Ortho-ester-substituted diaryliodonium salts enabled regioselective arylocyclization of naphthols toward 3,4-benzocoumarins

• Ke Jiang,
• Cheng Pan,
• Limin Wang,
• Hao-Yang Wang and
• Jianwei Han

Beilstein J. Org. Chem. 2024, 20, 841–851, doi:10.3762/bjoc.20.76

• Technology, 130 Meilong Road, Shanghai 200237, P. R. China National Center for Organic Mass Spectrometry in Shanghai, Shanghai Institute of Organic Chemistry, The Chinese Academy of Sciences, 345 Lingling Road, Shanghai 200032, China 10.3762/bjoc.20.76 Abstract Cyclic annulation involving diaryliodonium

• salts is an efficient tool for the construction of two or more chemical bonds in a one-pot process. Ortho-functionalized diaryliodonium salts have showcased distinct reactivity in the exploration of benzocyclization or arylocyclization. With this strategy of ortho-ester-substituted diaryliodonium salts

• , herein, we utilized a copper catalyst to activate the C–I bond of diaryliodonium salts in the generation of aryl radicals, thus resulting in an annulation reaction with naphthols and substituted phenols. This approach yielded a diverse array of 3,4-benzocoumarin derivatives bearing various substituents

Synthesis of N-acyl carbazoles, phenoxazines and acridines from cyclic diaryliodonium salts

• Nils Clamor,
• Mattis Damrath,
• Thomas J. Kuczmera,
• Daniel Duvinage and
• Boris J. Nachtsheim

Beilstein J. Org. Chem. 2024, 20, 12–16, doi:10.3762/bjoc.20.2

• Bremen, Germany 10.3762/bjoc.20.2 Abstract N-Acyl carbazoles can be efficiently produced through a single-step process using amides and cyclic diaryliodonium triflates. This convenient reaction is facilitated by copper iodide in p-xylene, using the commonly found activating ligand diglyme. We have

• diaryliodonium salts [29][31], as well as Pd-catalysed methods for synthesizing N-aryl carbazoles [32]. Similar procedures were published for the Cu-catalysed synthesis of aryl carbazoles from amines as well as other heterocycles such as N-acyl acridanes with nitriles using cyclic iodonium salts by Wen and Chen

• [33][34]. Results and Discussion Initially, we investigated the synthesis of N-acyl carbazole by treatment of diaryliodonium salt 1a with valeramide using Cu(I) catalysts [18]. The results are shown in Table 1. In the first experiments in p-xylene at 120 °C with DMEDA as N,N-ligand, only modest

Trifluoromethylated hydrazones and acylhydrazones as potent nitrogen-containing fluorinated building blocks

• Zhang Dongxu

Beilstein J. Org. Chem. 2023, 19, 1741–1754, doi:10.3762/bjoc.19.127

• -triazolines and their derivatives via tandem 1,2-addition/cyclization reactions between trifluoromethyl acylhydrazones and cyanamide [105] (Scheme 17b). Afterwards, Hu et al. developed a method for the N-arylation and N-alkylation of trifluoromethyl acylhydrazones with diaryliodonium salts and alkyl halides

Exploring the role of halogen bonding in iodonium ylides: insights into unexpected reactivity and reaction control

• Carlee A. Montgomery and
• Graham K. Murphy

Beilstein J. Org. Chem. 2023, 19, 1171–1190, doi:10.3762/bjoc.19.86

• (I-6, 0.042 e) and dichloroiodobenzene (I-7, 0.060 e) showed similar potentials with I-2 and I-3, with the weaker σ-hole found on the more covalent difluoroiodoarene species I-6 [72][87]. The symmetric diaryliodonium salts I-8 and I-9 each presented two σ-holes, with the acyclic variant’s potentials

• Liang also assessed the effect of ortho-substituents on iodonium ylides undergoing radiofluorination, similar to that encountered with diaryliodonium salts [135][136][137][138]. They prepared a series of ylides (61a–d) with substituents situated ortho- or para- to iodine, and found the radiochemical

