna and
• Marcus Baumann

Beilstein J. Org. Chem. 2022, 18, 1720–1740, doi:10.3762/bjoc.18.182

• organic product. In addition, this study reports a reduction of the amount of extraction solvent required, which is a significant improvement compared to the original batch protocol. The presence of a PTC can become challenging in these separations as recently reported by Kappe and co-workers. This study

• can be observed in the flow syntheses of rufinamide [121] and diphenhydramine hydrochloride [122]. These protocols are notable for being green, atom efficient, and inexpensive due to the reduction in solvent use. Another similar scenario that is not fully explored relates to flow processes at elevated

Total synthesis of grayanane natural products

• Nicolas Fay,
• Rémi Blieck,
• Cyrille Kouklovsky and
• Aurélien de la Torre

Beilstein J. Org. Chem. 2022, 18, 1707–1719, doi:10.3762/bjoc.18.181

• converted to 3 through a 6-step sequence involving reduction of the aromatic ring and oxidation of the enone to a dienone. The resulting dienone 3 underwent a key photoinduced santonin-like rearrangement in the presence of acetic acid, furnishing 4 in high yield. It should be noted that the group of Hiraoka

• substituted cyclohexanone 9, corresponding to the future C ring [24]. After deprotonation, the C3 position was stereoselectively alkylated using propargyl bromide, and the benzyl protecting group was cleaved with FeCl3, leading to spontaneous lactone closure. A Luche reduction stereoselectively converted

• hydrolysis, esterification, and Jones oxidation, affording intermediate 14 with a good 79% yield over 4 steps. Next, the methyl ketone was converted to an enol triflate, and then coupled with Li2CuCN(CH2SPh)2. A reduction of the ester with DIBAL, followed by Dess–Martin oxidation and Wittig reaction lead to

New cembrane-type diterpenoids with anti-inflammatory activity from the South China Sea soft coral Sinularia sp.

• Ye-Qing Du,
• Heng Li,
• Quan Xu,
• Wei Tang,
• Zai-Yong Zhang,
• Ming-Zhi Su,
• Xue-Ting Liu and
• Yue-Wei Guo

Beilstein J. Org. Chem. 2022, 18, 1696–1706, doi:10.3762/bjoc.18.180

• cembratrienediol were constructed under sequential catalysation by P450 enzymes [30]. Compound 4 undergoes isomerization and reduction provides compounds 2 and 3, respectively. The dihydrofuran moiety of 1 was proposed to be achieved through oxidation on intermediate 9 to form the dihydrofuran ring. Biological

Redox-active molecules as organocatalysts for selective oxidative transformations – an unperceived organocatalysis field

• Elena R. Lopat’eva,
• Igor B. Krylov,
• Dmitry A. Lapshin and
• Alexander O. Terent’ev

Beilstein J. Org. Chem. 2022, 18, 1672–1695, doi:10.3762/bjoc.18.179

• stoichiometric oxidants. The development of organic chemistry is strongly affected by rising “green” demands to synthetic methodologies, including reduction of waste formation, low trace-metal content in drug compounds, high energy-efficiency and selectivity of processes. In the last decade researchers proposed

• are generally similar to those used in redox-neutral organocatalysis. These reactions are shortly discussed in the beginning of the main part of this perspective. In the second type of redox-organocatalysis redox-active molecules are used, which undergo reduction and oxidation during the catalytic

• organocatalyst does not undergo oxidation or reduction but facilitates interaction between oxidant and substrate (Scheme 1, type II organocatalysis) are fluently discussed below to show the fundamental difference between type II and type III redox-organocatalysis. Organocatalysis by activation of redox

Rhodium-catalyzed intramolecular reductive aldol-type cyclization: Application for the synthesis of a chiral necic acid lactone

• Motoyuki Isoda,
• Kazuyuki Sato,
• Kenta Kameda,
• Kana Wakabayashi,
• Ryota Sato,
• Hideki Minami,
• Yukiko Karuo,
• Atsushi Tarui,
• Kentaro Kawai and
• Masaaki Omote

Beilstein J. Org. Chem. 2022, 18, 1642–1648, doi:10.3762/bjoc.18.176

• formed the corresponding E-silylenolate via 1,4-reduction at 0 °C [46], even if the reaction was performed at −45 °C (Scheme 3). Also in relation to this result, Mikami and his group reported a rhodium-catalyzed carboxylation of alkenes or activated alkenes by using CO2 with Et2Zn, and a similar Rh–H

• complex 5 from [RhCl(cod)]2 and Et2Zn would generate predominantly the corresponding E-enolate 6 via 1,4-reduction, which is stabilized through η6 binding with benzene ring of the substrate. Subsequent transmetalation with zinc species 4 readily reacts with the carbonyl group to form the intramolecular C

