Preparation of imidazo[1,2-a]-N-heterocyclic derivatives with gem-difluorinated side chains

• Layal Hariss,
• Kamal Bou Hadir,
• Mirvat El-Masri,
• Thierry Roisnel,
• René Grée and
• Ali Hachem

Beilstein J. Org. Chem. 2017, 13, 2115–2121, doi:10.3762/bjoc.13.208

• DBU (1,8-diazabicycloundec-7-ene) under the same conditions as mentioned above, the desired imidazopyridine derivative 7a was isolated in 33% yield (Scheme 4). This one-pot process gives an overall yield very close to the two-step reaction (38%). Further, the halogen-substituted substrate 7e appeared

Synthesis of benzothiophene and indole derivatives through metal-free propargyl–allene rearrangement and allyl migration

• Jinzhong Yao,
• Yajie Xie,
• Lianpeng Zhang,
• Yujin Li and
• Hongwei Zhou

Beilstein J. Org. Chem. 2017, 13, 1866–1870, doi:10.3762/bjoc.13.181

• -pot process. Based on our understanding of organosulfur chemistry [20][21][22], we report herein a simple, metal-free method for the formation of benzothiophenes using an intramolecular addition of a sulfur atom (originated from a sulfide) to the electron-deficient allene moiety generated in situ by a

• heterocycles are not well-documented [30][31]. Recently, our group explored the utilization of β-sulfonium carbanions for the preparation of thiophene derivatives [19]. Alkynes were treated with acyl chloride under Sonogashira reaction conditions and the expected β-sulfonium carbanions were obtained in a one

Total syntheses of the archazolids: an emerging class of novel anticancer drugs

• Stephan Scheeff and
• Dirk Menche

Beilstein J. Org. Chem. 2017, 13, 1085–1098, doi:10.3762/bjoc.13.108

• efforts had to be invested, before acid 21 could be efficiently obtained as shown in Scheme 4. Finally, after optimization of a reported procedure [73] the successful route employed a one-pot process involving a sodium hydride-mediated coupling of methyl malonate 19 with iodoform (20) followed by a

A practical and efficient approach to imidazo[1,2-a]pyridine-fused isoquinolines through the post-GBB transformation strategy

• Taofeng Shao,
• Zhiming Gong,
• Tianyi Su,
• Wei Hao and
• Chao Che

Beilstein J. Org. Chem. 2017, 13, 817–824, doi:10.3762/bjoc.13.82

• clinical trials [14]. Multicomponent reactions (MCRs) [15][16][17][18][19], comprising three or more components, provide straightforward approaches to a wide range of heterocycles through the formation of various bonds in a one-pot process. These reactions not only greatly accelerate chemical syntheses [20

Synthesis of 1-indanones with a broad range of biological activity

• Marika Turek,
• Dorota Szczęsna,
• Marek Koprowski and
• Piotr Bałczewski

Beilstein J. Org. Chem. 2017, 13, 451–494, doi:10.3762/bjoc.13.48

• 11 (X = H/OH) and 2-(trifluoromethyl)acrylic acid (10) as a result of a Friedel–Crafts alkylation. An efficient and scalable one-pot process for the preparation of 1-indanones from benzoic acids has been described by Huang et al. [18]. In this synthesis, acyl chlorides formed in the reaction of

• ketoesters 59. The base-mediated cyclization of the latter in the presence of sodium ethoxide led to the formation of the corresponding 1-indanone anions α to carbonyl, which next were alkylated to give 2-substituted 1-indanones 60 (Scheme 20). This one-pot process utilizing a multi-task palladium catalyst

Benzothiadiazole oligoene fatty acids: fluorescent dyes with large Stokes shifts

• Lukas J. Patalag and
• Daniel B. Werz

Beilstein J. Org. Chem. 2016, 12, 2739–2747, doi:10.3762/bjoc.12.270

• same length, but of more extended conjugation we made use of the Horner–Wadsworth–Emmons (HWE) reaction. Phosphonate 4 was reacted with the respective aldehyde 1. In a facile three-step one-pot process the emerging α,β-unsaturated ester 5 was immediately converted to the alcohol 6 in 87% yield in the

Et₃B-mediated and palladium-catalyzed direct allylation of β-dicarbonyl compounds with Morita–Baylis–Hillman alcohols