• of diaryliodonium salts [136][140]. Incorporation of a Lewis basic ether that could participate in secondary bonding with iodine was critical, and further improvements were realized when this Lewis base was not deactivating the ring (62c vs 62d). From these examples, the evidence suggests that σ

Copper-catalyzed N-arylation of amines with aryliodonium ylides in water

• Kasturi U. Nabar,
• Bhalchandra M. Bhanage and
• Sudam G. Dawande

Beilstein J. Org. Chem. 2023, 19, 1008–1014, doi:10.3762/bjoc.19.76

• types of hypervalent iodine reagents, diaryliodonium salts are commonly used reagents for the N-arylation of nitrogen-containing compounds, particularly for N-arylation of amines under catalyst-free conditions either in the presence of additives or at higher temperatures [26][27][28][29][30][31][32

• ]. Further, a few reports are also available for the copper and palladium-catalyzed N-arylation of primary and secondary aliphatic as well as aromatic amines using diaryliodonium salts as aryl sources [33][34][35] (Scheme 1a). Similarly, iodonium ylides undergo a wide range of reactions through in situ

Synthesis and reactivity of azole-based iodazinium salts

• Thomas J. Kuczmera,
• Annalena Dietz,
• Andreas Boelke and
• Boris J. Nachtsheim

Beilstein J. Org. Chem. 2023, 19, 317–324, doi:10.3762/bjoc.19.27

• highly versatile, and a wide range of applications is meanwhile established in organic synthesis [1][2][3][4][5]. They can be applied as mild oxidants [6][7][8], in phenol dearomatizations [9] or in α-oxygenation reactions [10]. In a complemental reactivity, diaryliodonium salts are potent electrophilic

Two-step continuous-flow synthesis of 6-membered cyclic iodonium salts via anodic oxidation

• Julian Spils,
• Thomas Wirth and
• Boris J. Nachtsheim

Beilstein J. Org. Chem. 2023, 19, 27–32, doi:10.3762/bjoc.19.2

• continuous-flow procedure for the generation of six-membered diaryliodonium salts. The accompanying scalability and atom economy are significant improvements to existing batch methods. Benzyl acetates are submitted to this two-step procedure as highly available and cheap starting materials. An acid-catalyzed

• blocks for the synthesis of natural products [16][17][18][19][20][21]. One subclass of HVIs is diaryliodonium salts (DIS), which have been used as versatile electrophilic arylation reagents in metal-catalyzed and metal-free reactions [22][23]. The corresponding cyclic diaryliodonium salts (CDIS) have

• . Conclusion In summary, we have developed the first multi-step continuous-flow procedure for the generation of cyclic six-membered diaryliodonium salts. Starting from easily accessible benzyl acetates we were able to combine a Friedel–Crafts alkylation with a subsequent anodic oxidative cyclization in flow

Iron-catalyzed domino coupling reactions of π-systems

• Austin Pounder and
• William Tam

Beilstein J. Org. Chem. 2021, 17, 2848–2893, doi:10.3762/bjoc.17.196

• authors noted the use of the diaryliodonium salt Ph2IOTf was critical, with no reaction being observed in its absence. In 2020, Li and Shen reported a similar transformation for the synthesis of chloro-containing oxindoles 141 (Scheme 28) [122]. Interestingly, the authors reported the reaction was able to

• operate in the absence of any external oxidants under an inert atmosphere. Although not investigated, Loh’s transformation most likely begins with the generation of an aryl radical from the reduction of the diaryliodonium salt with Fe(II) which subsequently abstracts a hydrogen from CH2Cl2 to generate an

Transition-metal-free intramolecular Friedel–Crafts reaction by alkene activation: A method for the synthesis of some novel xanthene derivatives

• Tülay Yıldız,
• İrem Baştaş and
• Hatice Başpınar Küçük

Beilstein J. Org. Chem. 2021, 17, 2203–2208, doi:10.3762/bjoc.17.142

• alcohols with diaryliodonium salts [26], the Sc(OTf)3-catalyzed domino reaction [27], and the iodine-catalyzed nucleophilic substitution reaction of xanthen-9-ol [28]. As an example of an intramolecular hydroarylation of an olefin, 9,10-dihydroacridines, which are N derivatives of xanthenes, were