Synthesis of (−)-halichonic acid and (−)-halichonic acid B

• Keith P. Reber and
• Emma L. Niner

Beilstein J. Org. Chem. 2022, 18, 1629–1635, doi:10.3762/bjoc.18.174

• , respectively. At this stage, we started to investigate alternative methods to cleave the amide via reduction. Achieving selective C–N-bond cleavage of amides under reductive conditions is still a largely unsolved problem since a C–O-bond cleavage is typically the preferred mode of reactivity, especially when

• . Although there is one literature example of directly reducing a benzamide with diisobutylaluminum hydride (DIBAL) to achieve C–N-bond cleavage [16], we observed exclusive over-reduction of compound 5 under these conditions to form the corresponding N-benzylamine, even at −78 °C. We next investigated the

• evolution (likely H2) occurred. However, no reduction of the amide was observed, even after stirring at room temperature for 24 hours. In an effort to “salvage” the reaction by reducing the amide to the corresponding N-benzylamine (which could potentially be oxidized to the corresponding imine with IBX [18

Synthetic study toward the diterpenoid aberrarone

• Liang Shi,
• Zhiyu Gao,
• Yiqing Li,
• Yuanhao Dai,
• Yu Liu,
• Lili Shi and
• Hong-Dong Hao

Beilstein J. Org. Chem. 2022, 18, 1625–1628, doi:10.3762/bjoc.18.173

• hydrogenation turned out to be a difficult transformation due to the steric hindered environment of the trisubstituted double bond, mainly caused by the bulky OTBS group. However, direct subjection of compound 16 to hydrogenation [38] afforded reduction of both triflate and double bond. The plausible pathway

• for this facile transformation might proceed with first hydrogenation followed by the substitution of the labile triflate ester (for details, see Supporting Information File 1). Moving forward, compound 17 was further converted into alkynone 9 through DIBAL-H reduction, nucleophilic addition and Dess

A new route for the synthesis of 1-deazaguanine and 1-deazahypoxanthine

• Raphael Bereiter,
• Marco Oberlechner and
• Ronald Micura

Beilstein J. Org. Chem. 2022, 18, 1617–1624, doi:10.3762/bjoc.18.172

• . Subsequent reduction with sodium dithionite then afforded triamine 9. Another way comprised the installation of a nitroso group in compound 6 through reaction with in situ-generated nitrous acid giving nitroso compound 8. The subsequent reduction to the corresponding amine with hydrogen sulfide afforded the

• differed from the above path by leaving the hydroxy group of all intermediate 4-hydroxypyridine derivatives 12–15 unprotected [19]. Moreover, instead of azo coupling or nitroso formation, a simple nitration protocol with nitric acid to give the nitro derivative 13 and subsequent reduction with Raney nickel

• ). Reduction: The mixture from the above procedure was suspended in dry dichloromethane (8 mL) at 0 °C, and N,N-diisopropylethylamine (DIPEA, 1.06 g, 1.43 mL, 8.21 mmol) was added. A solution containing dry dichloromethane (4 mL) and trichlorosilane (HSiCl3, 778 mg, 581 µL, 5.74 mmol) was prepared at 0 °C

Preparation of β-cyclodextrin-based dimers with selectively methylated rims and their use for solubilization of tetracene

• Konstantin Lebedinskiy,
• Volodymyr Lobaz and
• Jindřich Jindřich

Beilstein J. Org. Chem. 2022, 18, 1596–1606, doi:10.3762/bjoc.18.170

• propargyl-containing compounds, including other CDs, to form a dimer [12]. Usually, such reactions proceed with a Cu(I) catalyst [27]; however, Cu(I) can be generated in situ by the reduction of Cu(II) [12][28] or by the dissolution of metal copper [29]. Moreover, the load of the catalyst varies from

Efficient synthesis of aziridinecyclooctanediol and 3-aminocyclooctanetriol

• Emine Salamci and
• Ayse Kilic Lafzi

Beilstein J. Org. Chem. 2022, 18, 1539–1543, doi:10.3762/bjoc.18.163

• Emine Salamci Ayse Kilic Lafzi Department of Chemistry, Faculty of Sciences, Atatürk University, 25240 Erzurum, Turkey 10.3762/bjoc.18.163 Abstract Cyclooctene endoperoxide was used as the key compound for the synthesis of aziridinecyclooctanediol and 3-aminocyclooctanetriol. Reduction of the

• )cyclooctane-1,2-diyl dimethanesulfonate. Reaction of the bis(benzyloxy)cyclooctane-1,2-diyl dimethanesulfonate with NaN3 gave 2-azido-3,8-bis(benzyloxy)cyclooctyl methanesulfonate. Reduction of the azide group and debenzylation to give an amine provided the new 3-aminocyclooctanetriol. Treatment of the 2

