1,2-Naphthoquinone-4-sulfonic acid salts in organic synthesis

• Ruan Carlos B. Ribeiro,
• Patricia G. Ferreira,
• Amanda de A. Borges,
• Luana da S. M. Forezi,
• Fernando de Carvalho da Silva and
• Vitor F. Ferreira

Beilstein J. Org. Chem. 2022, 18, 53–69, doi:10.3762/bjoc.18.5

• quinoid type to study their photophysical properties in solution and in the solid-state, Ooyama and co-workers [106] studied a synthetic route for the preparation of compounds with the tricyclic benzo[c]carbazol-6-one skeleton. The strategy used was through the reaction to β-NQS 18 with a bifunctional

Effect of a twin-emitter design strategy on a previously reported thermally activated delayed fluorescence organic light-emitting diode

• Ettore Crovini,
• Zhen Zhang,
• Yu Kusakabe,
• Yongxia Ren,
• Yoshimasa Wada,
• Bilal A. Naqvi,
• Prakhar Sahay,
• Tomas Matulaitis,
• Stefan Diesing,
• Ifor D. W. Samuel,
• Wolfgang Brütting,
• Katsuaki Suzuki,
• Hironori Kaji,
• Stefan Bräse and
• Eli Zysman-Colman

Beilstein J. Org. Chem. 2021, 17, 2894–2905, doi:10.3762/bjoc.17.197

• marks for the DICzTRZ and ICzTRZ solution-processed OLEDs, respectively. The white star shows the predicted EQE for an evaporated ICzTRZ OLED with the orientation and PLQY taken from ref. [14]. All of the simulated EQEs agree fairly well with the experimental results. Photophysical properties of ICzTRZ

Photophysical, photostability, and ROS generation properties of new trifluoromethylated quinoline-phenol Schiff bases

• Inaiá O. Rocha,
• Yuri G. Kappenberg,
• Wilian C. Rosa,
• Clarissa P. Frizzo,
• Nilo Zanatta,
• Marcos A. P. Martins,
• Isadora Tisoco,
• Bernardo A. Iglesias and
• Helio G. Bonacorso

Beilstein J. Org. Chem. 2021, 17, 2799–2811, doi:10.3762/bjoc.17.191

• more polar solvents (DMSO; 65–150 nm and MeOH; 65–130 nm) than in CHCl3 (59–85 nm). Compounds 3 presented good stability under white-LED irradiation conditions and moderate ROS generation properties were observed. Keywords: photophysical properties; photostability; quinoline; ROS generation; Schiff

• 4-substituted 4-methoxy-1,1,1-trifluoroalk-3-en-2-ones in a two-step reaction procedure and with satisfactory yields of up to 87%. The prepared 6-aminoquinolines presented promising photophysical properties and high thermal stability [14]. In this sense, the present study aimed to synthesize a novel

Visible-light-mediated copper photocatalysis for organic syntheses

• Yajing Zhang,
• Qian Wang,
• Zongsheng Yan,
• Donglai Ma and
• Yuguang Zheng

Beilstein J. Org. Chem. 2021, 17, 2520–2542, doi:10.3762/bjoc.17.169

• cooperative steric hindrance based on bulky substituents at the 2,9-position of the phenanthroline moiety [32][33]. Alternatively, heteroleptic CuI complexes with phenanthroline and bulky chelating phosphine ligands were also synthesized [30][34][35]. The photophysical properties are dramatically modified by

• photophysical properties (Scheme 16). In 2019, Vlla’s group [76] explored the copper-catalyzed alkynylation of dihydroquinoxalin-2-ones 34 with terminal alkynes under irradiation. 4-Benzyl-3,4-dihydroquinoxalin-2(1H)-one 35 was subjected to an oxidation process with a CuII salt to generate a nitrogen radical

Synthesis and investigation on optical and electrochemical properties of 2,4-diaryl-9-chloro-5,6,7,8-tetrahydroacridines

• Najeh Tka,
• Mohamed Adnene Hadj Ayed,
• Mourad Ben Braiek,
• Mahjoub Jabli and
• Peter Langer

Beilstein J. Org. Chem. 2021, 17, 2450–2461, doi:10.3762/bjoc.17.162

• optoelectronic properties [32][35][36][37]. Acridines, as aza-analogues of anthracene have obtained much attention in the field of organic light emitting diodes [38][39][40][41]. While considerable attention has been devoted to the photophysical properties of acridines, not much work has been reported related to

• trifluoromethoxy group (OCF3), a longer reaction time of 6 hours was required to obtain the product 4c in decreased yield (57%). Photophysical properties. We studied the steady-state absorption and emission of selected tetrahydroacridines 4a–d to gain insights into their photophysical properties. The UV–vis

