N-Sulfenylsuccinimide/phthalimide: an alternative sulfenylating reagent in organic transformations

• Fatemeh Doraghi,
• Seyedeh Pegah Aledavoud,
• Mehdi Ghanbarlou,
• Bagher Larijani and
• Mohammad Mahdavi

Beilstein J. Org. Chem. 2023, 19, 1471–1502, doi:10.3762/bjoc.19.106

• attack of the aromatic ring on the thiiranium ion moiety furnished products 137 and reproduced the selenide catalyst (Scheme 59). Zhao and co-workers found that N-thiosuccinimides are also suitable promoters for the enantioselective hydrothiolation of alkenes at low temperatures (Scheme 60) [91]. The

Total synthesis of grayanane natural products

• Nicolas Fay,
• Rémi Blieck,
• Cyrille Kouklovsky and
• Aurélien de la Torre

Beilstein J. Org. Chem. 2022, 18, 1707–1719, doi:10.3762/bjoc.18.181

• opening of the epoxide (15%). From 41 having the correct tetracyclic skeleton, a transient protection followed by Petasis olefination, deprotection, selenide-mediated α,β-dehydrogenation and Mukaiyama oxidation afforded an advanced intermediate 42 bearing most of the target’s functionalities. A sequence

Supramolecular approaches to mediate chemical reactivity

• Pablo Ballester,
• Qi-Qiang Wang and
• Carmine Gaeta

Beilstein J. Org. Chem. 2022, 18, 1463–1465, doi:10.3762/bjoc.18.152

• of novel supramolecular catalysts. In their contribution Wang and co-workers [17] reported an interesting example of chalcogen bonding catalysis approach for the synthesis of calix[4]pyrrole macrocycles. The Se···O=C chalcogen bonding interactions between a selenide-based catalyst and the carbonyl

Synthesis of novel alkynyl imidazopyridinyl selenides: copper-catalyzed tandem selenation of selenium with 2-arylimidazo[1,2-a]pyridines and terminal alkynes

• Mio Matsumura,
• Kaho Tsukada,
• Kiwa Sugimoto,
• Yuki Murata and
• Shuji Yasuike

Beilstein J. Org. Chem. 2022, 18, 863–871, doi:10.3762/bjoc.18.87

• inexpensive and easy to handle Se powder as the Se source. The reaction proceeded with terminal alkynes having various substitutions, such as aryl, vinyl, and alkyl groups. The obtained alkynyl imidazopyridinyl selenide was found to undergo nucleophilic substitution reaction on Se atom using organolithium

• reagents and 1,3-dipolar azide–alkyne cycloaddition based on the alkyne moiety. Keywords: alkynyl imidazopyridinyl selenide; copper catalyst; imidazo[1,2-a]pyridine; selenium; tandem reaction; terminal alkyne; Introduction Imidazo[1,2-a]pyridines are important heterocycles that serve as key functional

• the last two decades owing to their applicability in biological and pharmaceutical fields [9][10]. For example, butyl (2-phenylethynyl)selenide (I, Figure 1) has an antinociceptive effect on the formalin test in mice [11], selanyl acetylenic retinoids II show an RAR agonist activity [12], and bis

A Se···O bonding catalysis approach to the synthesis of calix[4]pyrroles

• Qingzhe Tong,
• Zhiguo Zhao and
• Yao Wang

Beilstein J. Org. Chem. 2022, 18, 325–330, doi:10.3762/bjoc.18.36

• ]pyrrole derivatives. The Se···O bonding interactions between selenide catalysts and ketones gave rise to the catalytic activity in the condensation reactions between pyrrole and ketones, leading to the generation of calix[4]pyrrole derivatives in moderate to high yields. This chalcogen bonding catalysis

• phosphonium selenide catalysts which showed catalytic activity in assembly reactions [41], Michael addition reactions [41], Rauhut–Currier reactions [42], cyanosilylation reactions [43], and cycloaddition of vinylindoles through chalcogen–π bonding catalysis [44]. Our previous works demonstrated that Se···O

• between ketones and pyrrole might take place to give calix[4]pyrrole derivatives under catalysis of a selenide catalyst. In the absence of a catalyst, no reaction took place. Indeed, even in presence of 5 mol % representative catalyst Ch1 [44], the condensation reaction between acetone and pyrrole worked

