A new approach to silicon rhodamines by Suzuki–Miyaura coupling – scope and limitations

• Thines Kanagasundaram,
• Antje Timmermann,
• Carsten S. Kramer and
• Klaus Kopka

Beilstein J. Org. Chem. 2019, 15, 2569–2576, doi:10.3762/bjoc.15.250

• be an effective catalyst for the synthesis of rhodamine and rosamine dyes as well as for their selenium or tellurium analogous [29], the usage of that Pd(0) catalyst showed yields comparable with those obtained with PdCl2(PPh3)2 (Table 1, entry 4). The exchange of sodium carbonate with cesium

Chiral terpene auxiliaries V: Synthesis of new chiral γ-hydroxyphosphine oxides derived from α-pinene

• Anna Kmieciak and
• Marek P. Krzemiński

Beilstein J. Org. Chem. 2019, 15, 2493–2499, doi:10.3762/bjoc.15.242

• selenium dioxide in methanol [28]. The obtained phenyl selenide 14 was oxidized with hydrogen peroxide in the presence of pyridine to selenoxide, which readily undergoes intramolecular syn-elimination to produce α,β-unsaturated (+)-apoverbenone (15) [28][29]. In the next step, Luche reduction of 15

Harnessing enzyme plasticity for the synthesis of oxygenated sesquiterpenoids

• Melodi Demiray,
• David J. Miller and
• Rudolf K. Allemann

Beilstein J. Org. Chem. 2019, 15, 2184–2190, doi:10.3762/bjoc.15.215

• the same manner, beginning with a tetrahydropyranyl (THP) protection of (E,E)-farnesol to form 13 [29][30]. This was followed by a selenium dioxide oxidation that produced 12-hydroxyfarnesol (14) as the major product (48%, already published in [29]) in addition to 8-hydroxyfarnesol (15, 11%) [31

1,2,3-Triazolium macrocycles in supramolecular chemistry

• Mastaneh Safarnejad Shad,
• Pulikkal Veettil Santhini and
• Wim Dehaen

Beilstein J. Org. Chem. 2019, 15, 2142–2155, doi:10.3762/bjoc.15.211

• (iodine, bromine) and chalcogens (selenium and tellurium) [18]. While there are several strategies for the synthesis of triazoles, the Cu(II)-catalyzed azide–alkyne cycloaddition reaction (CuAAC click reaction) is considered as one of the most efficient, simple and mild approaches towards the preparation

Synthesis of benzo[d]imidazo[2,1-b]benzoselenoazoles: Cs₂CO₃-mediated cyclization of 1-(2-bromoaryl)benzimidazoles with selenium

• Mio Matsumura,
• Yuki Kitamura,
• Arisa Yamauchi,
• Yoshitaka Kanazawa,
• Yuki Murata,
• Tadashi Hyodo,
• Kentaro Yamaguchi and
• Shuji Yasuike

Beilstein J. Org. Chem. 2019, 15, 2029–2035, doi:10.3762/bjoc.15.199

• . Keywords: benzimidazole; cesium carbonate; cyclization; selenium; selenoazole; Introduction Selenium-containing heterocyclic ring systems have attracted attention not only because of their chemical properties and reactivities, but also for their wide biological activities [1][2][3][4]. For example

• have been reported so far (Scheme 1). Zeni et al. reported the synthesis of imidazoselenoazole using a three-step one-pot reaction of N-alkynylimidazoles with selenium involving the electrophilic intramolecular cyclization of acetylenic compounds (Scheme 1, reaction 1) [6]. Zeni et al. also developed a

• constructing tetracyclic aromatic heterocycles containing selenium. For example, the reaction of 2-(2-iodophenyl)indoles with selenium powder in the presence of CuO as catalyst resulted in benzoselenopheno[3,2-b]indole derivatives [14]. The reaction of 2-(2-haloaryl)imidazo[1,2-a]pyridines with selenium using

A novel three-component reaction between isocyanides, alcohols or thiols and elemental sulfur: a mild, catalyst-free approach towards O-thiocarbamates and dithiocarbamates

• András György Németh,
• György Miklós Keserű and
• Péter Ábrányi-Balogh

Beilstein J. Org. Chem. 2019, 15, 1523–1533, doi:10.3762/bjoc.15.155

• isocyanides and sulfur [76] can be enhanced using various catalysts such as selenium, molybdenum, copper, rhodium [77][78][79][80][81][82] or tellurium [83] providing the isothiocyanates in excellent yields. These approaches on the other hand suffer from the use of heavy metals, toxic chalcogens and/or long

