Mechanochemical bottom-up synthesis of phosphorus-linked, heptazine-based carbon nitrides using sodium phosphide

• Blaine G. Fiss,
• Georgia Douglas,
• Michael Ferguson,
• Jorge Becerra,
• Jesus Valdez,
• Trong-On Do,
• Tomislav Friščić and
• Audrey Moores

Beilstein J. Org. Chem. 2022, 18, 1203–1209, doi:10.3762/bjoc.18.125

• minimize the bandgap of these metal-free photocatalysts, as well as improve their overall stability. Traditional routes to incorporate phosphorus have relied on high-temperature [7] or microwave [8] syntheses, and often proceed through the introduction of a phosphorus atom within the heptazine ring, which

Derivatives of benzo-1,4-thiazine-3-carboxylic acid and the corresponding amino acid conjugates

• Péter Kisszékelyi,
• Tibor Peňaška,
• Klára Stankovianska,
• Mária Mečiarová and
• Radovan Šebesta

Beilstein J. Org. Chem. 2022, 18, 1195–1202, doi:10.3762/bjoc.18.124

• 1,3-dicarbonyl compounds using a catalytic amount of hydrazine hydrate without solvent in a short reaction time (10 min) [14]. Reactions of 2-aminothiophenols with β-keto esters and β-diketones under microwave irradiation (MWI) using basic alumina as heterogeneous catalyst without solvent afforded 4H

Introducing a new 7-ring fused diindenone-dithieno[3,2-b:2',3'-d]thiophene unit as a promising component for organic semiconductor materials

• Valentin H. K. Fell,
• Joseph Cameron,
• Alexander L. Kanibolotsky,
• Eman J. Hussien and
• Peter J. Skabara

Beilstein J. Org. Chem. 2022, 18, 944–955, doi:10.3762/bjoc.18.94

• very sensitive to changes in concentration, equivalents, amounts of reagents, and temperature. Running the reaction under anhydrous conditions, either conventionally [45] or in the microwave [46] did not improve the outcome. The optimised reaction and purification parameters can be found in Supporting

Synthesis of odorants in flow and their applications in perfumery

• Merlin Kleoff,
• Paul Kiler and
• Philipp Heretsch

Beilstein J. Org. Chem. 2022, 18, 754–768, doi:10.3762/bjoc.18.76

• first developed on small scale under microwave batch conditions to reach short reaction times of 1–10 min and subsequently translated to scalable flow processes [24]. While raspberries have a fruity and “berry” scent which is typically associated with the color red, the scent of citrus fruits is placed

Inductive heating and flow chemistry – a perfect synergy of emerging enabling technologies

• Conrad Kuhwald,
• Sibel Türkhan and
• Andreas Kirschning

Beilstein J. Org. Chem. 2022, 18, 688–706, doi:10.3762/bjoc.18.70

• synthesis; nanoparticles; Introduction Several decades ago, inductive heating was introduced as an indirect technique in various applications, including industrial manufacturing, synthetic chemistry [1][2][3], and medicine (Figure 1) [4][5][6][7]. Compared to microwave heating [8][9], the other major

• convection across a surface. Compared to heating under microwave irradiation, the system does not need to be encased for safety reasons. Inductive heating of materials is extremely fast with the best determined power transfer value of all heating technologies [10]. It has therefore found wide industrial

• mesoflow technology and indirect heating 3.1 Microwave-accelerated reactions under flow conditions Reactions that take 20 minutes or longer under classical batch conditions can be accelerated considerably under continuous flow conditions by rapid heating, because flow chemistry usually involves the use of

Synthesis of sulfur karrikin bioisosteres as potential neuroprotectives

• Martin Pošta,
• Václav Zima,
• Lenka Poštová Slavětínská,
• Marika Matoušová and
• Petr Beier

Beilstein J. Org. Chem. 2022, 18, 549–554, doi:10.3762/bjoc.18.57

• (14), respectively, following a published procedure [21][23], while karrikin KAR2 (2) was synthesized from ᴅ-xylose [24]. The conversion of karrikins 1–4 to the corresponding C2 thiones 9–12 was accomplished using microwave-assisted heating with Lawesson’s reagent and hexamethyldisiloxane (HMDO

• ][31], microwave heating did not improve the yields; therefore, conventional heating was used in our case. Generally, 5 is the most reactive among the substrates and the experiments proved that only 5 and not 13 or 14 can be partially converted to thiopyranthione 6b in the presence of P4S10 without