Catalyzed and uncatalyzed procedures for the syntheses of isomeric covalent multi-indolyl hetero non-metallides: an account

• Ranadeep Talukdar

Beilstein J. Org. Chem. 2021, 17, 2102–2122, doi:10.3762/bjoc.17.137

• catalytic and uncatalytic synthetic strategies adopted for the synthesis of the non-ionic (non-metallic) versions of these important molecules till date. Keywords: bisindole; heteroatom; indole; selenide; sulfide; Introduction Indole can be considered as a “prodigy” in the family of nitrogen-based

A recent overview on the synthesis of 1,4,5-trisubstituted 1,2,3-triazoles

• Pezhman Shiri,
• Ali Mohammad Amani and
• Thomas Mayer-Gall

Beilstein J. Org. Chem. 2021, 17, 1600–1628, doi:10.3762/bjoc.17.114

• aryl selenide anion to the antimony atom takes place to give 5-selanyltriazole 85 and Ph2Sb–SeAr. Ph2Sb–SeAr is hydrolyzed in aqueous medium to give selenol 90 and Ph2SbOH. Selenol 90 is oxidized in air and transformed into diselenide 84. Therefore, only 0.5 equiv of diaryl diselenide were necessary

Recent progress in the synthesis of homotropane alkaloids adaline, euphococcinine and N-methyleuphococcinine

• Dimas J. P. Lima,
• Antonio E. G. Santana,
• Michael A. Birkett and
• Ricardo S. Porto

Beilstein J. Org. Chem. 2021, 17, 28–41, doi:10.3762/bjoc.17.4

• (−)-79a and (−)-79b, which were oxidized to enone (−)-80. The enone (−)-80 was subjected to ring-closing metathesis with Grubbs second-generation catalyst resulting in cyclic enone (−)-81 in 74% yield. (−)-81 was treated with phenylselenol to generate selenide 82 in high yield. The ozonolysis of 82 was

Synthesis and anticancer activity of bis(2-arylimidazo[1,2-a]pyridin-3-yl) selenides and diselenides: the copper-catalyzed tandem C–H selenation of 2-arylimidazo[1,2-a]pyridine with selenium

• Mio Matsumura,
• Tsutomu Takahashi,
• Hikari Yamauchi,
• Shunsuke Sakuma,
• Yukako Hayashi,
• Tadashi Hyodo,
• Tohru Obata,
• Kentaro Yamaguchi,
• Yasuyuki Fujiwara and
• Shuji Yasuike

Beilstein J. Org. Chem. 2020, 16, 1075–1083, doi:10.3762/bjoc.16.94

• ]pyridin-3-yl] diselenide showed an excellent anticancer activity and low cytotoxicity toward noncancer cells, suggesting that this diselenide is a potential lead compound for anticancer therapy. Keywords: anticancer activity; copper catalyst; diselenide; imidazopyridine; selenide; selenium; Introduction

• synthesis of a diselenide and a selenide bearing two imidazo[1,2-a]pyridine rings, such as bis(imidazo[1,2-a]pyridin-3-yl) selenide and the corresponding diselenides, have only been reported by Paulder et al. [33]; however, the reported reaction was somewhat disadvantageous since it used SeO2 (which is an

• investigate the influence of the amount of Se powder used, 1a was reacted with 0.75 and 0.5 equiv of Se powder under the previously reported optimal experimental conditions. The reaction using 0.75 equiv of Se powder gave the diselenide 2a in 40% yield and the selenide 3a in 58% yield (Table 1, entry 2

Regio- and stereoselective synthesis of new ensembles of diversely functionalized 1,3-thiaselenol-2-ylmethyl selenides by a double rearrangement reaction

• Svetlana V. Amosova,
• Andrey A. Filippov,
• Nataliya A. Makhaeva,
• Alexander I. Albanov and
• Vladimir A. Potapov

Beilstein J. Org. Chem. 2020, 16, 515–523, doi:10.3762/bjoc.16.47

• a regio- and stereoselective manner affording 1,3-thiaselenol-2-ylmethyl vinyl selenides in high yields predominantly with Z-configuration. Not a single representative of the 1,3-thiaselenol-2-ylmethyl selenide scaffold has been previously described in the literature. Keywords: 2-(bromomethyl)-1,3