• Ahlem Abidi,
• Yosra Oueslati and
• Farhat Rezgui

Beilstein J. Org. Chem. 2016, 12, 2402–2409, doi:10.3762/bjoc.12.234

• interesting synthesis of bicyclic dienones in a one-pot process involving the reaction of 2-(acetoxymethyl)cyclohex-2-enone with 1,3-dicarbonyl compounds using K2CO3 as a weak base. Later, Chamakh and Amri [38] have described a one-pot synthesis of (E)-4-alkylidene-2-cyclohexen-1-ones through a cross coupling

Rearrangements of organic peroxides and related processes

• Ivan A. Yaremenko,
• Vera A. Vil’,
• Dmitry V. Demchuk and
• Alexander O. Terent’ev

Beilstein J. Org. Chem. 2016, 12, 1647–1748, doi:10.3762/bjoc.12.162

Aluminacyclopentanes in the synthesis of 3-substituted phospholanes and α,ω-bisphospholanes

• Vladimir A. D’yakonov,
• Alevtina L. Makhamatkhanova,
• Rina A. Agliullina,
• Leisan K. Dilmukhametova,
• Tat’yana V. Tyumkina and
• Usein M. Dzhemilev

Beilstein J. Org. Chem. 2016, 12, 406–412, doi:10.3762/bjoc.12.43

• efficient one-pot process for the synthesis of 3-substituted phospholanes and α,ω-bisphospholanes was developed. The method involves the replacement of aluminium in aluminacyclopentanes, prepared in situ by catalytic cycloalumination of α-olefins and α,ω-diolefins, by phosphorus atoms on treatment with

Recent developments in copper-catalyzed radical alkylations of electron-rich π-systems

• Kirk W. Shimkin and
• Donald A. Watson

Beilstein J. Org. Chem. 2015, 11, 2278–2288, doi:10.3762/bjoc.11.248

• dihydrofurans could be easily converted into furans using DDQ in a one-pot process. In addition to α-bromo esters and ketones, Lei and co-workers have also recently shown that benzylic halides could undergo radical alkenylation via copper catalysis [39]. By exploiting the propensity of benzyl halides to form

Cross-metathesis of polynorbornene with polyoctenamer: a kinetic study

• Yulia I. Denisova,
• Maria L. Gringolts,
• Alexander S. Peregudov,
• Liya B. Krentsel,
• Ekaterina A. Litmanovich,
• Arkadiy D. Litmanovich,
• Eugene Sh. Finkelshtein and
• Yaroslav V. Kudryavtsev

Beilstein J. Org. Chem. 2015, 11, 1796–1808, doi:10.3762/bjoc.11.195

• obtaining unsaturated statistical copolymers, especially promising for the comonomers with considerably different polymerization rates, it would be interesting to also try a one-pot process, in which case the reaction starts with a monomeric mixture of COE and NB. This could eliminate tedious procedures of

Radical-mediated dehydrative preparation of cyclic imides using (NH₄)₂S₂O₈–DMSO: application to the synthesis of vernakalant

• Dnyaneshwar N. Garad,
• Subhash D. Tanpure and
• Santosh B. Mhaske

Beilstein J. Org. Chem. 2015, 11, 1008–1016, doi:10.3762/bjoc.11.113

• convenient one-pot process for the synthesis of miscellaneous cyclic imides in high yields starting from readily available primary amines and cyclic anhydrides. A plausible radical mechanism involving DMSO has been proposed. The application of this facile one-pot imide forming process has been demonstrated

• a convenient one-pot process for the preparation of structurally diverse cyclic imides starting from readily available primary amines and cyclic anhydrides using APS–DMSO as an efficient and novel dehydrating reagent and its application to a drug synthesis. The scope of the developed protocol was

Copper-promoted hydration and annulation of 2-fluorophenylacetylene derivatives: from alkynes to benzo[b]furans and benzo[b]thiophenes

• Yibiao Li,
• Liang Cheng,
• Xiaohang Liu,
• Bin Li and
• Ning Sun

Beilstein J. Org. Chem. 2014, 10, 2886–2891, doi:10.3762/bjoc.10.305

• annulation reactions are iodides and bromides. It is rare to employ aryl fluorides because of their low reactivity [31][32][33]. To extend the application of our strategy of the copper-catalyzed synthesis of heterocycles, we report herein a one-pot process for the synthesis of benzo[b]furans and benzo[b