Selenophene-containing heterotriacenes by a C–Se coupling/cyclization reaction

• Pierre-Olivier Schwartz,
• Sebastian Förtsch,
• Astrid Vogt,
• Elena Mena-Osteritz and
• Peter Bäuerle

Beilstein J. Org. Chem. 2019, 15, 1379–1393, doi:10.3762/bjoc.15.138

• -Wolff-Straße 13, 29699 Bomlitz, Germany 10.3762/bjoc.15.138 Abstract A new novel family of tricyclic sulfur and/or selenium-containing heterotriacenes 2–4 with an increasing number of selenium (Se) atoms is presented. The heterotriacene derivatives were synthesized in multistep synthetic routes and the

• investigated and successfully used as building blocks for high-performance organic electronic materials and devices [9][10][11][12][13][14][15][16]. Among the different heteroatoms that can be introduced into heteroacenes and in contrast to corresponding thiophene-based systems, selenium (Se) has only

• heteroacenes via trimethylsilyl (TMS)-substituted selenolotriacenes, which served as intermediate building blocks [27]. In continuation of our work on heteroacenes, we now report synthesis and characterization of fused tricyclic selenium or selenophene-containing heteroacenes 2–4, which represent the so far

The LANCA three-component reaction to highly substituted β-ketoenamides – versatile intermediates for the synthesis of functionalized pyridine, pyrimidine, oxazole and quinoxaline derivatives

• Tilman Lechel,
• Roopender Kumar,
• Mrinal K. Bera,
• Reinhold Zimmer and
• Hans-Ulrich Reissig

Beilstein J. Org. Chem. 2019, 15, 655–678, doi:10.3762/bjoc.15.61

• derivatives PM allows a variety of subsequent transformations to new derivatives. The C-4 methyl (in one case benzyl) group is an inevitable structural feature of these pyrimidines, but it can smoothly be used for oxidation reactions to introduce new functional groups. As typical examples selenium dioxide

• reasonable overall yields (Scheme 20) [30]. This pathway via the pyrimidine N-oxides represents a good alternative to the direct oxidation of the 4-methyl group by selenium dioxide (see Scheme 11). The subsequent transformation of the aldehyde PM71 to the oxime followed by dehydration afforded nitrile PM72

• of pyrimidine derivatives PM through selenium dioxide oxidations of PM5, PM9, PM15 and PM19 leading to 4-formyl-substituted pyrimidines PM41, PM42, PM44 and PM48 and selected subsequent transformations (TosMIC = tosylmethyl isocyanide). Conversion of 2-vinyl-substituted pyrimidine PM7 into aldehyde

Oxidative radical ring-opening/cyclization of cyclopropane derivatives

• Yu Liu,
• Qiao-Lin Wang,
• Zan Chen,
• Cong-Shan Zhou,
• Bi-Quan Xiong,
• Pan-Liang Zhang,
• Chang-An Yang and
• Quan Zhou

Beilstein J. Org. Chem. 2019, 15, 256–278, doi:10.3762/bjoc.15.23

• diphenyl diselenides 12 for the synthesis of 2-phenylseleny-3,3-diarylcyclobutenes 13 under visible light irradiation (Scheme 5) [51]. The desired products 13 contained a cyclobutene group and a selenium atom, which makes the products possess unique biological and pharmaceutical activities. The mechanism

• synthesis of 1-naphthaldehydes 25 under mild conditions via a radical-mediated ring-opening and intramolecular cyclization of MCPs 23 with organic selenium reagents 24 (Scheme 8) [59]. In this reaction, the MCPs with electron-withdrawing groups gave lower yields than that with electron-donating groups

• diethyl phosphites. Organic-selenium induced radical ring-opening and cyclization of MCPs derivatives (cyclopropylaldehydes). Copper(I)-catalyzed oxidative radical trifluoromethylation/ring-opening/cyclization of MCPs with Togni reagent II. Ag(I)-mediated trifluoromethylthiolation/ring-opening/cyclization

Molecular iodine-catalyzed one-pot multicomponent synthesis of 5-amino-4-(arylselanyl)-1H-pyrazoles

• Camila S. Pires,
• Daniela H. de Oliveira,
• Maria R. B. Pontel,
• Jean C. Kazmierczak,
• Roberta Cargnelutti,
• Diego Alves,
• Raquel G. Jacob and
• Ricardo F. Schumacher

