Recent advances in the tandem annulation of 1,3-enynes to functionalized pyridine and pyrrole derivatives

• Yi Liu,
• Puying Luo,
• Yang Fu,
• Tianxin Hao,
• Xuan Liu,
• Qiuping Ding and
• Yiyuan Peng

Beilstein J. Org. Chem. 2021, 17, 2462–2476, doi:10.3762/bjoc.17.163

• ]. Then, they also reported another CuH-catalyzed coupling reaction of 1,3-enynes 54 and nitrile to prepare polysubstituted pyrroles 55 (Scheme 21) [66]. The substrates 54 could be easily prepared by Sonogashira coupling of terminal alkynes and vinyl halides. It is worth mentioning that the addition of

Recent advances in the syntheses of anthracene derivatives

• Giovanni S. Baviera and
• Paulo M. Donate

Beilstein J. Org. Chem. 2021, 17, 2028–2050, doi:10.3762/bjoc.17.131

• propargylic carbonates 113 with terminal alkynes 114. The scope of this reaction consisted of 12 examples that were synthesized in moderate to good yields (40–87%). The authors obtained the best yields by using electron-deficient aryl alkynes or secondary carbonates with electron-rich arene substituents (115a

• + 2 + 2] cycloaddition of 1,2-bis(propiolyl)benzene derivative 178 and terminal/internal alkynes 177 (Scheme 41) [75]. The authors performed the reactions with terminal alkynes in toluene, and reactions with internal alkynes in dichloromethane (DCM). They noted that the use of 1,2-bis

• (diphenylphosphino)ethane (DPPE) as ligand improved the yield of the anthraquinones. Representative examples included anthraquinones 179a and 179b obtained from terminal alkynes and 179c and 179d from internal alkynes [75]. Multicomponent reactions In 2009, Singh and co-workers reported a solvent-free methodology to

A recent overview on the synthesis of 1,4,5-trisubstituted 1,2,3-triazoles

• Pezhman Shiri,
• Ali Mohammad Amani and
• Thomas Mayer-Gall

Beilstein J. Org. Chem. 2021, 17, 1600–1628, doi:10.3762/bjoc.17.114

• , and a wide variety of aliphatic moieties, (hetero)aromatic units with electron-donating and electron-withdrawing groups, respectively, and ferrocenyl-substituted terminal alkynes was screened. Diverse triazoles disulfides 98 were achieved in good to high yield. Several aliphatic and aromatic azides

Copper-mediated oxidative C−H/N−H activations with alkynes by removable hydrazides

• Feng Xiong,
• Bo Li,
• Chenrui Yang,
• Liang Zou,
• Wenbo Ma,
• Linghui Gu,
• Ruhuai Mei and
• Lutz Ackermann

Beilstein J. Org. Chem. 2021, 17, 1591–1599, doi:10.3762/bjoc.17.113

• Institute for Sustainable Chemistry (WISCh), Georg-August-Universität Göttingen, Tammannstraße 2, 37077 Göttingen, Germany 10.3762/bjoc.17.113 Abstract The efficient copper-mediated oxidative C–H alkynylation of benzhydrazides was accomplished with terminal alkynes. Thus, a heteroaromatic removable N-2

• context, You [25], Huang [26], Liu [27], Li [28], and co-workers elegantly disclosed copper-mediated/catalyzed cascade C−H alkynylation and annulation with terminal alkynes to afford 3-methyleneisoindolinone derivatives, through the assistance of 8-aminoquinoline [29] or 2-aminophenyl-1H-pyrazole [30

• -catalyzed C−H activations with the MHP auxiliary [41][42][43][44]. In continuation of studies on sustainable 3d transition metal-catalyzed C−H activation [41][42][43][44][45][46][47][48][49], we have now discovered a robust copper-promoted oxidative C−H/N−H functionalization with terminal alkynes (Figure 1d

Double-headed nucleosides: Synthesis and applications

• Vineet Verma,
• Jyotirmoy Maity,
• Vipin K. Maikhuri,
• Ritika Sharma,
• Himal K. Ganguly and
• Ashok K. Prasad