• derivatives 27–30 were prepared from 8, 20, 21, and 26 using microwave heating with Lawesson’s reagent and HMDO (Scheme 6). Thionation provided the title compounds in good to high yields. Biochemical study – AchE inhibition The compounds were further tested for their ability to inhibit AChE in vitro [24

Menadione: a platform and a target to valuable compounds synthesis

• Acácio S. de Souza,
• Ruan Carlos B. Ribeiro,
• Dora C. S. Costa,
• Fernanda P. Pauli,
• David R. Pinho,
• Matheus G. de Moraes,
• Fernando de C. da Silva,
• Luana da S. M. Forezi and
• Vitor F. Ferreira

Beilstein J. Org. Chem. 2022, 18, 381–419, doi:10.3762/bjoc.18.43

Synthesis of 5-unsubstituted dihydropyrimidinone-4-carboxylates from deep eutectic mixtures

• Sangram Gore,
• Sundarababu Baskaran and
• Burkhard König

Beilstein J. Org. Chem. 2022, 18, 331–336, doi:10.3762/bjoc.18.37

• -unsubstituted 3,4-dihydropyrimidinone-4-carboxylate derivatives by employing oxalacetic acid as a β-ketoester equivalent in the presence of TFA via a Biginelli reaction [23]. Lam and Fang reported the same synthesis under microwave conditions [24]. Very recently, Kambappa and co-workers reported a one-pot

Recent developments and trends in the iron- and cobalt-catalyzed Sonogashira reactions

• Surendran Amrutha,
• Sankaran Radhika and
• Gopinathan Anilkumar

Beilstein J. Org. Chem. 2022, 18, 262–285, doi:10.3762/bjoc.18.31

• model reaction without any external ligand and required 20 h for completion. However, the same reaction under microwave irradiation was complete within 2.5 h. The product was obtained with an excellent yield of 95% by the utilization of Fe(III) acetylacetonate and CuI as the catalyst. Among several iron

• systems utilizing an iron catalyst under microwave irradiation has been reported [34]. N-Arylated azaindoles were prepared by Sonogashira coupling followed by cyclization. The Sonogashira coupling of 2-arylamino-3-iodopyridines with terminal acetylenes followed by cyclization afforded the 2-N-arylated 7

• -azaindole derivatives under microwave irradiation that helps to reduce the reaction time and minimizes side product formation. Co-catalyzed Sonogashira cross-coupling reactions Nanoparticle-based protocols The advantages of using immobilized catalysts include the possibility of the catalyst to be easily

Synthesis of novel [1,2,4]triazolo[1,5-b][1,2,4,5]tetrazines and investigation of their fungistatic activity

• Anna V. Korotina,
• Svetlana G. Tolshchina,
• Rashida I. Ishmetova,
• Natalya P. Evstigneeva,
• Natalya A. Gerasimova,
• Natalya V. Zilberberg,
• Nikolay V. Kungurov,
• Gennady L. Rusinov,
• Oleg N. Chupakhin and
• Valery N. Charushin

Beilstein J. Org. Chem. 2022, 18, 243–250, doi:10.3762/bjoc.18.29

• can also be used as an oxidant for the oxidation of benzamidine derivatives 2b,c in acetonitrile under microwave irradiation. Along with the cyclization reaction, bromination of the pyrazole ring proved to occur at position C(4) to give the products 3j,k, as evidenced by disappearance of the

• formation of difficult-to-separate reaction mixtures with a low content of the target products 3a,b,g, which could not be isolated in a pure form. Heating of tetrazines 2 with N-bromosuccinimide in refluxing acetonitrile without microwave irradiation made it possible to obtain the product 3j in a low yield

Efficient synthesis of ethyl 2-(oxazolin-2-yl)alkanoates via ethoxycarbonylketene-induced electrophilic ring expansion of aziridines

• Yelong Lei and
• Jiaxi Xu

Beilstein J. Org. Chem. 2022, 18, 70–76, doi:10.3762/bjoc.18.6

• alkoxycarbonylketenes, which undergo an electrophilic ring expansion with aziridines to afford alkyl 2-(oxazolin-2-yl)alkanoates in good to excellent yields under microwave heating. The method is a convenient and clean reaction without any activators and catalysts and can be also applied in the synthesis of 2-(oxazolin

