Synthesis and biological profile of 2,3-dihydro[1,3]thiazolo[4,5-b]pyridines, a novel class of acyl-ACP thioesterase inhibitors

• Jens Frackenpohl,
• David M. Barber,
• Guido Bojack,
• Birgit Bollenbach-Wahl,
• Ralf Braun,
• Rahel Getachew,
• Sabine Hohmann,
• Kwang-Yoon Ko,
• Karoline Kurowski,
• Bernd Laber,
• Rebecca L. Mattison,
• Thomas Müller,
• Anna M. Reingruber,
• Dirk Schmutzler and
• Andrea Svejda

Beilstein J. Org. Chem. 2024, 20, 540–551, doi:10.3762/bjoc.20.46

• –6.48 (d, 1H), 4.53–4.44 (br s, 2H, NH2). 6-(2-Fluorophenyl)pyridin-2-ylamine (9b, 9.98 g, 52.49 mmol, 1.0 equiv) was dissolved in acetonitrile (140 mL) and cooled to 0 °C. Thereafter, N-bromosuccinimide (20.56 g, 115.49 mmol, 2.2 equiv) was added carefully. The reaction mixture was warmed to room

Green and sustainable approaches for the Friedel–Crafts reaction between aldehydes and indoles

• Periklis X. Kolagkis,
• Eirini M. Galathri and
• Christoforos G. Kokotos

Beilstein J. Org. Chem. 2024, 20, 379–426, doi:10.3762/bjoc.20.36

• acids, such as N-bromosuccinimide (NBS) [54], silica chloride [55], Ph3CCl [56], ZnO [57], La(NO3)3·6H2O [58], V(HSO4)3 [59], Cu(ClO4)2·6H2O [60], Fe/Al pillared clay [61], trimethylsilyl chloride (TMSCl) [62], BiCl3-loaded montmorillonite K10 [63][64][65][66][67], ZrO2-MgO [68] or CaO [69]. Silica gel

Copper-promoted C5-selective bromination of 8-aminoquinoline amides with alkyl bromides

• Changdong Shao,
• Chen Ma,
• Li Li,
• Jingyi Liu,
• Yanan Shen,
• Chen Chen,
• Qionglin Yang,
• Tianyi Xu,
• Zhengsong Hu,
• Yuhe Kan and
• Tingting Zhang

Beilstein J. Org. Chem. 2024, 20, 155–161, doi:10.3762/bjoc.20.14

• brominated imides, such as N-bromosuccinimide (NBS), N-bromosaccharin (NBSA), tribromoisocyanuric acid (TBCA), 1,3-dibromo-5,5-dimethylhydantoin (DBDMH), and so on (Scheme 1, reaction 2) [21][22][23][24]. However, reports on the bromination of C5–H of 8-aminoquinolines employing acyl bromides, alkyl bromides

Thienothiophene-based organic light-emitting diode: synthesis, photophysical properties and application

• Recep Isci and
• Turan Ozturk

Beilstein J. Org. Chem. 2023, 19, 1849–1857, doi:10.3762/bjoc.19.137

• nitrogen flow. Materials 3-Bromothiophene (97%, Across), 2-bromo-4′-methoxyacetophenone (97% Merck), N-bromosuccinimide (Sigma-Aldrich), polyphosphoric acid (PPA, 115% H3PO4 basis, Sigma-Aldrich), n-butyllithium (2.5 M in hexanes, Sigma-Aldrich), sodium sulfate (Merck), 4-bromotriphenylamine (Sigma-Aldrich

Trifluoromethylated hydrazones and acylhydrazones as potent nitrogen-containing fluorinated building blocks

• Zhang Dongxu

Beilstein J. Org. Chem. 2023, 19, 1741–1754, doi:10.3762/bjoc.19.127

• /trifluoromethylated organic molecules is equally attractive and proven to be important. Generally, the reaction of trifluoroacetaldehyde hydrazones with N-chloro- and N-bromosuccinimide is used to prepare trifluoromethylated hydrazonoyl halides (Scheme 8a), or alternatively trichloroisocyanuric acid (TCCA) can be