Beilstein J. Org. Chem. 2021, 17, 1392–1439, doi:10.3762/bjoc.17.98

• 148 was then 5′-O-dimethoxytritylated in the presence of DMTrCl (4,4′-dimethoxytrityl chloride) and pyridine. The 5′-O-dimethoxytritylated nucleoside 149 was further coupled with terminal alkynes 150a–d under Sonogashira conditions to afford the double-headed nucleosides 151a–d (Scheme 38) [24

Fritsch–Buttenberg–Wiechell rearrangement of magnesium alkylidene carbenoids leading to the formation of alkynes

• Tsutomu Kimura,
• Koto Sekiguchi,
• Akane Ando and
• Aki Imafuji

Beilstein J. Org. Chem. 2021, 17, 1352–1359, doi:10.3762/bjoc.17.94

• synthesis [1]. Electrophilic additions of alkynes give functionalized compounds, and cycloadditions such as the Huisgen reaction afford cyclic compounds. Weakly acidic terminal alkynes can be deprotonated, and the resulting acetylides are used as carbon nucleophiles. Terminal alkynes are also used for the

Highly regio- and stereoselective phosphinylphosphination of terminal alkynes with tetraphenyldiphosphine monoxide under radical conditions

• Dat Phuc Tran,
• Yuki Sato,
• Yuki Yamamoto,
• Shin-ichi Kawaguchi,
• Shintaro Kodama,
• Akihiro Nomoto and
• Akiya Ogawa

Beilstein J. Org. Chem. 2021, 17, 866–872, doi:10.3762/bjoc.17.72

• reactivities. The method using V-40 as an initiator is successfully investigated for the regio- and stereoselective phosphinylphosphination of terminal alkynes giving the corresponding trans-isomers of 1-diphenylphosphinyl-2-diphenylthiophosphinyl-1-alkenes in good yields. The protocol can be applied to a wide

• variety of terminal alkynes including both alkyl- and arylalkynes. Keywords: (E)-1,2-bis(diphenylphosphino)ethylene derivative; radical addition; stereoselective phosphinylphosphination; terminal alkyne; tetraphenyldiphosphine monoxide; Introduction Organophosphorus compounds are an essential class of

• ]. The phosphinylphosphination of various terminal alkynes 2 with Ph2P(O)PPh2 1 was conducted under the optimization conditions (Scheme 3). Terminal alkylalkynes 2a, 2b, and 2c reacted efficiently with 1 to give the corresponding adducts 3a, 3b, and 3c in moderate to good yields (67%, 71%, and 83

Effective microwave-assisted approach to 1,2,3-triazolobenzodiazepinones via tandem Ugi reaction/catalyst-free intramolecular azide–alkyne cycloaddition

• Maryna O. Mazur,
• Oleksii S. Zhelavskyi,
• Eugene M. Zviagin,
• Svitlana V. Shishkina,
• Vladimir I. Musatov,
• Maksim A. Kolosov,
• Elena H. Shvets,
• Anna Yu. Andryushchenko and
• Valentyn A. Chebanov

Beilstein J. Org. Chem. 2021, 17, 678–687, doi:10.3762/bjoc.17.57

• harder while the microwave-assisted catalyst-free conditions were effective for both terminal and non-terminal alkynes. Keywords: click chemistry; microwave chemistry; multicomponent reactions; triazolobenzodiazepines; Ugi reaction; Introduction Benzannulated heterocycles are among the most important

• bond. Usually, AAC reactions on non-terminal alkynes are performed with ruthenium catalysis [21] that determined our decision to start screening conditions using the chloro(cyclopentadienyl)bis(triphenylphosphine)ruthenium(II) complex ((Cp)Ru(PPh3)2Cl) as catalyst. However, carrying out the reaction

• starting material) to well-resolved doublets and triplets of the annulated benzene ring (in the product) that are characteristic for the cyclization of all Ugi products (Figure 5). This NMR pattern change can be used as the only remarkable indicator of successful click reaction on non-terminal alkynes