• microwave heating, affording the desired product 3aa in 41% yield with remaining starting materials 1a and 2a (Table 1, entry 1). The reaction was further conducted at elevated temperatures 120 °C, 130 °C, and 140 °C, giving the product 3aa in 64%, 68%, and 70%, respectively (Table 1, entries 2–4). Similar

• solubility to all substrates than toluene, the optimal reaction conditions were selected as: diazo ester 1a (0.36 mmol) and 2a (0.3 mmol) in DCE (1 mL) were heated at 130 °C for 20 min with microwave heating. With the optimal reaction conditions in hand, we evaluated the scopes and generalities of both diazo

Recent advances and perspectives in ruthenium-catalyzed cyanation reactions

• Thaipparambil Aneeja,
• Cheriya Mukkolakkal Abdulla Afsina,
• Padinjare Veetil Saranya and
• Gopinathan Anilkumar

Beilstein J. Org. Chem. 2022, 18, 37–52, doi:10.3762/bjoc.18.4

• and earth abundant characteristics. Moreover, much greener methodologies like microwave-assisted cyanation reactions also received much attention in recent times [21]. The cyanation can be carried out using electrophilic and nucleophilic cyanating agents [22]. Usually a cyanation is accomplished via

Peptide stapling by late-stage Suzuki–Miyaura cross-coupling

• Hendrik Gruß,
• Rebecca C. Feiner,
• Ridhiwan Mseya,
• David C. Schröder,
• Michał Jewgiński,
• Kristian M. Müller,
• Rafał Latajka,
• Antoine Marion and
• Norbert Sewald

Beilstein J. Org. Chem. 2022, 18, 1–12, doi:10.3762/bjoc.18.1

• Pd source together with the water-soluble Buchwald ligand sulfonated SPhos (sSPhos) and potassium fluoride as a base. The reaction was performed in a solvent mixture of dimethoxyethane, ethanol and water (DME/EtOH/H2O 9:9:2) at 120 °C under microwave irradiation for 30 min (Scheme 1) [78]. The

Efficient N-arylation of 4-chloroquinazolines en route to novel 4-anilinoquinazolines as potential anticancer agents

• Rodolfo H. V. Nishimura,
• Thiago dos Santos,
• Valter E. Murie,
• Luciana C. Furtado,
• Leticia V. Costa-Lotufo and
• Giuliano C. Clososki

Beilstein J. Org. Chem. 2021, 17, 2968–2975, doi:10.3762/bjoc.17.206

• . Lineu Prestes 1524, 05508-900 São Paulo-SP, Brazil 10.3762/bjoc.17.206 Abstract Microwave-mediated N-arylation of 4-chloroquinazolines in THF/H2O rapidly and efficiently afforded a library of novel 6-halo-2-phenyl-substituted 4-anilinoquinazolines. The methodology was compatible with numerous ortho

• -anilinoquinazoline; anticancer agents; N-arylation; 4-chloroquinazoline; microwave irradiation; Introduction N-Heterocyclic compounds are commonly present in pharmaceuticals, bioactive natural products, agrochemicals, and synthetic drugs [1][2]. Quinazoline, a benzo-fused N-heterocyclic framework (benzo-1,3-diazine

• ]. These limitations can be overcome by using microwave irradiation [12][13][18][19][20], which promotes fast and efficient anilination reactions when a wide range of anilines bearing both electron-donating and electron-withdrawing groups are employed as nucleophiles (Scheme 1b) [12][13]. Moreover, 4

Selective sulfonylation and isonitrilation of para-quinone methides employing TosMIC as a source of sulfonyl group or isonitrile group

• Chuanhua Qu,
• Run Huang,
• Yong Li,
• Tong Liu,
• Yuan Chen and
• Guiting Song

Beilstein J. Org. Chem. 2021, 17, 2822–2831, doi:10.3762/bjoc.17.193

• treated with 20 mol % Ag2CO3 in THF in the presence of Cs2CO3 at 90 °C under microwave irradiation for 10 min, fortunately, the sulfonylated diarylmethane product 3a was isolated in 36% yield (Table 1, entry 2). When ZnI2 or Cu(OAc)2 was used instead of Ag2CO3, we found that the yield of 3a catalyzed by

• the reaction mixture was heated under microwave irradiation at 90 °C for 10 min and monitored by TLC until starting material was consumed. Then, the reaction mixture was concentrated under reduced pressure followed by column chromatography over silica gel using petroleum/EtOAc (0 to 10%) as eluent to