First synthesis of acylated nitrocyclopropanes

• Kento Iwai,
• Rikiya Kamidate,
• Khimiya Wada,
• Haruyasu Asahara and
• Nagatoshi Nishiwaki

Beilstein J. Org. Chem. 2023, 19, 892–900, doi:10.3762/bjoc.19.67

• our study using ethyl acetoacetate (3c) as starting 1,3-dicarbonyl compound according to method b (Scheme 2). After heating an acetonitrile solution of 3c, N-bromosuccinimide, and p-toluenesulfonic acid [7], α-bromoacetoacetate 6c was isolated with a 44% yield after purification of the reaction

Automated grindstone chemistry: a simple and facile way for PEG-assisted stoichiometry-controlled halogenation of phenols and anilines using N-halosuccinimides

• Dharmendra Das,
• Akhil A. Bhosle,
• Amrita Chatterjee and
• Mainak Banerjee

Beilstein J. Org. Chem. 2022, 18, 999–1008, doi:10.3762/bjoc.18.100

• reaction time, and mild reaction conditions are a few noticeable merits of this environmentally sustainable mechanochemical protocol. Keywords: automated grinding; chemoselectivity; mechanochemistry; N-bromosuccinimide; PEG-400; regioselectivity; stoichiometry-controlled halogenation; Introduction Aryl

• with N-bromosuccinimide (NBS) was carried out in toxic polar solvents (e.g., DMF), but no iodinated or chlorinated products were obtained because of the low reactivity of NIS and NCS (Scheme 1a) [24][25][26][27]. In recent time, the use of Lewis or Brønsted acids, Lewis bases, and transition-metal

• reaction conditions was carried out using p-cresol (1a) as the model substrate with 1.1 equiv of N-bromosuccinimide (NBS) for attempted monobromination. They were ground together at the speed of 100 rpm in an electrical grinder (EG) of Agate-made under neat conditions for 30 min. The reaction was

Introducing a new 7-ring fused diindenone-dithieno[3,2-b:2',3'-d]thiophene unit as a promising component for organic semiconductor materials

• Valentin H. K. Fell,
• Joseph Cameron,
• Alexander L. Kanibolotsky,
• Eman J. Hussien and
• Peter J. Skabara

Beilstein J. Org. Chem. 2022, 18, 944–955, doi:10.3762/bjoc.18.94

• aqueous lithium hydroxide, THF, 4 h, 94% [15]; e) copper powder, quinoline, 230 °C, 1 h, 81% [15]; f) N-bromosuccinimide, CHCl3/glacial acetic acid, 0 °C, 1 h, rt, 1.5 h, 94% [15] ; g) n-BuLi, −90 °C, 20 min, triisopropyl borate, −80 °C, anhydrous THF, rt, overnight, 97% [34]; h) pinacol, toluene, 115 °C

Mechanochemical halogenation of unsymmetrically substituted azobenzenes

• Dajana Barišić,
• Mario Pajić,
• Ivan Halasz,
• Darko Babić and
• Manda Ćurić

Beilstein J. Org. Chem. 2022, 18, 680–687, doi:10.3762/bjoc.18.69

• -halosuccinimide (NXS, X = Br, I) as halogen source [47]. Two years later in 2017, Eslami's group applied a ball-milling method to synthesize aryl bromides and α-bromoketones with N-bromosuccinimide (NBS) and MCM-41-SO3H catalyst and no liquid additives [48]. In 2018, Wang and co-workers developed the ball-milling

• solvent-free synthesis of phenanthridinones via a cascaded oxidative C–N coupling followed by a halogenation reaction [50]. Only recently, our group carried out a detailed synthetic and mechanistic study of the mechanochemical PdII-catalyzed bromination of unsubstituted azobenzene (L1) by N

• -bromosuccinimide (NBS) under neat grinding (NG) and liquid-assisted grinding (LAG) conditions in a ball mill [51]. Insight into the dynamics of the formation of reaction intermediates and products was obtained by in situ Raman monitoring that provided information on the nature of the catalytically active PdII

