Solvent-free synthesis of enantioenriched β-silyl nitroalkanes under organocatalytic conditions

• Akhil K. Dubey and
• Raghunath Chowdhury

Beilstein J. Org. Chem. 2021, 17, 2642–2649, doi:10.3762/bjoc.17.177

• -unsaturated carbonyl compounds catalyzed by bifunctional squaramide catalysts has been developed. This methodology offers both enantiomers of β-silyl nitroalkanes in good to excellent yields (up to 92%) and enantioselectivities (up to 97.5% ee) under solvent-free conditions at room temperature. Control

• experiments reveal that the presence of a β-silyl group in the enones is crucial for high reactivity under the optimized reaction conditions. Keywords: β-silyl α,β-unsaturated carbonyl compounds; β-silyl nitroalkanes; chiral organosilanes; organocatalysis; solvent-free synthesis; Introduction

• organosilanes [29][37][38], we present herein an organocatalyzed conjugate addition reaction of nitromethane to β-silyl enones to afford chiral β-silyl nitroalkanes (Scheme 1). Notably, the developed method was not only carried out under solvent-free conditions at room temperature but was found to be tolerant

N-Sulfinylpyrrolidine-containing ureas and thioureas as bifunctional organocatalysts

• Viera Poláčková,
• Dominika Krištofíková,
• Boglárka Némethová,
• Renata Górová,
• Mária Mečiarová and
• Radovan Šebesta

Beilstein J. Org. Chem. 2021, 17, 2629–2641, doi:10.3762/bjoc.17.176

• Michael additions of aldehydes to nitroalkenes both under solvent-free conditions and in solution. The N-sulfinylurea catalyst was more efficient than the corresponding thiourea. For some substrates, enantioselectivities reached 98% ee. The stereogenic center on the sulfur did not have a considerable

• organocatalytic transformations were successfully performed under solvent-free ball-milling conditions [30][31]. In this context, we describe the synthesis of new pyrrolidine appended sulfinylurea and thiourea organocatalysts and their assessment in Michael additions of aldehydes to nitroalkenes. Furthermore, we

• have evaluated the suitability of these catalysts under solvent-free conditions. With the help of DFT calculations, we elucidated the mode of action of these catalysts. Results and Discussion Synthesis of catalysts We have started the synthesis of the catalysts from Boc-protected (S)-prolinol (1), from

A novel methodology for the efficient synthesis of 3-monohalooxindoles by acidolysis of 3-phosphate-substituted oxindoles with haloid acids

• Li Liu,
• Yue Li,
• Tiao Huang,
• Dulin Kong and
• Mingshu Wu

Beilstein J. Org. Chem. 2021, 17, 2321–2328, doi:10.3762/bjoc.17.150

• ) under solvent-free and catalyst-free conditions at room temperature (Table 1, entry 1). To our delight, the desired product 3a was obtained in 19% yield. To further improve the yield, we firstly probed the solvent effect using methanol, THF, toluene, ClCH2CH2Cl, 1,4-dioxane, chloroform, dichloromethane

An initiator- and catalyst-free hydrogel coating process for 3D printed medical-grade poly(ε-caprolactone)

• Jochen Löblein,
• Thomas Lorson,
• Miriam Komma,
• Tobias Kielholz,
• Maike Windbergs,
• Paul D. Dalton and
• Robert Luxenhofer

Beilstein J. Org. Chem. 2021, 17, 2095–2101, doi:10.3762/bjoc.17.136

• medical devices where implants can be personalized to improve outcomes in patients [3]. Here, compliance to the regulatory pathway [4][5] is important, which favors solvent-free processing technologies of medical-grade raw materials. Solvent-free 3D printing approaches such as electron beam melting [6

• achieved with self-initiated photografting and photopolymerization (SIPGP, Scheme 1). SIPGP is a simple, solvent-free bulk/surface photografting first introduced by Deng et al. grafting maleic anhydride [20] and styrene [21] onto low-density poly(ethylene) films. Later, this was extended for other monomers