Beilstein J. Org. Chem. 2018, 14, 2789–2798, doi:10.3762/bjoc.14.256

• -(phenylselanyl)-1H-pyrazol-5-amine was submitted to an oxidative dehydrogenative coupling to produce a diazo compound confirmed by X-ray analysis. Keywords: diaryl diselenide; diazo compound; 1H-pyrazole; molecular iodine; multicomponent reaction; Introduction Selenium-containing compounds are of great

• β-ketonitriles, arylhydrazines and aryl sulfonyl hydrazides as sulfur source [21]. The chemistry of iodine-catalyzed transformations has emerged as a greener, efficient and economical alternative to transition metals in organic synthesis [22][23][24]. However, the synthesis of selenium-containing 5

• Lewis acid to generate the hydrazone intermediate A. Then, hydrazone A undergoes a cyclization reaction followed by an oxidative aromatization to yield 1H-pyrazol-5-amine 5. At the same time, the diaryl diselenide 3 reacts with the molecular iodine to generate an electrophilic selenium species B. The

Unprecedented nucleophile-promoted 1,7-S or Se shift reactions under Pummerer reaction conditions of 4-alkenyl-3-sulfinylmethylpyrroles

• Takashi Go,
• Akane Morimatsu,
• Hiroaki Wasada,
• Genzoh Tanabe,
• Osamu Muraoka,
• Yoshiharu Sawada and
• Mitsuhiro Yoshimatsu

Beilstein J. Org. Chem. 2018, 14, 2722–2729, doi:10.3762/bjoc.14.250

• under Pummerer reaction conditions of sulfoxides and the results are shown in Scheme 3. We first examined the following one-pot sequential reactions of the selenium analog: the mCPBA oxidation of N-allylpyrrolomethylselenide 6a, the following Pummerer reaction, and final treatment with TBAH. The

A novel and practical asymmetric synthesis of eptazocine hydrobromide

• Ruipeng Li,
• Zhenren Liu,
• Liang Chen,
• Jing Pan,
• Kuaile Lin and
• Weicheng Zhou

Beilstein J. Org. Chem. 2018, 14, 2340–2347, doi:10.3762/bjoc.14.209

• , entry 3). When other oxidants, such as selenium oxide and manganese dioxide, were used, even at reflux temperature, no reaction took place (Table 2, entries 4 and 5). Owing to the concern of heavy metal pollution from the metal oxidant, organic oxidants were tested. Fortunately, DDQ in dioxane could

Hypervalent organoiodine compounds: from reagents to valuable building blocks in synthesis

• Gwendal Grelier,
• Benjamin Darses and
• Philippe Dauban

Beilstein J. Org. Chem. 2018, 14, 1508–1528, doi:10.3762/bjoc.14.128

• metal-free alternative to the previous methods of formation of sulfur heterocycles 70 has been reported by using elemental sulfur in the presence of cesium carbonate (Scheme 32) [72]. The strategy can be extended to the synthesis of the cyclic selenium analogs 71 by utilizing elemental selenium and

One hundred years of benzotropone chemistry

• Arif Dastan,
• Haydar Kilic and
• Nurullah Saracoglu

Beilstein J. Org. Chem. 2018, 14, 1120–1180, doi:10.3762/bjoc.14.98

• ) 2.1.1. Oxidation of benzo[7]annulenes: 4,5-Benzotropone (11) was synthesized for the first time via oxidation with selenium dioxide of 7H-benzo[7]annulene (14, Scheme 2) [39][40][41][42][43][44][45]. Furthermore, the direct oxidation of 5H-benzo[7]annulene to benzotropones was examined by Srivastava and

• Dev [37]. The selenium dioxide oxidation of 5H-benzo[7]annulene (15) furnished not only 4,5-benzotropone (11; 27%) but also 2,3-benzotropone (12; 13%, Scheme 2). Pomerantz and Swei [51] investigated the oxidation of benzotropylium cation 16 with several oxidants. The oxidants used and results obtained

• synthesis of Julia’s ketone was achieved by dehydration of the known keto-alcohol 164 by boric acid. Oxidation of Julia’s ketone with selenium dioxide gave 2,3-benzotropone (12). An alternative synthesis for 12, which represents a feasible route to avoid the disadvantage of selenium dioxide, is also

Electrophilic trifluoromethylselenolation of terminal alkynes with Se-(trifluoromethyl) 4-methylbenzenesulfonoselenoate