Synthetic reactions driven by electron-donor–acceptor (EDA) complexes

• Zhonglie Yang,
• Yutong Liu,
• Kun Cao,
• Xiaobin Zhang,
• Hezhong Jiang and
• Jiahong Li

Beilstein J. Org. Chem. 2021, 17, 771–799, doi:10.3762/bjoc.17.67

• solvent (Scheme 57). The complex is bound together by weak halogen bonds, in which phosphorus lone-pair electrons interact with σ* orbitals of C–I bonds. A variety of arylphosphonates can be directly afforded by the simple combination of diaryliodonium salts and phosphite esters. In addition, calculations

When metal-catalyzed C–H functionalization meets visible-light photocatalysis

• Lucas Guillemard and
• Joanna Wencel-Delord

Beilstein J. Org. Chem. 2020, 16, 1754–1804, doi:10.3762/bjoc.16.147

• 2012 the possibility to extend this C–H activation/photoredox dual catalytic system by using diaryliodonium salts as radical precursors [83]. Considering the higher reduction potentials of these compounds in comparison with the corresponding diazoniums, a stronger reductive iridium-based photocatalyst

Copper-based fluorinated reagents for the synthesis of CF₂R-containing molecules (R ≠ F)

• Louise Ruyet and
• Tatiana Besset

Beilstein J. Org. Chem. 2020, 16, 1051–1065, doi:10.3762/bjoc.16.92

• was illustrated through the 1,1-difluoroethylation of diaryliodonium salts, leading to the corresponding (1,1-difluoroethyl)arenes in moderate to high yields (Scheme 13). The transformation turned out to be functional group tolerant and even heteroaromatic compounds were functionalized. Copper-based

• (diethylphosphono)difluoromethylthiolated molecules via the in situ generation of CuCF2PO(OEt)2 species. Synthesis of (phenylsulfonyl)difluoromethyl-containing molecules via the in situ generation of CuCF2SO2Ph species. Copper-mediated 1,1-difluoroethylation of diaryliodonium salts by using the in situ-generated

Copper-catalyzed O-alkenylation of phosphonates

• Nuria Vázquez-Galiñanes,
• Mariña Andón-Rodríguez,
• Patricia Gómez-Roibás and
• Martín Fañanás-Mastral

Beilstein J. Org. Chem. 2020, 16, 611–615, doi:10.3762/bjoc.16.56

• subject to selectivity problems, involve toxic and hazardous materials or are limited to the restricted availability of the corresponding phosphorus reagents. Therefore, the development of alternative methods for the synthesis of acyclic enol phosphonates is highly desirable. Diaryliodonium and aryl

• Feringa recently reported a catalytic method for the synthesis of mixed alkyl aryl phosphonates based on a copper-catalyzed arylation of phosphonates with diaryliodonium salts [32]. Encouraged by this work, in the context of an electrophilic alkenylation of phosphonates, we reasoned that the action of a

Recent advances in photocatalyzed reactions using well-defined copper(I) complexes

• Mingbing Zhong,
• Xavier Pannecoucke,
• Philippe Jubault and
• Thomas Poisson

Beilstein J. Org. Chem. 2020, 16, 451–481, doi:10.3762/bjoc.16.42

• can deliver the product through a reductive elimination, along with the [Cu(I)] species in the ground state. 1.2 Reduction reactions In 2013, Fensterbank, Goddard, and Ollivier reported the use of the homoleptic complex [Cu(I)(dpp)2]PF6 for the reduction of symmetrical diaryliodonium salts (Scheme 8

• isolated in moderate to good yields. Using the more reactive allyl sulfone, a panel of symmetrical diaryliodonium salts was reacted, giving the products in good yields. The authors conducted some mechanistic studies and suggested a plausible catalytic cycle involving [Cu(I)]/[Cu(I)]*/[Cu(II)] species. The

• [Cu(I)(dpp)2]PF6 complex can be excited under visible light irradiation (530 nm), and the resulting excited [Cu(I)]* complex undergoes an SET to reduce the diaryliodonium species, providing the oxidized [Cu(II)] complex. The reduced diaryliodonium species collapses into an aryl radical and the