Recent advances in the syntheses of anthracene derivatives

• Giovanni S. Baviera and
• Paulo M. Donate

Beilstein J. Org. Chem. 2021, 17, 2028–2050, doi:10.3762/bjoc.17.131

• -disubstituted-anthracenes from bis(dihexyloxyphenyl)arylmethanes or diveratrylmethanes and aromatic acylals [44]. In the first step, reaction between aromatic aldehydes 49 and acetic anhydride (50) promoted by Bi(OTf)3 under solvent-free conditions afforded aromatic acylals 51 (Scheme 11). In the next two steps

• (diphenylphosphino)ethane (DPPE) as ligand improved the yield of the anthraquinones. Representative examples included anthraquinones 179a and 179b obtained from terminal alkynes and 179c and 179d from internal alkynes [75]. Multicomponent reactions In 2009, Singh and co-workers reported a solvent-free methodology to

• -workers [77] provided better results. In a related approach, Estévez-Braun and co-workers synthesized dibenzo[a,h]anthracene-12,13-diones 188 from 2-hydroxy-1,4-naphthoquinone (186), β-naphthol (181), and aromatic aldehydes 187 through a multicomponent reaction that used InCl3 as catalyst under solvent

Development of N-F fluorinating agents and their fluorinations: Historical perspective

• Teruo Umemoto,
• Yuhao Yang and
• Gerald B. Hammond

Beilstein J. Org. Chem. 2021, 17, 1752–1813, doi:10.3762/bjoc.17.123

Electron-rich triarylphosphines as nucleophilic catalysts for oxa-Michael reactions

• Susanne M. Fischer,
• Simon Renner,
• A. Daniel Boese and
• Christian Slugovc

Beilstein J. Org. Chem. 2021, 17, 1689–1697, doi:10.3762/bjoc.17.117

• triphenylphosphine (TPP) in catalyzing oxa-Michael additions. A matrix consisting of three differently strong Michael acceptors and four alcohols of varying acidity was used to assess the activity of the three catalysts. All test reactions were performed with 1 mol % catalyst loading, under solvent-free conditions

• chemistry; organocatalysis; phosphine; solvent-free synthesis; Introduction Phosphines are potent nucleophiles that are used as catalysts in many reactions, like Rauhut–Currier, Morita–Baylis–Hillman or Michael reactions [1][2][3]. The first step of these reactions is a conjugate addition of the phosphine

• highlight that solvent-free conditions are particularly effective and allow for reducing the catalyst loading by the factor of 10, thereby obtaining a higher share of 3dia and full conversion towards 3dic. Interestingly, the catalytic activity of TPP in reactions with 3 as the Michael acceptor is only

A recent overview on the synthesis of 1,4,5-trisubstituted 1,2,3-triazoles

• Pezhman Shiri,
• Ali Mohammad Amani and
• Thomas Mayer-Gall

Beilstein J. Org. Chem. 2021, 17, 1600–1628, doi:10.3762/bjoc.17.114

• reductive elimination occurs in the presence of base to achieve the desired product 119 (Scheme 36) [59]. Direct arylation of disubstituted triazoles 123 with aryl halides 124 using a Pd/C catalyst under solvent-free conditions to give fully decorated triazoles 125 was reported by Farinola et al. Different

A straightforward conversion of 1,4-quinones into polycyclic pyrazoles via [3 + 2]-cycloaddition with fluorinated nitrile imines

• Greta Utecht-Jarzyńska,
• Karolina Nagła,
• Grzegorz Mlostoń,
• Heinz Heimgartner,
• Marcin Palusiak and
• Marcin Jasiński

Beilstein J. Org. Chem. 2021, 17, 1509–1517, doi:10.3762/bjoc.17.108

• during the work-up to give pyrazole 9a as the final product. It is worth mentioning that the solvent-free mechanochemical approach also led to the desired product, albeit a lower yield of 9a was noticed. In these reactions, a sticky material was obtained, which was difficult to grind and therefore