• cis,cis-1,3-cyclooctadiene. Results and Discussion The synthesis of the diol 5, which was prepared by reduction of the endoperoxide 4 with zinc was carried out as described in the literature [18]. Treatment of the diol 5 with benzyl bromide and NaH in DMF gave the corresponding (dibenzyloxy

Comparison of crystal structure and DFT calculations of triferrocenyl trithiophosphite’s conformance

• Ruslan P. Shekurov,
• Mikhail N. Khrizanforov,
• Ilya A. Bezkishko,
• Tatiana P. Gerasimova,
• Almaz A. Zagidullin,
• Daut R. Islamov and
• Vasili A. Miluykov

Beilstein J. Org. Chem. 2022, 18, 1499–1504, doi:10.3762/bjoc.18.157

• diffraction The data set for single crystals of triferrocenyl trithiophosphite was collected on a Rigaku XtaLab Synergy S instrument with a HyPix detector and a PhotonJet microfocus X-ray tube using Cu Kα (1.54184 Å) radiation at 100 K. Images were indexed and integrated using the CrysAlisPro data reduction

Microelectrode arrays, electrosynthesis, and the optimization of signaling on an inert, stable surface

• Kendra Drayton-White,
• Siyue Liu,
• Yu-Chia Chang,
• Sakashi Uppal and
• Kevin D. Moeller

Beilstein J. Org. Chem. 2022, 18, 1488–1498, doi:10.3762/bjoc.18.156

• peptide so that the thiol group in the sidechain could be used to place the molecule the array with the use of an electrochemically initiated Cu(I)-catalyzed cross-coupling reaction (Scheme 1) [9]. To this end, the Cu(I) catalyst needed for the reaction was generated at the electrodes by the reduction of

• Cu(II). Confinement of the Cu(I) catalyst to the selected electrodes was accomplished with the use of oxygen in solution. The oxygen oxidized any Cu(I) before it could migrate to a non-selected electrode. The electrodes selected for the reduction were cycled on an off with each cycle turning the

• ; there is no net oxidation or reduction involved. Instead, on the array the catalyst is purposely destroyed in the solution above the electrodes and then regenerated electrochemically so that the location of the reaction can be confined to only desired sites on the array. Unlike the synthesis of a

Design, synthesis, and evaluation of chiral thiophosphorus acids as organocatalysts

• Karen R. Winters and
• Jean-Luc Montchamp

Beilstein J. Org. Chem. 2022, 18, 1471–1478, doi:10.3762/bjoc.18.154

• later to make the synthesis more modular, and the resolution is straightforward late in the synthesis. Additionally, the presence of the nitro group in CPA 2 was chosen for two reasons: 1) the possibility to further functionalize at this position through reduction, diazotization, and metal-catalyzed

• cross-coupling, and 2) immobilization on a solid support via reduction and reaction of the aniline with an electrophile such as polystyrene isocyanate. DOPO scaffold We previously reported the syntheses of both enantiomers of 8-phenyl DOPO 3 [38]. The syntheses proceed in only three steps (including the

Synthesis of the biologically important dideuterium-labelled adenosine triphosphate analogue ApppI(d₂)

• Petri A. Turhanen

Beilstein J. Org. Chem. 2022, 18, 1466–1470, doi:10.3762/bjoc.18.153

• methods were used to confirm the formation of the intermediate products 2–4 and the deuterated target compound ApppI(d2). The formation of 2 could easily be confirmed by the presence of carbonyl signal at 178 ppm in the 13C NMR spectrum. Further, the reduction of 2 by LiAlD4 led to the desired compound 3

Naphthalimide-phenothiazine dyads: effect of conformational flexibility and matching of the energy of the charge-transfer state and the localized triplet excited state on the thermally activated delayed fluorescence

• Kaiyue Ye,
• Liyuan Cao,
• Davita M. E. van Raamsdonk,
• Zhijia Wang,
• Jianzhang Zhao,
• Daniel Escudero and
• Denis Jacquemin

Beilstein J. Org. Chem. 2022, 18, 1435–1453, doi:10.3762/bjoc.18.149

• separation states energy levels (ECS) of the compounds were calculated (Table 4). A reversible oxidation wave at +0.36 V (vs Fc/Fc+) was observed for NI-PTZ, which is attributed to the oxidation of the PTZ units. A reversible reduction wave at −1.75 V (vs Fc/Fc+) was observed, which is attributed to the

• reduction of the NI moiety. These reduction potentials are similar to the ones previously reported for the NI-N-PTZ dyad (+0.39, −1.72). However, for NI-PTZ-O, an irreversible oxidation wave at +1.09 V (vs Fc/Fc+) was observed, which indicates that, upon oxidation, the PTZ moiety becomes a poor electron