Application of cyclic phosphonamide reagents in the total synthesis of natural products and biologically active molecules

• Thilo Focken and
• Stephen Hanessian

Beilstein J. Org. Chem. 2014, 10, 1848–1877, doi:10.3762/bjoc.10.195

Primary-tertiary diamine-catalyzed Michael addition of ketones to isatylidenemalononitrile derivatives

• Akshay Kumar and
• Swapandeep Singh Chimni

Beilstein J. Org. Chem. 2014, 10, 929–935, doi:10.3762/bjoc.10.91

• one pot providing Michael product 4a in a good yield of 80% and a high enantioselectivity of 98% ee (Scheme 3). The slightly lower yield of the one-pot process compared to the stepwise process was due to the competing reaction of isatin and acetone to form aldol adduct 5 (8% yield). The reaction

Boron-substituted 1,3-dienes and heterodienes as key elements in multicomponent processes

• Ludovic Eberlin,
• Fabien Tripoteau,
• François Carreaux,
• Andrew Whiting and
• Bertrand Carboni

Beilstein J. Org. Chem. 2014, 10, 237–250, doi:10.3762/bjoc.10.19

• three-component process (Scheme 3) [34]. Extension of this work to the intramolecular version is depicted in Scheme 4. The bicyclic lactone 1 was obtained stereoselectively from a diene-yne in a one-pot process with control of the relative stereochemistry of the five stereogenic centers [35]. Concerning

• diastereomers (Scheme 25). No formation of products resulting from a first cycloaddition of the 1,3-butadienyl moiety was observed when these reactions were conducted in a tandem one-pot process. Various transformations were further carried out as oxidation with hydrogen peroxide or addition to aldehydes that

One-pot cross-enyne metathesis (CEYM)–Diels–Alder reaction of gem-difluoropropargylic alkynes

• Santos Fustero,
• Paula Bello,
• Javier Miró,
• María Sánchez-Roselló,
• Günter Haufe and
• Carlos del Pozo

Beilstein J. Org. Chem. 2013, 9, 2688–2695, doi:10.3762/bjoc.9.305

• fluorinated amides 1 [23][24][25] and compounds 3b,c,e,g,h,j,l,n [29] were previously described. General procedure for the one-pot process. Ethylene was bubbled through a solution of catalyst I (5 mol %) in dry toluene (2.4 mL) for 3 minutes at room temperature in a sealed tube. Substrate 1 (0.12–0.25 mmol

AgOTf-catalyzed one-pot reactions of 2-alkynylbenzaldoximes with α,β-unsaturated carbonyl compounds

• Qiuping Ding,
• Dan Wang,
• Puying Luo,
• Meiling Liu,
• Shouzhi Pu and
• Liyun Zhou

Beilstein J. Org. Chem. 2013, 9, 1949–1956, doi:10.3762/bjoc.9.231

• assumed route, we started to investigate the possibility of this one-pot process. Results and Discussion Initially, a set of experiments was carried out with 2-alkynylbenzaldoxime 1a and methyl methacrylate (2a) as model substrates in the presence of AgOTf (5 mol %). As expected, the reaction proceeded

• that this one-pot process was highly efficient to construct 1-alkylated isoquinolines under very mild conditions. With the optimized conditions in hand, the scope of the procedure was investigated for the reaction of 2-(p-tolylethynyl)benzaldehyde oxime (1b) with a series of α,β-unsaturated carbonyl

Synthesis of enones, pyrazolines and pyrrolines with gem-difluoroalkyl side chains

• Assaad Nasr El Dine,
• Ali Khalaf,
• Danielle Grée,
• Olivier Tasseau,
• Fares Fares,
• Nada Jaber,
• Philippe Lesot,
• Ali Hachem and
• René Grée

Beilstein J. Org. Chem. 2013, 9, 1943–1948, doi:10.3762/bjoc.9.230

• -mediated isomerisation affords enones in fair yields with a gem-difluoroalkyl chain. These derivatives were used to prepare pyrazolines and pyrrolines with the desired gem-difluoroalkyl side chain by cyclocondensations in good yields and with excellent stereoselectivity. A one-pot process was also

An organocatalytic route to 2-heteroarylmethylene decorated N-arylpyrroles

• Alexandre Jean,
• Jérôme Blanchet,
• Jacques Rouden,
• Jacques Maddaluno and
• Michaël De Paolis