Co-crystallization of an organic solid and a tetraaryladamantane at room temperature

• Fabian Rami,
• Jan Nowak,
• Felix Krupp,
• Wolfgang Frey and
• Clemens Richert

Beilstein J. Org. Chem. 2021, 17, 1476–1480, doi:10.3762/bjoc.17.103

• that the encapsulation of the guest molecules in the crystals occurs as a kinetic phenomenon [17]. The TAA finds a crystalline arrangement quickly, without full desolvation, and once the crystal lattice has formed, the guest molecule is unable to escape from it, blocking the path to solvent-free

• crystals that may be thermodynamically more favorable. As noted above, tightly packed solvent-free crystal systems exist for TAAs [12]. So, what is the most likely process underlying the co-crystal formation observed in our current study? Figure 3 shows possible molecular situations in cartoon format. We

Synthesis of 1-indolyl-3,5,8-substituted γ-carbolines: one-pot solvent-free protocol and biological evaluation

• Premansh Dudhe,
• Mena Asha Krishnan,
• Kratika Yadav,
• Diptendu Roy,
• Krishnan Venkatasubbaiah,
• Biswarup Pathak and
• Venkatesh Chelvam

Beilstein J. Org. Chem. 2021, 17, 1453–1463, doi:10.3762/bjoc.17.101

•  7), whereas only little uptake was observed at a concentration of 100 nM (Figure S3, Supporting Information File 1). Conclusion In summary, we have developed an operationally simple one-pot synthetic protocol for the synthesis of highly substituted γ-carboline derivatives. The metal- and solvent

• -free method provides direct access to complex molecular structures in good yield from inexpensive substrates. The optical and biological evaluations carried out for representative γ-carbolines revealed promising photophysical and anticancer properties of the core framework for developing novel

A comprehensive review of flow chemistry techniques tailored to the flavours and fragrances industries

• Guido Gambacorta,
• James S. Sharley and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2021, 17, 1181–1312, doi:10.3762/bjoc.17.90

• for the water removal instead employed either DMSO or ionic liquids as additives for the water removal. The same condensation (of 17 to 127) was also performed by Clark et al. using a silica-coated microreactor with an AP-T catalyst deposited on the reactor’s walls [160]. The solvent-free approach

N-tert-Butanesulfinyl imines in the asymmetric synthesis of nitrogen-containing heterocycles

• Joseane A. Mendes,
• Paulo R. R. Costa,
• Miguel Yus,
• Francisco Foubelo and
• Camilla D. Buarque

Beilstein J. Org. Chem. 2021, 17, 1096–1140, doi:10.3762/bjoc.17.86

• was the only effective reagent when performing the reaction at 60 °C in THF [16]. Ketimines were also synthesized with Ti(OEt)4, under microwave irradiation in a solvent-free system [20]. In hindered ketones, Ti(OiPr)4 or Ti(OEt)4 using vacuum or under a nitrogen flow were effective to tert

• under solvent-free conditions was carried out, using sodium carbonate as base promoter. The resulting dimethyl 2-(1-aminoalkyl)malonates 50 were obtained in moderate to good yields as single diastereoisomers in all cases except for aromatic aldimines. Compounds 50 could be easily transformed

Prins cyclization-mediated stereoselective synthesis of tetrahydropyrans and dihydropyrans: an inspection of twenty years

• Asha Budakoti,
• Pradip Kumar Mondal,
• Prachi Verma and
• Jagadish Khamrai

Beilstein J. Org. Chem. 2021, 17, 932–963, doi:10.3762/bjoc.17.77

• cyclization reaction of allyl bromide (228) with a carbonyl compound promoted by BBIMBr/SnBr2 complex under solvent-free conditions has been explored [97]. The mechanism of the reaction was shown to include a Barbier reaction of allyl bromide with an aldehyde in the presence of SnBr3 and a quaternary ammonium