Thermal stability of N-heterocycle-stabilized iodanes – a systematic investigation

• Andreas Boelke,
• Yulia A. Vlasenko,
• Mekhman S. Yusubov,
• Boris J. Nachtsheim and
• Pavel S. Postnikov

Beilstein J. Org. Chem. 2019, 15, 2311–2318, doi:10.3762/bjoc.15.223

• analysis. Initially, the thermal decomposition of pseudocyclic diaryliodonium salts 18 and 19 was measured. For both salts, initial endothermic melting was followed by exothermal decomposition (Supporting Information File 1 and Figure 6). Compared to hydroxy(phenyl)-λ3-iodanes 1 and 2, the pseudocyclic

• diaryliodonium salts 18 and 19 show a significantly decreased ΔHdec from 72.9 kJ/mol to 10.2 kJ/mol for benziodoxolones 1 and 18 and from 116.3 kJ/mol to 23.4 kJ/mol for the triazole derivatives 2 and 19. The same trend of a higher thermal stability and lower ΔHdec for diaryliodonium salts compared the their

• hydroxy-substituted congeners can be observed for all other pseudocyclic N-heterocycle-substituted derivatives 20–29. Pyrazole 24 is the only exception. All investigated diaryliodonium salts can be defined as safe due to Tpeak values of usually above 180 °C and ΔHdec values of less than 50 kJ/mol. A

Recent advances in transition-metal-catalyzed incorporation of fluorine-containing groups

• Xiaowei Li,
• Xiaolin Shi,
• Xiangqian Li and
• Dayong Shi

Beilstein J. Org. Chem. 2019, 15, 2213–2270, doi:10.3762/bjoc.15.218

• ] presented the nucleophilic fluorination of diaryliodonium salts with KF through a Cu(I/III) catalytic cycle mechanism. This procedure preferentially fluorinates the smaller aromatic ligand on iodine(III). Also, the addition of Cu(OTf)2 and 18-crown-6 promoted the fluorination effectively. Finally, excellent

• , provides Cu(I)-F (B). Then, oxidation of Cu(I)-F (B) by the diaryliodonium reagent forms Cu(III)–aryl intermediate C. Subsequently, a reductive elimination of intermediate C provides a putative π-complex D, which then releases the desired aryl–F product and regenerates the CuI catalyst A. Subsequently, the

Multicomponent reactions (MCRs): a useful access to the synthesis of benzo-fused γ-lactams

• Edorta Martínez de Marigorta,
• Jesús M. de Los Santos,
• Ana M. Ochoa de Retana,
• Javier Vicario and
• Francisco Palacios

Beilstein J. Org. Chem. 2019, 15, 1065–1085, doi:10.3762/bjoc.15.104

• contributions aromatic aldehyde, imine or nitrile compounds have been used instead. For instance, 2-formylbenzonitriles 85 along with a variety of arenes 86 and diaryliodonium salts 87, combined in a copper-catalysed three-component cyclization produce 2,3-diarylisoindolinones 88 [103] (Scheme 25). The scope of

• the reaction is very wide, since the three components have demonstrated the ability to be efficient sources of diversity in this reaction. Indeed, 33 isoindolinones 88 were prepared with yields ranging from moderate to very good. Even when unsymmetrical diaryliodonium salts 87 were used, the reaction

• economy is quite low, since a half of the diaryliodonium salt 87 is lost in the process. Replacing the arene substrate 86 by ketones, and keeping nearly equal reaction conditions, the same authors have achieved an efficient synthesis of 3-(2-oxopropyl)- or pentacyclic isoindolinones 90 or 92 (Scheme 26

DFT calculations on the mechanism of copper-catalysed tandem arylation–cyclisation reactions of alkynes and diaryliodonium salts

• Tamás Károly Stenczel,
• Ádám Sinai,
• Zoltán Novák and
• András Stirling

Beilstein J. Org. Chem. 2018, 14, 1743–1749, doi:10.3762/bjoc.14.148

• explain our computational strategy and discuss the possible reaction paths leading to the formation of 5-(diphenylmethylene)-4,5-dihydrooxazole in the reaction of propargylic amides and diaryliodonium salts in the presence of a Cu(I) catalyst. This is a simplified model of the original reaction scheme [44