• Clément Ghiazza,
• Anis Tlili and
• Thierry Billard

Beilstein J. Org. Chem. 2017, 13, 2626–2630, doi:10.3762/bjoc.13.260

• nucleophilic approach is based on the use of the CF3Se− anion which must be prepared from stoichiometric amounts of metallic selenium [40][41][42][43][44][45][46][47][48][49][50][51][52][53]. Concerning the electrophilic approach, two reagents, that are easy to obtain, have been described: CF3SeCl [38][54][55

Synthesis and photophysical properties of novel benzophospholo[3,2-b]indole derivatives

• Mio Matsumura,
• Mizuki Yamada,
• Atsuya Muranaka,
• Misae Kanai,
• Naoki Kakusawa,
• Daisuke Hashizume,
• Masanobu Uchiyama and
• Shuji Yasuike

Beilstein J. Org. Chem. 2017, 13, 2304–2309, doi:10.3762/bjoc.13.226

• ]indole 3 in 66% yield. Then, the chemical modification of the phosphorus atom of 3 was carried out and the results are shown in Scheme 2. The treatment of 3 with hydrogen peroxide, elemental sulfur, and elemental selenium afforded the corresponding phosphine oxide 4, sulfide 5, and selenide 6

Oxidative dehydrogenation of C–C and C–N bonds: A convenient approach to access diverse (dihydro)heteroaromatic compounds

• Santanu Hati,
• Ulrike Holzgrabe and
• Subhabrata Sen

Beilstein J. Org. Chem. 2017, 13, 1670–1692, doi:10.3762/bjoc.13.162

• precursors using metal-based reagents. For example selenium dioxide (SeO2, 10 equiv) has been used in the presence of an acid for oxidative dehydrogenation of tetrahydro-β-carbolines 49 to afford aromatic β-carbolines 50 (Scheme 15) [65]. Bhutania et al. [66] has also reported a similar synthesis of 1-aryl-β

• MnO2. Selenium dioxide and potassium dichromate-mediated oxidative dehydrogenation of tetrahydro-β-carbolines [65][66]. Synthesis of substituted benzazoles in the presence of barium permanganate. Oxidative dehydrogenation with phenanthroline-based catalysts. PPTS = pyridinium p-toluenesulfonic acid

Glycoscience@Synchrotron: Synchrotron radiation applied to structural glycoscience

• Serge Pérez and
• Daniele de Sanctis

Beilstein J. Org. Chem. 2017, 13, 1145–1167, doi:10.3762/bjoc.13.114

• interaction with the protein led to the development of different molecular modelling methods. A somehow indirect application of the fine specificity of the binding of oligosaccharides to lectins has been elegantly developed to solve the phase problem in protein crystallography. Selenium-labelled carbohydrates

Transition-metal-free one-pot synthesis of alkynyl selenides from terminal alkynes under aerobic and sustainable conditions

• Adrián A. Heredia and
• Alicia B. Peñéñory

Beilstein J. Org. Chem. 2017, 13, 910–918, doi:10.3762/bjoc.13.92

• acetylenes. Keywords: alkynyl selenide; electrophilic cyclization; nucleophilic substitution; potassium selenocyanate; terminal alkynes; Introduction Alkynyl selenides, as many other selenium compounds, have potential anti-oxidant activities, and may play a role in certain diseases such as cancer, heart

• for their synthesis have been developed. Among them are reactions between lithium or sodium acetylides and electrophilic selenium reactants [23]. The use of hypervalent iodine(III) species [24] or alkynyl bromides with RSeLi [25] as nucleophilic selenium species or the reaction of alkynyl bromides

• of obtaining alkynyl analogues based on our methodology developed for the synthesis of vinyl selenides. We herein report the optimized reaction conditions for the one-pot and three-step synthesis of alkynyl selenides 5 using KSeCN as selenium source in PEG 200 as the solvent under an oxygen

Ultrasound-promoted organocatalytic enamine–azide [3 + 2] cycloaddition reactions for the synthesis of ((arylselanyl)phenyl-1H-1,2,3-triazol-4-yl)ketones

• Gabriel P. Costa,
• Natália Seus,
• Juliano A. Roehrs,
• Raquel G. Jacob,
• Ricardo F. Schumacher,
• Thiago Barcellos,
• Rafael Luque and
• Diego Alves

Beilstein J. Org. Chem. 2017, 13, 694–702, doi:10.3762/bjoc.13.68

• carbonyl compounds could successfully generate an enamine or an enolate, and these species react as dipolarophiles with organic azides in organocatalyzed 1,3-dipolar cycloadditions. Our research group has demonstrated β-enamine–azide cycloaddition reactions for the synthesis of selenium-functionalized