Microwave-assisted multicomponent reactions in heterocyclic chemistry and mechanistic aspects

• Shivani Gulati,
• Stephy Elza John and
• Nagula Shankaraiah

Beilstein J. Org. Chem. 2021, 17, 819–865, doi:10.3762/bjoc.17.71

• irradiation under solvent-free conditions. The library of compounds proved to be active as xanthine oxidase inhibitors with the most potent molecule showcasing IC50 = 4 μM (Scheme 21). 5 Pyrroles Pyrroles are five-membered heterocycles consisting of four carbon atoms and a nitrogen atom. The pyrrole ring is

• construction of dihydropyrimidinones 78 utilizing a three-component reaction of acyclic 1,3-diketones 54, urea/thiourea (77) and aldehyde 5 exploring La2O3 as catalyst under microwave irradiation under solvent-free conditions with good functional group tolerance and excellent yields (Scheme 28). The reaction

• first time reported a microwave-assisted four-component domino reaction involving acyclic 1,3-diketones 54, amines 32, diethyl malonate (126) and triethyl orthoformate (111) for the synthesis of substituted pyridone derivatives 127 at 120 °C under catalyst- and solvent-free conditions. The reaction

Synthesis of dibenzosuberenone-based novel polycyclic π-conjugated dihydropyridazines, pyridazines and pyrroles

• Ramazan Koçak and
• Arif Daştan

Beilstein J. Org. Chem. 2021, 17, 719–729, doi:10.3762/bjoc.17.61

• dibenzosuberenone (1) with tetrazines 2a–l. Inverse electron-demand Diels–Alder reactions between dibenzosuberenone 1 and tetrazines 2ka and 2lb. a5.55 mmol 1, 3.70 mmol 2k, 10 mL toluene, 120 ˚C, 48 h. b4.85 mmol 1, 0.98 mmol 2l, 100 ˚C, overnight (solvent free). Proposed reaction mechanism for the formation of

Valorisation of plastic waste via metal-catalysed depolymerisation

• Francesca Liguori,
• Carmen Moreno-Marrodán and
• Pierluigi Barbaro

Beilstein J. Org. Chem. 2021, 17, 589–621, doi:10.3762/bjoc.17.53

• in >97% yield into liquid hydrocarbon (alkane) products having a narrow distribution of the molecular weight (960–1130 g⋅mol−1) under 11.7 bar H2 at 300 °C and solvent-free conditions [146]. The pyrolysis oils produced may be used as lubricants, waxes or further processed into detergents and

A new and efficient methodology for olefin epoxidation catalyzed by supported cobalt nanoparticles

• Lucía Rossi-Fernández,
• Viviana Dorn and
• Gabriel Radivoy

Beilstein J. Org. Chem. 2021, 17, 519–526, doi:10.3762/bjoc.17.46

• solvent (DMF, MeCN, ethyl acetate, DMSO, solvent free) on the activity and selectivity of the nanocatalysts has been noted [27][41][42][43][44]. Furthermore, all the reported methodologies use either molecular oxygen together with an aldehyde as a co-reductant, or only a “green” peroxide (H2O2, TBHP) as

• . reported on a Co3O4/TiO2-catalyzed solvent-free version that allowed the use of molecular oxygen together with sub-stoichiometric amounts of TBHP as radical initiator at 80 °C, with conversions lower than 40% and ca. 20% selectivity in the epoxidation of 1-decene as the only substrate tested [42]. On the

Mesoionic tetrazolium-5-aminides: Synthesis, molecular and crystal structures, UV–vis spectra, and DFT calculations

• Vladislav A. Budevich,
• Sergei V. Voitekhovich,
• Alexander V. Zuraev,
• Vadim E. Matulis,
• Vitaly E. Matulis,
• Alexander S. Lyakhov,
• Ludmila S. Ivashkevich and
• Oleg A. Ivashkevich