• of bis(trimethylsilyl)selenide [23]. The methodology based on bis(trimethylsilyl)selenide was also successfully applied to the synthesis of functionalized asymmetric alkyl- and vinyl selenides, including cyclic disubstituted 1,3-thiaselenolane and trisubstituted thiaselenane [26][27]. Vinyl selenides

• organic halides, regio- and stereoselective nucleophilic addition to activated acetylenes and oxidation. Noteworthy, no other example for the synthesis of 1,3-thiaselenol-2-ylmethyl selenide derivatives was hitherto described. A high selectivity, mild reaction conditions and very simple work-up procedures

Chiral terpene auxiliaries V: Synthesis of new chiral γ-hydroxyphosphine oxides derived from α-pinene

• Anna Kmieciak and
• Marek P. Krzemiński

Beilstein J. Org. Chem. 2019, 15, 2493–2499, doi:10.3762/bjoc.15.242

• selenium dioxide in methanol [28]. The obtained phenyl selenide 14 was oxidized with hydrogen peroxide in the presence of pyridine to selenoxide, which readily undergoes intramolecular syn-elimination to produce α,β-unsaturated (+)-apoverbenone (15) [28][29]. In the next step, Luche reduction of 15

Synthesis of benzo[d]imidazo[2,1-b]benzoselenoazoles: Cs₂CO₃-mediated cyclization of 1-(2-bromoaryl)benzimidazoles with selenium

• Mio Matsumura,
• Yuki Kitamura,
• Arisa Yamauchi,
• Yoshitaka Kanazawa,
• Yuki Murata,
• Tadashi Hyodo,
• Kentaro Yamaguchi and
• Shuji Yasuike

Beilstein J. Org. Chem. 2019, 15, 2029–2035, doi:10.3762/bjoc.15.199

• probably deprotonation of the heterocyclic rings with a base. Moreover, nucleophilic aromatic substitution (SNAr) reactions between an aryl halide and a selenium reagent such as aryl selenide anion or diaryl diselenide for C(Ar)–Se bond formation using a base have been reported [20][21][22]. However, the

• mechanism is as depicted in Scheme 3. The base deprotonates the imidazole ring giving an anion at the 2-position, which reacts with selenium by nucleophilic attack, resulting in C(Het)–Se bond formation. Next, the ring closure proceeds via the SNAr reaction by attack of the selenide anion on the phenyl

Selenophene-containing heterotriacenes by a C–Se coupling/cyclization reaction

• Pierre-Olivier Schwartz,
• Sebastian Förtsch,
• Astrid Vogt,
• Elena Mena-Osteritz and
• Peter Bäuerle

Beilstein J. Org. Chem. 2019, 15, 1379–1393, doi:10.3762/bjoc.15.138

• after purification (Scheme 2). Other selenation reagents such as selenium powder or disodium selenide were tested as well, but were not successful in order to giving increased yields of DSS 4. In all reactions and optimization attempts, the TMS-groups were relatively quickly cleaved off from starting

Glycosylation reactions mediated by hypervalent iodine: application to the synthesis of nucleosides and carbohydrates

• Yuichi Yoshimura,
• Hideaki Wakamatsu,
• Yoshihiro Natori,
• Yukako Saito and
• Noriaki Minakawa

Beilstein J. Org. Chem. 2018, 14, 1595–1618, doi:10.3762/bjoc.14.137

• consecutive inter-/intramolecular SN2 reactions of 66 by selenide anion gave a 4-seleno sugar 67 in an excellent yield. After converting 67 to the corresponding selenoxide, the resulting 68 was immediately treated with uracil or N4-benzoylcytosine under the same conditions for Pummerer-type glycosylation to

Synthesis and photophysical properties of novel benzophospholo[3,2-b]indole derivatives

• Mio Matsumura,
• Mizuki Yamada,
• Atsuya Muranaka,
• Misae Kanai,
• Naoki Kakusawa,
• Daisuke Hashizume,
• Masanobu Uchiyama and
• Shuji Yasuike

Beilstein J. Org. Chem. 2017, 13, 2304–2309, doi:10.3762/bjoc.13.226

• ]indole 3 in 66% yield. Then, the chemical modification of the phosphorus atom of 3 was carried out and the results are shown in Scheme 2. The treatment of 3 with hydrogen peroxide, elemental sulfur, and elemental selenium afforded the corresponding phosphine oxide 4, sulfide 5, and selenide 6