• –ring closure reaction of alkynyl substrates with diaryliodonium salts can be depicted as follows: first the Cu(III)–aryl electrophile forms an intermediate with the triple bond of the reactant, then the aryl moiety migrates to the activated triple bond which is followed by a fast ring-closing step. The

• stereoselectivity of the reaction and it also excludes the formation of vinyl-cation intermediates. The obtained results could serve as a useful and more general description of the mechanism of the carboarylation–ring closure strategy based on the utilisation of alkynes and diaryliodonium salts, beyond the selected

Hypervalent organoiodine compounds: from reagents to valuable building blocks in synthesis

• Gwendal Grelier,
• Benjamin Darses and
• Philippe Dauban

Beilstein J. Org. Chem. 2018, 14, 1508–1528, doi:10.3762/bjoc.14.128

• products 46 resulting from a 1,2-benzoyloxyiodination and isolated with moderate to excellent yields (Scheme 15). The reaction is believed to take place through the formation of a hypoiodous species that activates the olefin via an iodonium intermediate. Tandem catalytic couplings Diaryliodonium compounds

• and migratory addition into the proximal alkyne. Transmetalation of the vinylpalladium with the boronic acid and reductive elimination finally leads to alkylidenefluorenes 49. This multicomponent strategy allows the variation of the alkyne, the boronic acid and the diaryliodonium salts, but the use of

• derivatives. This relayed strategy can therefore be applied to non-symmetrical cyclic diaryliodonium species, thereby affording a library of functionalized benzoxazoles 58 with complete regiocontrol. The group of Zhang has developed a one-pot procedure for the sequential difunctionalization of cyclic diaryl

Metal-free formal synthesis of phenoxazine

• Gabriella Kervefors,
• Antonia Becker,
• Chandan Dey and
• Berit Olofsson

Beilstein J. Org. Chem. 2018, 14, 1491–1497, doi:10.3762/bjoc.14.126

• a high-yielding O-arylation of a phenol with an unsymmetrical diaryliodonium salt to provide an ortho-disubstituted diaryl ether. This species was cyclized to acetylphenoxazine in moderate yield. The overall yield in the three-step sequence is 72% based on recovered diaryl ether. An interesting

• , unusually stable iodine(III) intermediate in the O-arylation was observed by NMR and could be converted to the product upon longer reaction time. Keywords: arylation; cyclization; diaryl ether; diaryliodonium salt; phenol; Introduction Phenoxazine (1) is a tricyclic compound consisting of an oxazine ring

• -arylations of phenols using diaryliodonium salts [23][24][25], which are reactive electrophilic arylation reagents [26][27][28]. As diaryliodonium salts can be easily synthesized in a one-pot manner [28], we envisioned that phenoxazines could be obtained in a straightforward and efficient manner from

Atom-economical group-transfer reactions with hypervalent iodine compounds

• Andreas Boelke,
• Peter Finkbeiner and
• Boris J. Nachtsheim

Beilstein J. Org. Chem. 2018, 14, 1263–1280, doi:10.3762/bjoc.14.108

• partner) are taken into account. Other additives, such as additional bases, acids or catalysts were neglected. Review 1. Diaryliodonium salts 1.1. Acyclic diaryliodonium salts Acyclic diaryliodonium salts 1 find widespread application in numerous metal-free and transition metal-mediated electrophilic

• waste. Examples for their atom-economical utilization, in which at least both aryl ligands are transferred, are still rare. A general approach would involve at first a metal-catalysed or metal-free arylation step of a suitable substrate A with the diaryliodonium salt 1 to give monoarylated intermediate

• ]. Here, symmetrical diaryliodonium salts 1 were used in a palladium-catalysed cross-coupling reaction with sodium tetraphenylborate (Scheme 3). This reaction not only provides excellent yields of the respective biphenyls 3 but also exhibits a high AE (57% for Ar = Ph). However, its general synthetic