• -positions, the dihedral angles were larger with values of −45.66 and −58.22 degrees, presumably due to steric reasons. These geometries may affect the electronic parameters of tetrahydroacridines 4a–d and particularly their band gap energies. On the other hand, the photophysical properties of products 4e–g

Transition-metal-free intramolecular Friedel–Crafts reaction by alkene activation: A method for the synthesis of some novel xanthene derivatives

• Tülay Yıldız,
• İrem Baştaş and
• Hatice Başpınar Küçük

Beilstein J. Org. Chem. 2021, 17, 2203–2208, doi:10.3762/bjoc.17.142

• anticarcinogenic [1][2], antiviral [3], antibacterial [4][5], and anti-inflammatory [6]. Because of their pharmaceutical activity, they are used in photodynamic therapy [7][8][9]. In addition, they have an important place in the dye industry due to their photochemical and photophysical properties. They are also

Recent advances in the syntheses of anthracene derivatives

• Giovanni S. Baviera and
• Paulo M. Donate

Beilstein J. Org. Chem. 2021, 17, 2028–2050, doi:10.3762/bjoc.17.131

• three linearly fused benzene rings. Because of their extended aromatic and conjugated π-system, anthracene derivatives possess interesting photochemical and photophysical properties [1][2][3], as well as gelling ability [4]. These important properties make them relevant for the development and

2,4-Bis(arylethynyl)-9-chloro-5,6,7,8-tetrahydroacridines: synthesis and photophysical properties

• Najeh Tka,
• Mohamed Adnene Hadj Ayed,
• Mourad Ben Braiek,
• Mahjoub Jabli,
• Noureddine Chaaben,
• Kamel Alimi,
• Stefan Jopp and
• Peter Langer

Beilstein J. Org. Chem. 2021, 17, 1629–1640, doi:10.3762/bjoc.17.115

• ring, is another privileged scaffold which showed interesting biological activities [48][49][50][51][52][53][54]. As a typical example, 9-amino-1,2,3,4-tetrahydroacridine or tacrine was the first drug approved for the treatment of Alzheimer's disease [55][56][57]. Surprisingly, photophysical properties

• studies and as a part of our interest in discovering new organic materials applications [61][62][63], we herein report the synthesis of new 2,4-bis(arylethynyl)-9-chloro-5,6,7,8-tetrahydroacridine derivatives. The investigation of their photophysical properties and theoretical DFT studies were achieved

• containing electron-donating substituents. For example, arylacetylene 3g, bearing a methoxy group, gave the best chemical yield of 93%. However, in case of the electron-attracting trifluoromethyl group (3e), we obtained a somewhat lower, but still good yield of 75%. Photophysical properties As a prominent

Recent advances in the application of isoindigo derivatives in materials chemistry

• Andrei V. Bogdanov and
• Vladimir F. Mironov

Beilstein J. Org. Chem. 2021, 17, 1533–1564, doi:10.3762/bjoc.17.111

• platform (in position 1 and in the aromatic ring) and in the side chain. In the overwhelming majority of works, studies on the photophysical properties of isoindigo derivatives containing a thiophene fragment in position 6 are described. Thus, the authors of References [14][15] obtained a small number of

Substituted nitrogen-bridged diazocines

• Pascal Lentes,
• Jeremy Rudtke,
• Thomas Griebenow and
• Rainer Herges

Beilstein J. Org. Chem. 2021, 17, 1503–1508, doi:10.3762/bjoc.17.107

• acetyl group at the CH2NR-bridge and bromo- or iodo-substituents at the distant phenyl ring. The photophysical properties were investigated in acetonitrile and water. As compared to previous approaches the yields of the intramolecular azo cyclizations were increased (from ≈40 to 60%) using an oxidative

• Diazocines (bridged azobenzenes) are frequently used photoswitches with outstanding photophysical properties. Parent diazocine (CH2–CH2-bridged) exhibits well-separated n–π* transitions, which allow excellent photoconversion between the Z and E configurations ((Z→E)385 nm = 92%, (E→Z)525 nm > 99% in n-hexane

• anhydride of acetic acid and T3P (propanephosphonic acid anhydride). The formylation of NH-diazocines 9a–c was accomplished with chloral [23] under non-acidic conditions. Investigation of the photophysical properties The UV–vis spectra of diazocines 10a–c, and 11a–c were recorded in acetonitrile at 25 °C

Free-radical cyclization approach to polyheterocycles containing pyrrole and pyridine rings