• = 75%) was high, comparable to that of phosphole and indole-fused pentacyclic heteroacene (Ф = 70%) [35]. On the other hand, a low fluorescence intensity was observed for phosphine sulfide 5 and selenide 6 (Ф = 1% and 0.3%, respectively). Quenching of fluorescence emission due to a soft sulfur

• center. Because of the cationic nature of the phosphorus center, the energy levels in cationic phospholium 7 are significantly stabilized. In contrast to the fluorescent phospholes, calculations show that the HOMO and HOMO−1 of nonfluorescent phosphole sulfide 5 and selenide 6 have a large contribution

1,3-Dibromo-5,5-dimethylhydantoin as promoter for glycosylations using thioglycosides

• Fei-Fei Xu,
• Claney L. Pereira and
• Peter H. Seeberger

Beilstein J. Org. Chem. 2017, 13, 1994–1998, doi:10.3762/bjoc.13.195

• stereoselectivity of the reactions follows reported trends. This promoter system was successfully used for automated glycan assembly. DBDMH as promotor for automated glycan assembly. Modules: a) acidic wash; b) glycosylation using DBDMH/TMSOTf, 8; c) Fmoc deprotection. Hydrolysis of glycosyl selenide 17 with DBDMH

Transition-metal-free one-pot synthesis of alkynyl selenides from terminal alkynes under aerobic and sustainable conditions

• Adrián A. Heredia and
• Alicia B. Peñéñory

Beilstein J. Org. Chem. 2017, 13, 910–918, doi:10.3762/bjoc.13.92

• halides. Successive reaction with terminal alkynes in the presence of t-BuOK affords the corresponding alkyl alkynyl selenide in moderate to good yields. Finally, this methodology allowed the synthesis of 2-alkylselanyl-substituted benzofuran and indole derivatives starting from convenient 2-substituted

• acetylenes. Keywords: alkynyl selenide; electrophilic cyclization; nucleophilic substitution; potassium selenocyanate; terminal alkynes; Introduction Alkynyl selenides, as many other selenium compounds, have potential anti-oxidant activities, and may play a role in certain diseases such as cancer, heart

• applications of alkynyl selenides are electrophilic addition reactions, many of them modulated by transition-metal catalysts [11]. Some examples are: hydroboration which results in a vinylborane selenide used in Pd-catalyzed Suzuki cross-coupling reactions [12], the addition to tributyltin hydride in the

Ultrasound-promoted organocatalytic enamine–azide [3 + 2] cycloaddition reactions for the synthesis of ((arylselanyl)phenyl-1H-1,2,3-triazol-4-yl)ketones

• Gabriel P. Costa,
• Natália Seus,
• Juliano A. Roehrs,
• Raquel G. Jacob,
• Ricardo F. Schumacher,
• Thiago Barcellos,
• Rafael Luque and
• Diego Alves

Beilstein J. Org. Chem. 2017, 13, 694–702, doi:10.3762/bjoc.13.68

• were not described, preliminary studies were attempted to react 2-azidophenyl phenyl selenide (1a) and 2,4-pentanedione (2a) as model reaction substrates. Based on our previous report on such reaction [33], a mixture of substrates 1a (0.3 mmol) and 2a (0.3 mmol) in DMSO (0.6 mL) was stirred at room

• -1-one (3a) were clearly present in entry 7, in which a mixture of azidophenyl phenyl selenide (1a, 0.3 mmol), 2,4-pentanedione (2a, 0.3 mmol) and Et2NH (1 mol %) in DMSO (0.6 mL) was sonicated using 40% of amplitude at room temperature for 5 minutes. In order to extend the scope of the reaction

•  2, entries 6–9). However, a decrease in yield was observed when the reaction was performed with aryl azidophenyl selenide containing a –CF3 group (Table 2, entry 9). In addition, 4-azidophenyl phenyl selenide (1f) was treated with 2,4-pentanedione (2a) to afford the desired product 3j in 92% yield

Total synthesis of a Streptococcus pneumoniae serotype 12F CPS repeating unit hexasaccharide