Cs₂CO₃-Promoted reaction of tertiary bromopropargylic alcohols and phenols in DMF: a novel approach to α-phenoxyketones

• Ol'ga G. Volostnykh,
• Olesya A. Shemyakina,
• Anton V. Stepanov and
• Igor' A. Ushakov

Beilstein J. Org. Chem. 2022, 18, 420–428, doi:10.3762/bjoc.18.44

• bromopropargylic alcohols under the reported conditions. The bromopropargylic alcohols are readily available from acetylenic alcohols and hypobromite [22] or N-bromosuccinimide [23]. The presence of the hydroxy group expands the synthetic potential of these bromoacetylenes. Thus, we have recently demonstrated a

Synthesis of novel [1,2,4]triazolo[1,5-b][1,2,4,5]tetrazines and investigation of their fungistatic activity

• Anna V. Korotina,
• Svetlana G. Tolshchina,
• Rashida I. Ishmetova,
• Natalya P. Evstigneeva,
• Natalya A. Gerasimova,
• Natalya V. Zilberberg,
• Nikolay V. Kungurov,
• Gennady L. Rusinov,
• Oleg N. Chupakhin and
• Valery N. Charushin

Beilstein J. Org. Chem. 2022, 18, 243–250, doi:10.3762/bjoc.18.29

• ) was only 10%. It can be explained by a low stability of the starting tetrazine 2i containing the formamidine moiety, since the latter on heating is easily transformed into the amino group, thus leading to 3-amino-6-(3,5-dimethylpyrazol-1-yl)-1,2,4,5-tetrazine. It has been found that N-bromosuccinimide

• formation of difficult-to-separate reaction mixtures with a low content of the target products 3a,b,g, which could not be isolated in a pure form. Heating of tetrazines 2 with N-bromosuccinimide in refluxing acetonitrile without microwave irradiation made it possible to obtain the product 3j in a low yield

Efficient N-arylation of 4-chloroquinazolines en route to novel 4-anilinoquinazolines as potential anticancer agents

• Rodolfo H. V. Nishimura,
• Thiago dos Santos,
• Valter E. Murie,
• Luciana C. Furtado,
• Leticia V. Costa-Lotufo and
• Giuliano C. Clososki

Beilstein J. Org. Chem. 2021, 17, 2968–2975, doi:10.3762/bjoc.17.206

• . While anthranilamide (5) bromination with N-bromosuccinimide in acetonitrile at room temperature [29] furnished 2-amino-5-bromobenzamide (6a) in 78% yield, iodination of 5 with iodine in the presence of hydrogen peroxide in water [30] at 50 °C provided 2-amino-5-iodobenzamide (6b) in 89% yield. After

Synthesis of highly substituted fluorenones via metal-free TBHP-promoted oxidative cyclization of 2-(aminomethyl)biphenyls. Application to the total synthesis of nobilone

• Ilya A. P. Jourjine,
• Lukas Zeisel,
• Jürgen Krauß and
• Franz Bracher

Beilstein J. Org. Chem. 2021, 17, 2668–2679, doi:10.3762/bjoc.17.181

• nitrate (CAN) [41], 2,2,6,6-tetramethylpiperidinyloxyl (TEMPO)/CuCl [51], K2S2O8 [36], dimethyl sulfoxide (DMSO)/O2 [52], PhI(OAc)2/benzoyl peroxide (BPO) [47], Dess-Martin periodinane, N-bromosuccinimide (NBS), N-hydroxyphthalimide (NHPI)/Co(OAc)2/O2 [53], H2O2/tetrabutylammonium iodide (TBAI) [43], CBr4

Silica gel and microwave-promoted synthesis of dihydropyrrolizines and tetrahydroindolizines from enaminones

• Robin Klintworth,
• Garreth L. Morgans,
• Stefania M. Scalzullo,
• Charles B. de Koning,
• Willem A. L. van Otterlo and
• Joseph P. Michael