Synthesis of N-perfluoroalkyl-3,4-disubstituted pyrroles by rhodium-catalyzed transannulation of N-fluoroalkyl-1,2,3-triazoles with terminal alkynes

• Olga Bakhanovich,
• Viktor Khutorianskyi,
• Vladimir Motornov and
• Petr Beier

Beilstein J. Org. Chem. 2021, 17, 504–510, doi:10.3762/bjoc.17.44

• Prague, Czech Republic 10.3762/bjoc.17.44 Abstract The rhodium-catalyzed transannulation of N-perfluoroalkyl-1,2,3-triazoles with aromatic and aliphatic terminal alkynes under microwave heating conditions afforded N-perfluoroalkyl-3,4-disubstituted pyrroles (major products) and N-fluoroalkyl-2,4

• , conveniently prepared by [3 + 2] cycloadditions of terminal alkynes with sulfonyl azides, have been used as the precursors to N-sulfonylindoles by transition-metal-catalyzed transannulation reactions. In the presence of Rh(II) or Ni(0) catalysts the triazole ring-opening takes place and intermediate highly

• ]. Taking inspiration from the work of Gevorgyan (Scheme 1h) [11], we report herein our recent results on the rhodium-catalyzed transannulation of N-perfluoroalkyl-1,2,3-triazoles with terminal alkynes leading to unusually substituted N-perfluoroalkylpyrroles. Results and Discussion The published

The preparation and properties of 1,1-difluorocyclopropane derivatives

• Kymbat S. Adekenova,
• Peter B. Wyatt and
• Sergazy M. Adekenov

Beilstein J. Org. Chem. 2021, 17, 245–272, doi:10.3762/bjoc.17.25

• alkynylation of cyclopropanes 161 with terminal alkynes that led to the formation of the isomeric fluorinated enynes 164 and 165. Shortly before, a Pd-catalyzed ring-opening sulfonylation of gem-difluorocyclopropanes with the formation of 2-fluoroallylic sulfones 166 has been reported (Scheme 71) [122]. The

Ring-closing metathesis of prochiral oxaenediynes to racemic 4-alkenyl-2-alkynyl-3,6-dihydro-2H-pyrans

• Viola Kolaříková,
• Markéta Rybáčková,
• Martin Svoboda and
• Jaroslav Kvíčala

Beilstein J. Org. Chem. 2020, 16, 2757–2768, doi:10.3762/bjoc.16.226

• intermediate to undergo subsequent metathesis reactions leading to catalyst deactivation [23]. In both cases, the effect of ethene was especially productive for the Grubbs 1st generation precatalyst and is typically applied for terminal alkynes or alkynes with little steric hindrance of the triple bond. In

Efficient [(NHC)Au(NTf₂)]-catalyzed hydrohydrazidation of terminal and internal alkynes

• Maximillian Heidrich and
• Herbert Plenio

Beilstein J. Org. Chem. 2020, 16, 2080–2086, doi:10.3762/bjoc.16.175

• activating the alkyne. Consequently, even at 0.05 mol % catalyst loading virtually quantitative substrate conversion was observed after extending the reaction time to 96 h (Table 2, entry 3). In the absence of the Au catalyst, no product was formed. Hydrohydrazidation reactions of terminal alkynes: Following

• (6d, 1.15 g, 4.83 mmol, 97% yield) as colorless needles. Simplified mechanism of the hydrohydrazidation (NuH= ArCONHNH2) of alkynes. [(NHC)Au(NTf2)] complexes tested in hydrohydrazidation reactions of phenylacetylene. Hydrohydrazidation of terminal alkynes in chlorobenzene and anisole using complex 1

When metal-catalyzed C–H functionalization meets visible-light photocatalysis

• Lucas Guillemard and
• Joanna Wencel-Delord

Beilstein J. Org. Chem. 2020, 16, 1754–1804, doi:10.3762/bjoc.16.147

Clickable azide-functionalized bromoarylaldehydes – synthesis and photophysical characterization