Beilstein J. Org. Chem. 2021, 17, 385–395, doi:10.3762/bjoc.17.34

• , however, the residual electron density in the voids was difficult to model and therefore, the SQUEEZE routine in PLATON [45] was used to remove the contribution of the electron density in the solvent region from the intensity data and the solvent-free model was employed for the final refinement. The

An atom-economical addition of methyl azaarenes with aromatic aldehydes via benzylic C(sp³)–H bond functionalization under solvent- and catalyst-free conditions

• Divya Rohini Yennamaneni,
• Vasu Amrutham,
• Krishna Sai Gajula,
• Rammurthy Banothu,
• Murali Boosa and
• Narender Nama

Beilstein J. Org. Chem. 2020, 16, 3093–3103, doi:10.3762/bjoc.16.259

• 19, Kamala Nehru Nagar, Ghaziabad, UP-201002, India 10.3762/bjoc.16.259 Abstract A convenient practical approach for the synthesis of 2-(pyridin-2-yl)ethanols by direct benzylic addition of azaarenes and aldehydes under catalyst- and solvent-free conditions is reported. This reaction is metal-free

• azaarene derivatives under neat conditions through a highly atom-economical pathway. To evaluate the preparative potential of this process, gram-scale reactions were performed up to a 10 g scale. Keywords: aldehydes; azaarenes; benzylic addition; green chemistry; solvent-free conditions; Introduction

• , variations in the absorption, an inadequate penetrating ability of the radiation into the reaction medium, and further reflection of the microwaves. Nevertheless, the solvent was water, which required long extraction processes compared to solvent-free conditions. Castro and co-workers have also reported the

Deoxyfluorination of acyl fluorides to trifluoromethyl compounds by FLUOLEAD^®/Olah’s reagent under solvent-free conditions

• Yumeng Liang,
• Akihito Taya,
• Zhengyu Zhao,
• Norimichi Saito and
• Norio Shibata

Beilstein J. Org. Chem. 2020, 16, 3052–3058, doi:10.3762/bjoc.16.254

• the formation of trifluoromethyl compounds from acyl fluorides has been developed. The combination of FLUOLEAD® and Olah’s reagent in solvent-free conditions at 70 °C initiated the significant deoxyfluorination of the acyl fluorides and resulted in the corresponding trifluoromethyl products with high

• trifluoromethyl compounds under the same reaction conditions. A reaction mechanism is proposed. Keywords: acyl fluorides; deoxyfluorination; fluorine; solvent-free; trifluoromethyl group; Introduction Due to an impressively wide effect of fluorine on the biological activity, the insertion of fluorine atoms or

• herein report the efficient deoxyfluorination protocol of acyl fluorides to the trifluoromethyl compounds using FLUOLEAD® (Scheme 1e). The key to the successful transformation is the use of FLUOLEAD® combined with Olah’s reagent [36] in solvent-free conditions. A wide variety of acyl fluorides involving

Regioselective synthesis of heterocyclic N-sulfonyl amidines from heteroaromatic thioamides and sulfonyl azides

• Vladimir Ilkin,
• Vera Berseneva,
• Tetyana Beryozkina,
• Tatiana Glukhareva,
• Lidia Dianova,
• Wim Dehaen,
• Eugenia Seliverstova and
• Vasiliy Bakulev

Beilstein J. Org. Chem. 2020, 16, 2937–2947, doi:10.3762/bjoc.16.243

• have found that 1-butyl-1,2,3-triazole-4-carbothioamide (1c) reacts well with benzenesulfonyl azide (2c) in various solvents to form the desired 1-butyl-1,2,3-N-sulfonyl amidine 3n in diverse solvents such as n-butanol, n-propanol, toluene, ethanol, water and even under solvent-free conditions (see