The PIFA-initiated oxidative cyclization of 2-(3-butenyl)quinazolin-4(3H)-ones – an efficient approach to 1-(hydroxymethyl)-2,3-dihydropyrrolo[1,2-a]quinazolin-5(1H)-ones

• Alla I. Vaskevych,
• Nataliia O. Savinchuk,
• Ruslan I. Vaskevych,
• Eduard B. Rusanov,
• Oleksandr O. Grygorenko and
• Mykhailo V. Vovk

Beilstein J. Org. Chem. 2021, 17, 2787–2794, doi:10.3762/bjoc.17.189

• unsaturated moieties. The known literature exceptions included synthesis of 2-alkynylquinazolines via acylation of anthranilamides with alkynylcarboxylic acids and further cyclocondensation under alkaline conditions [36], as well as formation of 2-alkenyl counterparts by a one-pot Yb(OTf)3-catalyzed microwave

Synthesis of new bile acid-fused tetrazoles using the Schmidt reaction

• Dušan Đ. Škorić,
• Olivera R. Klisurić,
• Dimitar S. Jakimov,
• Marija N. Sakač and
• János J. Csanádi

Beilstein J. Org. Chem. 2021, 17, 2611–2620, doi:10.3762/bjoc.17.174

• selective acetylation [43], followed by oxidation. Enones 4 and 8 were prepared by dehydrogenation of corresponding ketones with SeO2 in refluxing acetic acid [44]. Microwave-assisted heating of the reaction mixture in a closed vessel (150 °C) helped in decreasing the reaction time for dehydrogenation

• acid, reflux, 12 h (74% for 4; 69% for 8); d) SeO2, acetic acid, microwave irradiation, 150 °C, 15 min (74% for 4; 67% for 8); and e) Ac2O, benzene/pyridine, rt, 24 h (74%). Synthesis of 7-oxo intermediate 11 from chenodeoxycholic acid (9). Reagents and conditions: a) EtOAc, pTsOH, reflux, 12 h (66

Silica gel and microwave-promoted synthesis of dihydropyrrolizines and tetrahydroindolizines from enaminones

• Robin Klintworth,
• Garreth L. Morgans,
• Stefania M. Scalzullo,
• Charles B. de Koning,
• Willem A. L. van Otterlo and
• Joseph P. Michael

Beilstein J. Org. Chem. 2021, 17, 2543–2552, doi:10.3762/bjoc.17.170

• , underwent cyclization in the presence of silica gel to give ethyl 6-(hetero)aryl-2,3-dihydro-1H-pyrrolizine-5-carboxylates within minutes upon microwave heating in xylene at 150 °C. Instead of functioning as a nucleophile, the enaminone acted as an electrophile at its carbonyl group during the cyclization

• . Yields of the bicyclic products were generally above 75%. The analogous microwave-assisted reaction to produce ethyl 2-aryl-5,6,7,8-tetrahydroindolizine-3-carboxylates from (E)-ethyl 2-[2-(2-oxo-2-arylethylidene)piperidin-1-yl]acetates failed in nonpolar solvents, but occurred in ethanol at lower

• temperature and microwave power, although requiring much longer time. A possible mechanism for the cyclization is presented, and further functionalization of the newly created pyrrole ring in the dihydropyrrolizine core is described. Keywords: dihydropyrrolizines; enaminones; microwaves; silica gel

(Phenylamino)pyrimidine-1,2,3-triazole derivatives as analogs of imatinib: searching for novel compounds against chronic myeloid leukemia

• Luiz Claudio Ferreira Pimentel,
• Lucas Villas Boas Hoelz,
• Henayle Fernandes Canzian,
• Frederico Silva Castelo Branco,
• Andressa Paula de Oliveira,
• Vinicius Rangel Campos,
• Floriano Paes Silva Júnior,
• Rafael Ferreira Dantas,
• Jackson Antônio Lamounier Camargos Resende,
• Anna Claudia Cunha,
• Nubia Boechat and
• Mônica Macedo Bastos

Beilstein J. Org. Chem. 2021, 17, 2260–2269, doi:10.3762/bjoc.17.144

• )pyrimidine-pyridine (PAPP) group as a pharmacophoric fragment, and these compounds were biologically evaluated. The synthesis of twelve new compounds was performed in three steps and assisted by microwave irradiation in a 1,3-dipolar cycloaddition to obtain 1,2,3-triazole derivatives substituted on carbon C