• Dominik Göbel,
• Marius Friedrich,
• Enno Lork and
• Boris J. Nachtsheim

Beilstein J. Org. Chem. 2020, 16, 1683–1692, doi:10.3762/bjoc.16.139

• %; or NBS, PPh3, CH2Cl2, 0 °C to 25 °C, 2 h, 91%; or PBr3, CH2Cl2, 0 °C to 25 °C, 2 h, 92%; d) MeOTf, CH2Cl2, 25 °C, 3 h; e) NaBH4, THF/MeOH 4:1 v/v, 0 °C, 3 h. Overall yield from 24 to 28: 56% (2 steps). a) CuAAC reactions of azide-functionalized bromocarbaldehydes 3, 4 and 5 with terminal alkynes to

• cycloadditions with model alkynes. Besides two ortho- and para-bromo-substituted benzaldehydes, the azide functionalization of a fluorene-based structure will be presented. The copper(I)-catalyzed azide–alkyne cycloaddition (CuAAC) of the so-synthesized azide-functionalized bromocarbaldehydes with terminal

• alkynes, exhibiting different degrees of steric demand, was performed in high efficiency. Finally, we investigated the photophysical properties of the azide-functionalized arenes and their covalently linked triazole derivatives to gain deeper insight towards the effect of these covalent linkers on the

Pauson–Khand reaction of fluorinated compounds

• Jorge Escorihuela,
• Daniel M. Sedgwick,
• Alberto Llobat,
• Mercedes Medio-Simón,
• Pablo Barrio and
• Santos Fustero

Beilstein J. Org. Chem. 2020, 16, 1662–1682, doi:10.3762/bjoc.16.138

• are poor substrates for the PKR as they are deactivated in the cobalt-complexation step, and the highest yields are usually obtained with terminal alkynes. The scenario is similar in the case of fluorinated substrates, with the intramolecular version being much more developed than the intermolecular

• ). This trend is strictly followed by terminal alkynes, for which exclusive formation of the α-substituted enone is observed, while mixtures are usually obtained with internal dissymmetric alkynes, although the major product follows the aforementioned trend [41]. On the other hand, for alkynes bearing

• obtained using the less reactive triphenylphosphine dicobaltpentacarbonyl complex 63 as the catalyst (Scheme 35). In a later study [72], Riera and Fustero generalized the use of trifluoromethylalkynes as substrates for the PKR. The copper-catalyzed trifluoromethylation of terminal alkynes described by Qing

Fluorohydration of alkynes via I(I)/I(III) catalysis

• Jessica Neufeld,
• Constantin G. Daniliuc and
• Ryan Gilmour

Beilstein J. Org. Chem. 2020, 16, 1627–1635, doi:10.3762/bjoc.16.135

• transformation [53]. Results and Discussion To explore the feasibility of generating α-fluoroketones from terminal alkynes via I(I)/I(III) catalysis, 4-pentynyl benzoate (1) was selected as the substrate for optimisation studies (Table 1). The inexpensive, commercially available p-TolI was used as an

An overview on disulfide-catalyzed and -cocatalyzed photoreactions

• Yeersen Patehebieke

Beilstein J. Org. Chem. 2020, 16, 1418–1435, doi:10.3762/bjoc.16.118

• groups that contain heteroatoms. Ogawa and co-workers reported a class of efficient diboration reactions. Under light irradiation, disulfide was used as the photocatalyst to facilitate the addition of bis(pinacolato)diboron (B2pin2) to terminal alkynes [19], and the corresponding diboryl alkenes were

Copper-based fluorinated reagents for the synthesis of CF₂R-containing molecules (R ≠ F)

• Louise Ruyet and
• Tatiana Besset

Beilstein J. Org. Chem. 2020, 16, 1051–1065, doi:10.3762/bjoc.16.92

• functionalization of alkyl bromides, alkyl mesylates, aryldiazonium salts [43] as well as electron-rich arenes [44] (Scheme 4). In 2015, the group of Qing investigated the oxidative difluoromethylation reaction of terminal alkynes with TMSCF2H via a copper-mediated reaction [45]. Using a stoichiometric amount of