• Table 1 for the yields and other circumstances). From these data we can conclude that the yield of the final product is optimal for the reaction under solvent-free conditions. 1-Butyl-1,2,3-triazole 1с reacts faster than 1,2,3-triazole-4-carbothioamide 1f while using a lower amount of a sulfonyl azide

• (Table 1, entry 11 and Table 2, entry 14). Thus solvent-free conditions, a temperature of 88 °C and a thioamide/azide ratio of 1:2.5 are optimal to prepare N-sulfonyl amidine 1c (entry 11, Table 1). Next, these optimized conditions were used for the synthesis of a small library of 1-alkyl-1,2,3-triazoles

Ultrasound-assisted Strecker synthesis of novel 2-(hetero)aryl-2-(arylamino)acetonitrile derivatives

• Emese Gal,
• Luiza Gaina,
• Hermina Petkes,
• Alexandra Pop,
• Castelia Cristea,
• Gabriel Barta,
• Dan Cristian Vodnar and
• Luminiţa Silaghi-Dumitrescu

Beilstein J. Org. Chem. 2020, 16, 2929–2936, doi:10.3762/bjoc.16.242

• using “green” solvents, for example, low vapor pressure solvents such as ionic liquids [3], low volatile solvents such as glycerol, ethylene glycol and its oligomers, or nontoxic water solvent, as well as in heterogeneous media under solvent-free conditions [4]. Other advantages induced by sonication

One-pot multicomponent green Hantzsch synthesis of 1,2-dihydropyridine derivatives with antiproliferative activity

• Giovanna Bosica,
• Kaylie Demanuele,
• José M. Padrón and
• Adrián Puerta

Beilstein J. Org. Chem. 2020, 16, 2862–2869, doi:10.3762/bjoc.16.235

• , and the mechanism depends much on the identity of the substrates and the reaction conditions used [18]. Cao and collaborators have managed to synthesize the 1,2-dihydropyridine (1,2-DHP) regioisomer as the main product through the Hantzsch synthesis at room temperature and solvent-free conditions

• used since it offers a greener alternative to homogeneous catalysis and ideally a solvent-free design to reduce the amount of solvent waste [21][22]. These two factors will reduce the amount of hazardous chemicals by reducing the amount of solvent in the reactor and during the workup of the product. A

• included room temperature, a stoichiometric molar ratio of the reactants, using 40 wt % PW loaded on alumina under solvent-free conditions. These conditions satisfied the green protocol we were aiming for. Therefore, from this stage we moved onto the next one by changing the substrates to explore the

The B & B approach: Ball-milling conjugation of dextran with phenylboronic acid (PBA)-functionalized BODIPY

• Patrizia Andreozzi,
• Lorenza Tamberi,
• Elisamaria Tasca,
• Gina Elena Giacomazzo,
• Marta Martinez,
• Mirko Severi,
• Marco Marradi,
• Stefano Cicchi,
• Sergio Moya,
• Giacomo Biagiotti and
• Barbara Richichi

Beilstein J. Org. Chem. 2020, 16, 2272–2281, doi:10.3762/bjoc.16.188

• , Poland 10.3762/bjoc.16.188 Abstract Mechanochemistry is an emerging and reliable alternative to conventional solution (batch) synthesis of complex molecules under green and solvent-free conditions. In this regard, we report here on the conjugation of a dextran polysaccharide with a fluorescent probe, a

• reactions, and even in nanomaterials preparation [1][2][3][4][5]. Indeed, solid-state mechanochemical methodologies are a viable alternative to traditional syntheses in solution [4] for the preparation of complex molecules, either under solvent-free conditions, named ‘neat grinding’, or in nearly solvent

• short reaction time, reactant economy, higher degree of functionalization, and solvent-free conditions, compared to solution-based routes are discussed. The dextran mechanochemically conjugated to PBA-BODIPY (Dex-1b, Figure 1) formed nanoparticles through self-assembly retaining the fluorescent