• Peter H. Seeberger,
• Claney L. Pereira and
• Subramanian Govindan

Beilstein J. Org. Chem. 2017, 13, 164–173, doi:10.3762/bjoc.13.19

• steps from known galactosylazide selenide 23 [29]. Acetylation of the C3 hydroxy group of 23 furnished fully differentially protected selenoglycoside 24 in 82% yield. Hydrolysis of the selenoglycoside using NIS in aqueous THF produced hemiacetal 25 that was silylated prior to selective saponification of

Studies on the synthesis of peptides containing dehydrovaline and dehydroisoleucine based on copper-mediated enamide formation

• Franziska Gille and
• Andreas Kirschning

Beilstein J. Org. Chem. 2016, 12, 564–570, doi:10.3762/bjoc.12.55

• typically this is achieved by elimination when a leaving group occupies the β-position [2]. Especially peptides containing dehydroalanine as found in argyrin (2) can be prepared from a precursor that contains a selenide substituent in the β-position [3]. Peptides that bear the doubly branched dehydroamino

A journey in bioinspired supramolecular chemistry: from molecular tweezers to small molecules that target myotonic dystrophy

• Steven C. Zimmerman

Beilstein J. Org. Chem. 2016, 12, 125–138, doi:10.3762/bjoc.12.14

• mid to late 1970s. I was fortunate to do undergraduate research with Professor Hans J. Reich, investigating the mechanism of the singlet oxygen reaction with alkenes and studying the oxidation of selenide/sulfide mixtures using ozone and singlet oxygen [1]. In my senior year, I took three graduate

Selected synthetic strategies to cyclophanes

• Sambasivarao Kotha,
• Mukesh E. Shirbhate and
• Gopalkrushna T. Waghule

Beilstein J. Org. Chem. 2015, 11, 1274–1331, doi:10.3762/bjoc.11.142

Selenium halide-induced bridge formation in [2.2]paracyclophanes

• Laura G. Sarbu,
• Henning Hopf,
• Peter G. Jones and
• Lucian M. Birsa

Beilstein J. Org. Chem. 2014, 10, 2550–2555, doi:10.3762/bjoc.10.266

• introduction of new bridges to [2.2]paracyclophanes, we decided to investigate a double addition reaction of 1 equiv of selenium dichloride to both triple bonds of 4,13-bis(ethynyl)[2.2]paracyclophane 1; a bis(vinyl)selenide bridge should result from this interaction. Thus, by reacting 1 with one equivalent of

Magnesium bis(monoperoxyphthalate) hexahydrate as mild and efficient oxidant for the synthesis of selenones

• Andrea Temperini,
• Massimo Curini,
• Ornelio Rosati and
• Lucio Minuti

Beilstein J. Org. Chem. 2014, 10, 1267–1271, doi:10.3762/bjoc.10.127

• was not reported before. Results and Discussion Firstly, a solution of selenide 1a in ethanol was treated with 2.4 equiv of MMPP at room temperature to obtain the corresponding selenone 2a in 94% yield (Table 1, entry 1). The known oxidation of selenide 1a with MCPBA in dichloromethane [4] gave the

• fully characterized by classical spectroscopic analysis and high resolution mass spectrometry. However, it is important to note that the oxidation of selenide 1b with MCPBA in methanol did not give selenone 2b but the corresponding methyl cyclopentyl ketone deriving from ring contraction [20]. On the

• intermediates which readily undergo intramolecular SN2 type substitution reactions to afford a range of heterocyclic compounds (Table 2, entries 2–7) and benzeneseleninic acid. Thus, the oxidation of β-hydroxyalkyl phenyl selenide 1e gave, in tetrahydrofuran and in the presence of dipotassium hydrogen phosphate

The chemistry of isoindole natural products

• Klaus Speck and
• Thomas Magauer

Beilstein J. Org. Chem. 2013, 9, 2048–2078, doi:10.3762/bjoc.9.243

• selenide. Oxidation and elimination of the corresponding selenoxide at elevated temperature generated the necessary dienophile, which directly underwent an intramolecular endo-Diels–Alder reaction to give the isoindolinone 68. For the synthesis of 69 another ten steps were necessary to discriminate between

• synthesis of cytochalasin D (70), namely oxidation of the selenide to the selenoxide, elimination and intramolecular Diels–Alder reaction, isoindolinone 90 could be obtained in moderate yield. Removal of the protecting groups then yielded aspergillin PZ (91). Though having established a rather long and low