• CuI, in the presence of t-BuOK and 9,10-phenanthraquinone, the functionalization of a panel of (hetero)aromatic and aliphatic terminal alkynes was achieved (Scheme 5). A good functional group tolerance was observed as alkynes bearing a cyano, ester, bromo or amino group among others were suitable

• substrates. Based on 19F NMR studies, the authors suggested the following mechanism: first the in situ generation of a CuCF2H complex from TMSCF2H in equilibrium with the corresponding cuprate (Cu(CF2H)2−) occurred followed by the reaction with terminal alkynes under basic conditions. The resulting

Recent applications of porphyrins as photocatalysts in organic synthesis: batch and continuous flow approaches

• Rodrigo Costa e Silva,
• Luely Oliveira da Silva,
• Aloisio de Andrade Bartolomeu,
• Timothy John Brocksom and
• Kleber Thiago de Oliveira

Beilstein J. Org. Chem. 2020, 16, 917–955, doi:10.3762/bjoc.16.83

• hydration of terminal alkynes to ketones can be photocatalyzed by rhodium(III) tetrakis(p-sulfonylphenyl)porphyrin (RhIIITSPP) [37]. The coupling between RhIII(TSPP) and terminal alkynes produced the β-carbonylalkylrhodium porphyrin as a photoactive intermediate, whose irradiation produced the PhCOCH2

• tetrahydroquinolines by reductive quenching. Selenylation and thiolation of anilines. NiTPP as photoredox catalyst in oxidative and reductive quenching, in comparison with other photocatalysts. C–O bond cleavage of 1-phenylethanol using a cobalt porphyrin (CoTMPP) under visible light. Hydration of terminal alkynes by

Copper-catalyzed O-alkenylation of phosphonates

• Nuria Vázquez-Galiñanes,
• Mariña Andón-Rodríguez,
• Patricia Gómez-Roibás and
• Martín Fañanás-Mastral

Beilstein J. Org. Chem. 2020, 16, 611–615, doi:10.3762/bjoc.16.56

• counterparts has received less attention. Current methodologies for the synthesis of acyclic mixed enol phosphonates include the Perkow-type reaction between phosphonites and α-halocarbonyl compounds [11], the mercury-catalyzed addition of phosphonic acid monoesters to terminal alkynes [12][13] and multistep

A systematic review on silica-, carbon-, and magnetic materials-supported copper species as efficient heterogeneous nanocatalysts in “click” reactions

• Pezhman Shiri and
• Jasem Aboonajmi

Beilstein J. Org. Chem. 2020, 16, 551–586, doi:10.3762/bjoc.16.52

• in “click” reactions of organic halides, terminal alkynes, and sodium azide. High yields of various triazole products were obtained when using 10 mg of the catalyst 78 in water at reflux for 30 min (Scheme 15). Moreover, this synergistic dual catalyst was also investigated in the stepwise generation

• heterogeneous nanocatalyst in “click” reactions for the multicomponent synthesis of triazole products in water with ultrasound irradiation and 0.017 mol % catalyst loading. As such, a series of aryl/alkyl-substituted oxiranes was treated with sodium azide and nonactivated terminal alkynes, giving 1,2,3-triazole

• to be highly active in [3 + 2] cycloaddition reactions of halides, nonactivated terminal alkynes, and sodium azide (Scheme 21). Copper(I) ions were attached to the surface of carbon graphene as outlined in Scheme 21. Therein, GO was generated by Hummer’s method, and ascorbic acid was used to produce

Controlling alkyne reactivity by means of a copper-catalyzed radical reaction system for the synthesis of functionalized quaternary carbons

• Goki Hirata,
• Yu Yamane,
• Naoya Tsubaki,
• Reina Hara and
• Takashi Nishikata