• Ivan P. Mosiagin,
• Olesya A. Tomashenko,
• Dar’ya V. Spiridonova,
• Mikhail S. Novikov,
• Sergey P. Tunik and
• Alexander F. Khlebnikov

Beilstein J. Org. Chem. 2021, 17, 1490–1498, doi:10.3762/bjoc.17.105

• complexes, Au(I) [20], Ir(III) [21] and Eu(III) [22] (Scheme 1). According to the calculations, the isomeric pyrido[2,1-a]pyrrolo[3,4-c]isoquinoline system B (Scheme 1) should have no less interesting photophysical properties [17], than skeleton A but its synthesis is still a challenge. In particular

Design, synthesis and photophysical properties of novel star-shaped truxene-based heterocycles utilizing ring-closing metathesis, Clauson–Kaas, Van Leusen and Ullmann-type reactions as key tools

• Shakeel Alvi and
• Rashid Ali

Beilstein J. Org. Chem. 2021, 17, 1374–1384, doi:10.3762/bjoc.17.96

• -closing metathesis (RCM), Clauson–Kaas and Ullmann-type coupling reactions as key steps. Moreover, we have also assembled some other interesting heterocyclic systems possessing oxazole, imidazole, benzimidazole, and benzoxazole in the framework of truxene. Additionally, the preliminary photophysical

• properties (absorption and emission) for these versatile systems has been revealed. Keywords: Clauson–Kaas reaction; heterocycles; ring-closing metathesis; truxene; Ullmann-type coupling; Van Leusen reaction; Introduction The two-dimensional phenylene-based π-conjugated star-shaped architectures has

• functional materials and the opportunities are now open. Herein, we have assembled diverse truxene scaffolds containing heterocyclic systems involving trimerization, ring-closing metathesis, Clauson–Kaas and Van Leusen reactions as vital steps. Moreover, we have revealed the preliminary photophysical

Synthesis of dibenzosuberenone-based novel polycyclic π-conjugated dihydropyridazines, pyridazines and pyrroles

• Ramazan Koçak and
• Arif Daştan

Beilstein J. Org. Chem. 2021, 17, 719–729, doi:10.3762/bjoc.17.61

• exhibit photophysical properties such as photosensitization [13], fluorescence, and aggregation-induced emission (AIE) [14][15][16]. π-Conjugated polycyclic hydrocarbons (CPHs) containing polycyclic heteroaromatic molecules (PHAs) and aza-polycyclic aromatic hydrocarbons (aza-PAHs) have been attracting

• functional groups at the 3- and 6-positions of s-tetrazine on inverse electron-demand Diels–Alder cycloaddition reactions with a dibenzosuberenone (1) and the photophysical properties of dihydropyridazines. The corresponding pyridazines and pyrroles were obtained from dihydropyridazines. Finally, we

• investigated the photophysical properties of dihydropyridazines. Results and Discussion Synthesis In the first part of the study, we focused on the inverse electron-demand Diels–Alder cycloaddition reactions of dibenzosuberenone (1) with s-tetrazines 2a–l (Figure 2), which were synthesized according to the

Synthesis, structural characterization, and optical properties of benzo[f]naphtho[2,3-b]phosphoindoles

• Mio Matsumura,
• Takahiro Teramoto,
• Masato Kawakubo,
• Masatoshi Kawahata,
• Yuki Murata,
• Kentaro Yamaguchi,
• Masanobu Uchiyama and
• Shuji Yasuike

Beilstein J. Org. Chem. 2021, 17, 671–677, doi:10.3762/bjoc.17.56

• benzonaphthophosphoindole planes (Figure 2b). The photophysical properties of the synthesized phospholes were evaluated. The corresponding data are shown in Figure 3 and Table 2. Parent compound 2 shows the absorption maximum (λmax) at 362 nm, which is longer than that of 2,2′-binaphthyl (λmax = 300 nm) [24]. The

• ]. Unfortunately, the electrochemistry of some compounds could not be determined under the conditions available to us. Therefore, computational investigations are particularly useful for understanding the trends of the electrochemical and photophysical properties of molecular materials. Density functional theory

Exploring the possibility of using fluorine-involved non-conjugated electron-withdrawing groups for thermally activated delayed fluorescence emitters by TD-DFT calculation

• Dongyang Chen and
• Eli Zysman-Colman

Beilstein J. Org. Chem. 2021, 17, 210–223, doi:10.3762/bjoc.17.21

• [28][29]. Results and Discussion We employed density functional theory (DFT) and TD-DFT calculations to predict the photophysical properties of these emitters in order to assess their potential as TADF emitters for OLEDs. All ground-state calculations were performed using PBE0/6-31G(d,p) in the gas