• environmentally sound substrates for the preparation of selenium-functionalized 1,2,3-triazoles still remains a challenge in organic synthesis. Ultrasonic irradiation has emerged in the past decades as a versatile tool in industrial and academic applications [62][63][64][65][66][67]. The use of sonication in

• -amides with a range of substituted aryl azides providing and efficient access to new N-aryl-1,2,3-triazoyl carboxamides in good to excellent yields and short reaction times of [75]. However, to the best of our knowledge, the use of sonochemistry to synthesize complex selenium-functionalized 1,2,3

Dimerization reactions of aryl selenophen-2-yl-substituted thiocarbonyl S-methanides as diradical processes: a computational study

• Michael L. McKee,
• Grzegorz Mlostoń,
• Katarzyna Urbaniak and
• Heinz Heimgartner

Beilstein J. Org. Chem. 2017, 13, 410–416, doi:10.3762/bjoc.13.44

• intermediate, delocalized diradical species. The influence of selenium as a ‘heavy atom’ for stabilization of this intermediate has been emphasized. Keywords: 1,3-dipolar cycloadditions; reaction mechanisms; reactive intermediates; thiocarbonyl S-methanides; thioketones; Introduction Thiocarbonyl S

Nucleophilic displacement reactions of 5′-derivatised nucleosides in a vibration ball mill

• Olga Eguaogie,
• Patrick F. Conlon,
• Francesco Ravalico,
• Jamie S. T. Sweet,
• Thomas B. Elder,
• Louis P. Conway,
• Marc E. Lennon,
• David R. W. Hodgson and
• Joseph S. Vyle

Beilstein J. Org. Chem. 2017, 13, 87–92, doi:10.3762/bjoc.13.11

• efficient and reproducible reaction of the nucleoside substrates with MobSeH was not achieved in a ball mill. We therefore moved to investigate displacements using potassium selenocyanate which is commercially available, less sensitive to oxidation, and is known to react selectively at selenium in reactions

O-Alkylated heavy atom carbohydrate probes for protein X-ray crystallography: Studies towards the synthesis of methyl 2-O-methyl-L-selenofucopyranoside

• Roman Sommer,
• Dirk Hauck,
• Annabelle Varrot,
• Anne Imberty,
• Markus Künzler and
• Alexander Titz

Beilstein J. Org. Chem. 2016, 12, 2828–2833, doi:10.3762/bjoc.12.282

• : carbohydrate chemistry; fucose; lectin; selenoglycoside; Introduction Since the discovery of seleno mercaptan by Siemens in 1847 [1], organoselenium compounds have attracted high attention. Besides their biological and pharmaceutical relevance, e.g., selenocysteine or ebselen [2][3][4][5], selenium-containing

• -glucosamine, have been described in rats as metabolites for detoxifying inorganic selenite intake [12][13]. Selenium-containing compounds are also widely used as tools for protein X-ray crystallography in structural biology. The determination of a protein structure depends on the correct phase recovering

• enable the localization of heavy metal positions and hence determination of the phases [14][15]. Covalently modified detergents, for example selenium-containing alkyl glycosides, have been used to incorporate heavy atoms into the crystal [16][17][18]. To overcome problems in locating numerous rather

A self-assembled cyclodextrin nanocarrier for photoreactive squaraine

• Ulrike Kauscher and
• Bart Jan Ravoo

Beilstein J. Org. Chem. 2016, 12, 2535–2542, doi:10.3762/bjoc.12.248

• that the intersystem-crossing efficiency of squaraines can be remarkably increased by incorporation of heavy atoms like selenium or sulfur and the addition of long aliphatic side chains [20][21]. The enhanced intersystem-crossing efficacy due to spin-orbital interactions makes modified squaraines a

Experimental and theoretical investigations on the high-electron donor character of pyrido-annelated N-heterocyclic carbenes

• Michael Nonnenmacher,
• Dominik M. Buck and
• Doris Kunz

Beilstein J. Org. Chem. 2016, 12, 1884–1896, doi:10.3762/bjoc.12.178

• ), 474.0584 [M(35Cl)+] (calcd 474.0581), 476.0581 [M(37Cl)+] (calcd 476.0552). Synthesis of 2,10-di-tert-butyldipyrido[1,2-c:2′,1′-e]imidazolin-6-selenone (4b). A suspension of 2,10-di-tert-butyldipyrido[1,2-c:2′,1′-e]imidazolium tetrafluoroborate [41] (40.5 mg, 110 μmol) and selenium (32.1 mg, 407 μmol) in 3