Beilstein J. Org. Chem. 2020, 16, 502–508, doi:10.3762/bjoc.16.45

• ; Introduction Terminal alkynes are undoubtedly useful functional groups for organic synthesis, and they can undergo a variety of reactions [1]. The C–C triple bond of an alkyne is suitable for addition reactions, whereas the terminal hydrogen atom is a good target for cross-coupling by using Sonogashira and

•  1, entry 4). We will discuss the proposed reaction mechanism later in the text, but the formation of 3a-I via ATRA could be important for the alkynylation reaction. Generally, the Sonogashira coupling requires both a Pd catalyst and a Cu co-catalyst [2][3][4]. However, couplings with terminal

• alkynes can be carried out in the absence of the Pd catalyst [23][24][25][26][27][28][29][30][31][32]; this is the so-called Castro–Stephens reaction [33]. The effect of the base was very important for producing the main product 3a (Table 1, entries 5–8). If the reaction was performed in the presence of a

Copper-promoted/copper-catalyzed trifluoromethylselenolation reactions

• Clément Ghiazza and
• Anis Tlili

Beilstein J. Org. Chem. 2020, 16, 305–316, doi:10.3762/bjoc.16.30

• could be trifluoromethylselenolated that way (Scheme 2) [13][15][16][17]. Mechanistically, the authors postulated the involvement of copper(I)/(III) oxidation states. Oxidative cross-coupling reactions between terminal alkynes using the [(bpy)CuSeCF3]2 complex were also undertaken by the same group to

• reagent was involved in several cross-coupling processes, including copper chemistry. In this context, in 2015, the group of Rueping reported an oxidative trifluoromethylselenolation process of terminal alkynes and boronic acid derivatives (Scheme 10) [27]. Using a stoichiometric amount of copper/ligand

• arylcopper(I) species was the key intermediate. Terminal alkynes were also investigated under similar reaction conditions (Scheme 13) [37]. Aromatic and π-activated aliphatic substrates led to the desired products in moderate to very good yields. Moreover, vinyl sulfone derivatives were formed when the

Combination of multicomponent KA² and Pauson–Khand reactions: short synthesis of spirocyclic pyrrolocyclopentenones

• Riccardo Innocenti,
• Elena Lenci,
• Gloria Menchi and
• Andrea Trabocchi

Beilstein J. Org. Chem. 2020, 16, 200–211, doi:10.3762/bjoc.16.23

• basic nitrogen atoms [28]. The variation of the alkyne component proved to give the KA2 coupling adduct when aromatic terminal alkynes were used, as shown in Table 1, entries 1 and 2 for those containing phenyl and thienyl moieties, resulting in 82% and 74% yield for the KA2 step. Subsequent acylation

Iodine-mediated hydration of alkynes on keto-functionalized scaffolds: mechanistic insight and the regiospecific hydration of internal alkynes

• Zachary Lee,
• Brandon R. Jones,
• Nyochembeng Nkengbeza,
• Michael Phillips,
• Kayla Valentine,
• Alexis Stewart,
• Brandon Sellers,
• Nicholas Shuber and
• Karelle S. Aiken

Beilstein J. Org. Chem. 2019, 15, 2747–2752, doi:10.3762/bjoc.15.265

• hydration reaction of alkynes serves as a green alternative to metal-catalyzed procedures. Previous work has shown that this method works well with terminal alkynes on keto-functionalized scaffolds, including 1,3-dicarbonyls and their heteroatom analogues. It was hypothesized that the reaction proceeds

• room temperature. Previous work by our group has shown that terminal alkynes on keto scaffolds undergo iodine-mediated hydration to form 1,4-diketo products 2 (Scheme 1) [15]. At that time, our studies revealed that a keto group must be present in the substrate, as the hydration requires neighboring

• spectrum for α-iodo intermediate 9 in CD3CN in the range of 0.90–5.00 ppm (for 1H NMR signals) and −1.0–77.0 ppm (for 13C NMR signals), respectively. Proposed mechanism for the iodine-mediated hydration of terminal alkynes 1 [15]. Possible outcomes of the iodine-mediated hydration of asymmetric, internal