Beilstein J. Org. Chem. 2021, 17, 2543–2552, doi:10.3762/bjoc.17.170

• the unsubstituted pyrrole position (Scheme 5). This site was readily brominated with N-bromosuccinimide in N,N-dimethylformamide [71] to afford ethyl 7-bromo-6-phenyl-2,3-dihydro-1H-pyrrolizine-5-carboxylate (28) in 83% yield. Palladium(0)-catalyzed Suzuki–Miyaura coupling of 28 with phenylboronic

Advances in mercury(II)-salt-mediated cyclization reactions of unsaturated bonds

• Sumana Mandal,
• Raju D. Chaudhari and
• Goutam Biswas

Beilstein J. Org. Chem. 2021, 17, 2348–2376, doi:10.3762/bjoc.17.153

• with HgCl2 (0.5 equiv) in presence of N-bromosuccinimide (NBS) undergoes cyclization yielding stable bromo alkenes 87 (Scheme 28) [80][81]. Atta et al. reported the specific cyclization of ethynyl phenols 88 in presence of HgCl2 at ambient temperature yielding benzofuran derivatives 89. They had

A novel methodology for the efficient synthesis of 3-monohalooxindoles by acidolysis of 3-phosphate-substituted oxindoles with haloid acids

• Li Liu,
• Yue Li,
• Tiao Huang,
• Dulin Kong and
• Mingshu Wu

Beilstein J. Org. Chem. 2021, 17, 2321–2328, doi:10.3762/bjoc.17.150

• disclosed the application of N-fluorobenzenesulfonimide (NFSI) and NBS (N-bromosuccinimide), respectively, as the halogen sources, with diazoacetamide under catalyst-free conditions via a carbene pathway, which constructed 3-fluorooxindoles and 3-bromooxindoles (Scheme 1, reaction 1) [20][21]. Then, the

Chemical syntheses and salient features of azulene-containing homo- and copolymers

• Vijayendra S. Shetti

Beilstein J. Org. Chem. 2021, 17, 2164–2185, doi:10.3762/bjoc.17.139

• due to the formation of dehydropolyazulene via oxidative aromatization. In 2003, Lai and co-workers [20] synthesized 1,3-polyazulene 5 from azulene in two steps as shown in Scheme 3. First, azulene (1) was dibrominated at the 1,3-positions by treatment with N-bromosuccinimide (NBS) and the consequent

Manganese/bipyridine-catalyzed non-directed C(sp³)–H bromination using NBS and TMSN₃

• Kumar Sneh,
• Takeru Torigoe and
• Yoichiro Kuninobu

Beilstein J. Org. Chem. 2021, 17, 885–890, doi:10.3762/bjoc.17.74

• Kasugakoen, Kasuga-shi, Fukuoka 816-8580, Japan 10.3762/bjoc.17.74 Abstract A Mn(II)/bipyridine-catalyzed bromination reaction of unactivated aliphatic C(sp3)−H bonds has been developed using N-bromosuccinimide (NBS) as the brominating reagent. The reaction proceeded in moderate-to-good yield, even on a

• benzylic positions of a wide range of substrates. The manganese catalyst, brominating agent, and additives are commercially available, and the reaction can be achieved by simply mixing these reagents with the substrate. Results and Discussion The reaction of isoamyl alcohol derivative 1a with N

• -bromosuccinimide (NBS) and TMSN3 in the presence of a catalytic amount of Mn(OAc)2 and bipyridine (bpy) in 1,2-dichloroethane (DCE) at 60 °C for 18 h gave C(sp3)–H brominated product 2a in 10% yield (Table 1, entry 1). Although the yield of 2a did not increase when performing the reaction in acetonitrile (Table 1

Microwave-assisted multicomponent reactions in heterocyclic chemistry and mechanistic aspects

• Shivani Gulati,
• Stephy Elza John and
• Nagula Shankaraiah

Beilstein J. Org. Chem. 2021, 17, 819–865, doi:10.3762/bjoc.17.71

Total synthesis of decarboxyaltenusin

• Lucas Warmuth,
• Aaron Weiß,
• Marco Reinhardt,
• Anna Meschkov,
• Ute Schepers and
• Joachim Podlech