Beilstein J. Org. Chem. 2013, 9, 1480–1486, doi:10.3762/bjoc.9.168

•  3, the methodology was next attempted in a one-pot process. Hence, the transformation of aldehyde 1a and imine 2a into pyrrolidine 4a was followed by the introduction of DBU leading to pyrrole 5a in 26% yield. However, proceeding stepwise and isolating the pyrrolidine 4a by a simple filtration on

Carbolithiation of N-alkenyl ureas and N-alkenyl carbamates

• Julien Lefranc,
• Alberto Minassi and
• Jonathan Clayden

Beilstein J. Org. Chem. 2013, 9, 628–632, doi:10.3762/bjoc.9.70

• carbamates were deprotected by treatment with CF3CO2H in a one-pot process, to provide the amines 13a–c in good yields over the two steps (Table 4, entries 4–6). In every case, the amine 13 was obtained as a single diastereomer, which we assume, by analogy with the reactions of the equivalent ureas, to be

Automated three-component synthesis of a library of γ-lactams

• Erik Fenster,
• David Hill,
• Oliver Reiser and
• Jeffrey Aubé

Beilstein J. Org. Chem. 2012, 8, 1804–1813, doi:10.3762/bjoc.8.206

• efficient for parallel synthesis. If N-phenylmaleimide (1{1}) was to be used as a limiting reagent and propionaldehyde (2{1}) and aniline (4{1}) were used (with 4{1} in excess relative to 2{1}), then at the end of the one-pot process we should be left with the desired γ-lactam 6{1,1,1} and with only amines

• parallel library synthesis. Improvements to the chemistry over the previous method include the introduction of asymmetry in the form of an organocatalyzed Michael addition, the removal of the main by-products and excess reagents by using an aqueous acid wash, and the optimization for a one-pot process

• , Germany 10.3762/bjoc.8.206 Abstract A three-component method for the synthesis of γ-lactams from commercially available maleimides, aldehydes, and amines was adapted to parallel library synthesis. Improvements to the chemistry over previous efforts include the optimization of the method to a one-pot

Highly selective synthesis of (E)-alkenyl-(pentafluorosulfanyl)benzenes through Horner–Wadsworth–Emmons reaction

• George Iakobson and
• Petr Beier

Beilstein J. Org. Chem. 2012, 8, 1185–1190, doi:10.3762/bjoc.8.131

• by a two-step one-pot process, involving VNS reaction in DMF with a three-fold excess of t-BuOK (−60 °C, 10 min), followed by the addition of benzaldehyde (1.5 equiv) and warming of the reaction mixture to 50 °C (Table 1, entry 1). These conditions provided the expected 5a in good GCMS yield and high

A general and facile one-pot process of isothiocyanates from amines under aqueous conditions

• Nan Sun,
• Bin Li,
• Jianping Shao,
• Weimin Mo,
• Baoxiang Hu,
• Zhenlu Shen and
• Xinquan Hu

Beilstein J. Org. Chem. 2012, 8, 61–70, doi:10.3762/bjoc.8.6

• particularly for highly electron-deficient substrates. This novel and economical method is suitable for scale-up activities. Keywords: aqueous conditions; cyanuric acid; isothiocyanates; one-pot process; organic synthesis; primary amines; Introduction Isothiocyanates are a class of heteroallenic compounds

Manganese dioxide mediated one-pot synthesis of methyl 9H-pyrido[3,4-b]indole-1-carboxylate: Concise synthesis of alangiobussinine

• Jessica Baiget,
• Sabin Llona-Minguez,
• Stuart Lang,
• Simon P. MacKay,
• Colin J. Suckling and
• Oliver B. Sutcliffe

Beilstein J. Org. Chem. 2011, 7, 1407–1411, doi:10.3762/bjoc.7.164

• analogues containing the carboline heterocyclic moiety. A manganese dioxide mediated one-pot method starting with an activated alcohol and consisting of alcohol oxidation, Pictet–Spengler cyclisation, and oxidative aromatisation, offers a convenient process that allows access to β-carbolines. This one-pot

• process for the preparation of methyl 9H-pyrido[3,4-b]indole-1-carboxylate has subsequently been used as the key step in the synthesis of alangiobussinine and a closely related analogue. Keywords: alkaloid synthesis; carboline; heterocycle; oxidation; tandem reaction; Introduction Carbolines are an