• cycloaddition reactions via the copper-catalyzed 1,3-dipolar cycloaddition reaction (CuAAC) of the azides 5 and 9 with suitably functionalized acetylenes 6a–j, using sodium ascorbate and copper sulfate in ACN/H2O 2:1 under microwave irradiation were carried out to obtain the 1,4-regioisomers of the final

Recent advances in the syntheses of anthracene derivatives

• Giovanni S. Baviera and
• Paulo M. Donate

Beilstein J. Org. Chem. 2021, 17, 2028–2050, doi:10.3762/bjoc.17.131

• ]. The direct synthesis of anthracene derivatives is rare and most methods usually involve more than one reaction step. For example, in 2008, Deiters and co-workers described an efficient two-step route to prepare substituted anthracenes and azaanthracenes via microwave-assisted [2 + 2 + 2

• expected products [76]. Sun and co-workers modified the method proposed by Singh. In 2011, they reported a method that employed molecular iodine as the catalyst, under microwave radiation as heat source, and obtained tetrahydrobenzo[a]xanthene-11-one and diazabenzo[a]anthracene-9,11-dione derivatives in

• good to excellent yields (70–94%) [77]. Then, in 2012, Sun and co-workers reported another method employing molecular iodine as catalyst under reflux with acetic acid instead of microwave radiation and also obtained good yields (66–89%) [78]. Because the three methodologies provided good yields, the

Synthesis of 1-indolyl-3,5,8-substituted γ-carbolines: one-pot solvent-free protocol and biological evaluation

• Premansh Dudhe,
• Mena Asha Krishnan,
• Kratika Yadav,
• Diptendu Roy,
• Krishnan Venkatasubbaiah,
• Biswarup Pathak and
• Venkatesh Chelvam

Beilstein J. Org. Chem. 2021, 17, 1453–1463, doi:10.3762/bjoc.17.101

• decomposition of N-pyridylbenzotriazoles. Later, the reaction conditions were modified to make this reaction more versatile and operationally simple such as by the use of microwave irradiation [12]. Meanwhile, the Fischer indole synthesis was successfully extended for the synthesis of significant biologically

Double-headed nucleosides: Synthesis and applications

• Vineet Verma,
• Jyotirmoy Maity,
• Vipin K. Maikhuri,
• Ritika Sharma,
• Himal K. Ganguly and
• Ashok K. Prasad

Beilstein J. Org. Chem. 2021, 17, 1392–1439, doi:10.3762/bjoc.17.98

• alkyne 155 was reacted with bromobenzene and sodium azide under microwave heating in an EtOH/H2O mixture in the presence of copper iodide, sodium ascorbate, and N,N-dimethylethylenediamine (156) to afford the double-headed nucleoside 157a. The reaction of the terminal alkyne 155 with benzyl bromide and

A comprehensive review of flow chemistry techniques tailored to the flavours and fragrances industries

• Guido Gambacorta,
• James S. Sharley and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2021, 17, 1181–1312, doi:10.3762/bjoc.17.90

• stimulation by application of variable temperature zones, light or microwave irradiation, electrolysis and even high frequency sonication. The ability to quickly and easily assemble and modify a flow setup allows not only the chemical reaction to be performed as a continuous dynamic flow process but also for

Heterogeneous photocatalytic cyanomethylarylation of alkenes with acetonitrile: synthesis of diverse nitrogenous heterocyclic compounds

• Guanglong Pan,
• Qian Yang,
• Wentao Wang,
• Yurong Tang and
• Yunfei Cai

Beilstein J. Org. Chem. 2021, 17, 1171–1180, doi:10.3762/bjoc.17.89

• microwave stimulations [18][19][20][21][22][23][24][25][26]. Recently, visible light photoredox catalysis has emerged as a powerful and environment-friendly method in organic synthesis by activating organic molecules under mild reaction conditions [27][28]. In this context, the Li and Cai groups

N-tert-Butanesulfinyl imines in the asymmetric synthesis of nitrogen-containing heterocycles

• Joseane A. Mendes,
• Paulo R. R. Costa,
• Miguel Yus,
• Francisco Foubelo and
• Camilla D. Buarque

Beilstein J. Org. Chem. 2021, 17, 1096–1140, doi:10.3762/bjoc.17.86

• was the only effective reagent when performing the reaction at 60 °C in THF [16]. Ketimines were also synthesized with Ti(OEt)4, under microwave irradiation in a solvent-free system [20]. In hindered ketones, Ti(OiPr)4 or Ti(OEt)4 using vacuum or under a nitrogen flow were effective to tert