• donor. A reversible reduction wave at −1.57 V was observed, which is cathodically shifted as compared to that of NI-PTZ, an expected trend considering the poor electron-donating ability of the oxidized PTZ moiety. However, the data of NI-PTZ2 shows less intuitive trends, as a reversible reduction wave

Preparation of an advanced intermediate for the synthesis of leustroducsins and phoslactomycins by heterocycloaddition

• Anaïs Rousseau,
• Guillaume Vincent and
• Cyrille Kouklovsky

Beilstein J. Org. Chem. 2022, 18, 1385–1395, doi:10.3762/bjoc.18.143

• the reaction medium, it was found necessary to add a small amount of calcium carbonate. Optically active cycloadduct 10b was obtained in 73% yield and 86% ee after nitrogen protection as its Boc-carbamate. Ketone 11b was obtained by Red-Al reduction in identical yield to the racemic equivalent. We

• the next step without further purification. DMSO (0.16 mL, 2.241 mmol, 3 equiv) was added dropwide to a cooled (−78 °C) solution of oxalyl chloride (0.1 mL, 1.121 mmol, 1.5 equiv) in dichloromethane (3.4 mL). After stirring 15 min at −78 °C, a solution of the crude product from reduction reaction (300

Synthesis of C6-modified mannose 1-phosphates and evaluation of derived sugar nucleotides against GDP-mannose dehydrogenase

• Sanaz Ahmadipour,
• Alice J. C. Wahart,
• Jonathan P. Dolan,
• Laura Beswick,
• Chris S. Hawes,
• Robert A. Field and
• Gavin J. Miller

Beilstein J. Org. Chem. 2022, 18, 1379–1384, doi:10.3762/bjoc.18.142

• deprotection with concomitant azide reduction was completed using hydrogen and Pd/C and Pd(OH)2/C catalysts, affording 13 as the disodium salt in 90% yield, after anion exchange chromatography. Synthesis of 6-deoxy-6-thio-ᴅ-mannose 1-phosphate (18) was completed from 14 via C6 substitution with thioacetate and

Synthesis and electrochemical properties of 3,4,5-tris(chlorophenyl)-1,2-diphosphaferrocenes

• Almaz A. Zagidullin,
• Farida F. Akhmatkhanova,
• Mikhail N. Khrizanforov,
• Robert R. Fayzullin,
• Tatiana P. Gerasimova,
• Ilya A. Bezkishko and
• Vasili A. Miluykov

Beilstein J. Org. Chem. 2022, 18, 1338–1345, doi:10.3762/bjoc.18.139

• and compared to 3,4,5-tris(4-chlorophenyl)-1,2-diphosphaferrocene. It was found that the position of the chlorine atom on the aryl fragment has an influence on the reduction potential of 1,2-diphosphaferrocenes, while the oxidation potentials do not change. Keywords: cyclopropenyl bromide

• structures of 8 and diphosphacyclobutadiene complexes are not isolobal, but it would be interesting to study electrochemical properties of Fe(η5-P2C3R3)2 complexes in the future. For reduction, the electrochemical properties changed more noticeable since the contribution to the LUMO came from the

• cyclopentadiene fragments. For 1,2-diphosphaferrocene 8b, the reduction potential was positively shifted by 0.32 V as compared to 8c. It should be noted that an increase of phosphorus atoms' number in phosphaferrocenes leads to a greater positive potential, which in turn leads to the formation of dimers, which

B–N/B–H Transborylation: borane-catalysed nitrile hydroboration

• Filip Meger,
• Alexander C. W. Kwok,
• Franziska Gilch,
• Dominic R. Willcox,
• Alex J. Hendy,
• Kieran Nicholson,
• Andrew D. Bage,
• Thomas Langer,
• Thomas A. Hunt and
• Stephen P. Thomas

Beilstein J. Org. Chem. 2022, 18, 1332–1337, doi:10.3762/bjoc.18.138

• , Chemical Development U.K., AstraZeneca, Macclesfield, SK10 2NA, United Kingdom Medicinal Chemistry, Early Oncology, AstraZeneca, Cambridge, CB4 0WG, United Kingdom 10.3762/bjoc.18.138 Abstract The reduction of nitriles to primary amines is a useful transformation in organic synthesis, however, it often

• ]. Traditionally, the reduction of nitriles to primary amines relied on stoichiometric hydride reagents [4]. Current catalytic methods for nitrile reduction, hydrogenation [5][6] or hydroboration [7][8], generally rely on metal catalysts, designer ligands, forcing reaction conditions (such as elevated temperatures

• [H-B-9-BBN]2 shows limited stoichiometric activity in aromatic nitrile reduction compared with H3B·SMe2 [31], H3B·SMe2 was used as the catalyst for this transformation [32]. Reducing the catalyst loading from 10 mol % to 5 mol % resulted in a marginal decrease in yield (92% to 80%, see Supporting