Beilstein J. Org. Chem. 2021, 17, 224–228, doi:10.3762/bjoc.17.22

• protected with tert-butyldimethylsilyl chloride in the presence of 4-(dimethylamino)pyridine (DMAP) and imidazole (Scheme 2) according to a published procedure [20]. The thus obtained bis(silylether) 3 was then brominated with N-bromosuccinimide (NBS), where the utilization of acetonitrile as solvent [21

Synthesis of imidazo[1,5-a]pyridines via cyclocondensation of 2-(aminomethyl)pyridines with electrophilically activated nitroalkanes

• Dmitrii A. Aksenov,
• Nikolai A. Arutiunov,
• Vladimir V. Maliuga,
• Alexander V. Aksenov and
• Michael Rubin

Beilstein J. Org. Chem. 2020, 16, 2903–2910, doi:10.3762/bjoc.16.239

• -(bromomethyl)quinoline (21c) was prepared from commercially available 6-bromo-2-methylquinoline (22c, via radical bromination in the presence of NBS and dibenzoyl peroxide [51]. To this end, the methylquinoline 22c (3.33 g, 15 mmol) was dissolved in carbon tetrachloride (30 mL), and N-bromosuccinimide (2.94 g

Synthesis and characterization of S,N-heterotetracenes

• Astrid Vogt,
• Florian Henne,
• Christoph Wetzel,
• Elena Mena-Osteritz and
• Peter Bäuerle

Beilstein J. Org. Chem. 2020, 16, 2636–2644, doi:10.3762/bjoc.16.214

• TIPS-protected thienopyrrole 29 in 92% yield which was further brominated with N-bromosuccinimide (NBS) to dibrominated thienopyrrole 30 in 99% yield. Pd-catalyzed Neghishi-type coupling of 30 with 3-bromo-2-thienylzinc chloride (6) resulted in thienyl-substituted thienopyrrole 31 in moderate 37% yield

Synthetic approaches to bowl-shaped π-conjugated sumanene and its congeners

• Shakeel Alvi and
• Rashid Ali

Beilstein J. Org. Chem. 2020, 16, 2212–2259, doi:10.3762/bjoc.16.186

• -tribromomethyltriphenylene (8) using N-bromosuccinimide (NBS) in the presence of AIBN in CCl4. To their surprise, when compound 8 was subjected to FVP at around 850 °C temperature, only mono- and dibridged compounds (7 and 9) were isolated in overall 20% yield in (13:87) ratio. The structure of the dibridged compound 9 was

Synthesis of novel multifunctional carbazole-based molecules and their thermal, electrochemical and optical properties

• Nuray Altinolcek,
• Ahmet Battal,
• Mustafa Tavasli,
• William J. Peveler,
• Holly A. Yu and
• Peter J. Skabara

Beilstein J. Org. Chem. 2020, 16, 1066–1074, doi:10.3762/bjoc.16.93

• . Carbazole (1) was first brominated with N-bromosuccinimide in dimethylformamide [32][33]. This gave a mixture of mono- and dibromo products 2 and 3. Upon crystallisation 3-bromocarbazole (2) was obtained as white crystals in good yield. 3-Bromocarbazole (2) was then alkylated with 1-bromohexane in 50

• instrument. 3-Bromocarbazole (2): 2 was synthesised as reported previously [32][33]. A solution of N-bromosuccinimide (1.1 g, 5.98 mmol) in dimethylformamide was added dropwise to a solution of carbazole (1, 1 g, 5.96 mmol) in dimethylformamide (15 mL) at 0 °C. The reaction mixture was then stirred at room

Towards triptycene functionalization and triptycene-linked porphyrin arrays

• Gemma M. Locke,
• Keith J. Flanagan and
• Mathias O. Senge

Beilstein J. Org. Chem. 2020, 16, 763–777, doi:10.3762/bjoc.16.70

• dissolved in CHCl3 (150 mL) and degassed for 30 minutes. At 0 °C, N-bromosuccinimide (34 mg, 0.19 mmol) and pyridine (0.1 mL) were added. The reaction was stirred at room temperature for three hours. The progress of the reaction was monitored by TLC and once all starting material had been consumed the