A survey of chiral hypervalent iodine reagents in asymmetric synthesis

• Soumen Ghosh,
• Suman Pradhan and
• Indranil Chatterjee

Beilstein J. Org. Chem. 2018, 14, 1244–1262, doi:10.3762/bjoc.14.107

• for carbonyl α-functionalizations are still considered as highly demandable in synthetic organic chemistry. In this regard transition metals have been successfully applied and even allow accomplishing such transformations asymmetrically. On the other hand, diaryliodonium salts are known to transfer

• aryl groups ultimately leading to α-arylated products. This part of the review focuses on the development of α-functionalization strategies based on chiral diaryliodonium reagents having either an axially chiral backbone or that can be considered analogous to the C2-symmetric iodoarene moiety. For this

• reactive organostannane derived Sn–I(III) exchange in the presence of BF3·Et2O was the crucial step in the synthesis of the chiral iodonium salts from 88. In view of developing asymmetric α-arylations of carbonyls, Olofsson et al. has independently synthesized a new class of diaryliodonium salts 14 with

Hypervalent iodine-guided electrophilic substitution: para-selective substitution across aryl iodonium compounds with benzyl groups

• Cyrus Mowdawalla,
• Faiz Ahmed,
• Tian Li,
• Kiet Pham,
• Loma Dave,
• Grace Kim and
• I. F. Dempsey Hyatt

Beilstein J. Org. Chem. 2018, 14, 1039–1045, doi:10.3762/bjoc.14.91

• -withdrawing groups could also explain how the carbonyl of the cyclic iodonium (3) caused that specific reagent to fail (Table 1, entries 6 and 7). Several para-substituted I(III) reactants were attempted but all led to complex mixtures with the exception of the diaryliodonium triflate 2d (Table 2, entry 3

Imide arylation with aryl(TMP)iodonium tosylates

• Souradeep Basu,
• Alexander H. Sandtorv and
• David R. Stuart

Beilstein J. Org. Chem. 2018, 14, 1034–1038, doi:10.3762/bjoc.14.90

• -deficient and sterically encumbered aryl groups. Keywords: arylation; C–N coupling; diaryliodonium; hypercoordinate iodine; metal-free; Introduction Imides are important structural units in a range of approved pharmaceuticals and agrochemicals (Scheme 1a) [1]. Despite the general prevalence of imides, N

• , transition metals feature prominently in such methods, but even recent examples employ stoichiometric metal mediators [4]. Metal-free methods by classic SNAr are also attractive, but only possible on very electron-deficient arene substrates [5]. Diaryliodonium salts are useful reagents for metal-free aryl

• Discussion We initiated our optimization of the arylation of the potassium phthalimide nucleophile with diaryliodonium electrophiles by surveying several reaction conditions: dummy ligand (Aux), counter anion, solvent and volume, reaction temperature, and stoichiometry (Table 1). Consistent with an

One-pot synthesis of diaryliodonium salts from arenes and aryl iodides with Oxone–sulfuric acid

• Natalia Soldatova,
• Pavel Postnikov,
• Olga Kukurina,
• Viktor V. Zhdankin,
• Akira Yoshimura,
• Thomas Wirth and
• Mekhman S. Yusubov

Beilstein J. Org. Chem. 2018, 14, 849–855, doi:10.3762/bjoc.14.70

• , Park Place, Main Building, Cardiff CF10 3AT, UK 10.3762/bjoc.14.70 Abstract A facile synthesis of diaryliodonium salts utilizing Oxone as versatile and cheap oxidant has been developed. This method shows wide applicability and can be used for the preparation of iodonium salts containing electron

• -donating or electron-withdrawing groups in good yields. In addition, this procedure can be applied to the preparation of symmetric iodonium salts directly from arenes via a one-pot iodination–oxidation sequence. Keywords: diaryliodonium salts; iodine; iodonium; oxidation; Oxone; Introduction

• Diaryliodonium salts, which are also known as diaryl-λ3-iodanes, are widely considered to be an important and practically useful class of hypervalent iodine compounds [1][2][3][4]. Diaryliodonium salts have found broad synthetic application as electrophilic arylating reagents in reactions with various