Tuning the solid-state emission of liquid crystalline nitro-cyanostilbene by halogen bonding

• Subrata Nath,
• Alexander Kappelt,
• Matthias Spengler,
• Bibhisan Roy,
• Jens Voskuhl and
• Michael Giese

Beilstein J. Org. Chem. 2021, 17, 124–131, doi:10.3762/bjoc.17.13

• fluoroiodoazobenzenes with varying fluorination degree at the iodobenzene moiety was used to investigate the impact of halogen bonding on the properties of the assemblies. Since cyanostilbene molecules are known to show aggregation-induced emission (AIE) behaviour the photophysical properties of the resulting

• supramolecular entities in the solid state. This effect was also confirmed by the fluorescence behaviour (see paragraph on photophysical properties) and affects mainly the transition from the nematic to crystalline phase. In addition, it was observed that only assemblies with an odd number of carbon atoms in the

• -induced emission properties were combined with alkoxystilbazoles to form hydrogen-bonded mesogens. Since NO2-Cn is known to be fluorescent, we were curious how the formation of the halogen-bonded complexes affects the AIE behaviour of NO2-Cn. Therefore, we studied the photophysical properties of 1:1

Synthesis, crystal structures and properties of carbazole-based [6]helicenes fused with an azine ring

• Daria I. Tonkoglazova,
• Anna V. Gulevskaya,
• Konstantin A. Chistyakov and
• Olga I. Askalepova

Beilstein J. Org. Chem. 2021, 17, 11–21, doi:10.3762/bjoc.17.2

• distortion angle of 50.5° is the smallest in the series. The photophysical properties of the synthesized [6]helicenes were compared to the parent carbazole-based [6]helicene. A spectrophotometric analysis of the quinoxaline-fused helicene displayed a moderate absorption red-shift (19 nm) and reduced optical

• . Sonogashira coupling of compounds 7 with p-tolylacetylene. Acid-induced isomerization of compounds 9 into carbazole-based [6]helicenes 10. Comparison of X-ray data of the carbazole-based [6]helicenes (atomic numbering does not correspond to IUPAC nomenclature). Photophysical properties of carbazole-based [6

Naphthalonitriles featuring efficient emission in solution and in the solid state

• Sidharth Thulaseedharan Nair Sailaja,
• Iván Maisuls,
• Jutta Kösters,
• Alexander Hepp,
• Andreas Faust,
• Jens Voskuhl and
• Cristian A. Strassert

Beilstein J. Org. Chem. 2020, 16, 2960–2970, doi:10.3762/bjoc.16.246

• , the π-donor nature of the substituents on the phenyl ring constitutes the main parameter that influences the photophysical properties, such as excited state lifetimes and photoluminescence quantum yields. Hence, a series of highly luminescent materials from deep blue to red emission depending on

• reports on the DSE behavior of 6,7-disubstituted naphthalene-2,3-dicarbonitrile derivatives so far. Herein we have designed and synthesized donor–acceptor (D–A) naphthalonitriles (NCNs) symmetrically γ-disubstituted with two p-functionalized phenyl moieties and investigated their photophysical properties

• from pure organic solvents to water, in which aggregates are formed. Thus, the photophysical properties of all compounds were investigated in THF and in different ratios of THF/water to study aggregate dispersions at room temperature, and the aggregates were further analyzed by DLS. The results showed

Styryl-based new organic chromophores bearing free amino and azomethine groups: synthesis, photophysical, NLO, and thermal properties

• Anka Utama Putra,
• Deniz Çakmaz,
• Nurgül Seferoğlu,
• Alberto Barsella and
• Zeynel Seferoğlu

Beilstein J. Org. Chem. 2020, 16, 2282–2296, doi:10.3762/bjoc.16.189

• dicyanomethylene group as an acceptor and different para-substituted alkylamines as donors. Morever as a proton-sensitive group a pyridin-2-yl substituent was attached to the para-position of the phenyl moiety in both series of compounds. The photophysical properties of the dyes were examined in various solvents

• azomethine group are one of the most widely used organic dyes because of their easy and cheap synthetic accessibility through various methodologies and suitable photophysical properties. In addition, they exhibit a broad range of biological activities such as antimicrobial, antifungal, antiviral, and

• temperature (Figure 2, Table 1, and Table S1 in Supporting Information File 1). The dyes showed generally good solubility in organic solvents. However, the dyes 8–12 had a low solubility in MeOH. Therefore, the photophysical properties of the dyes 8–12 could not be investigated in this solvent. The Dimroth

Et₃N/DMSO-supported one-pot synthesis of highly fluorescent β-carboline-linked benzothiophenones via sulfur insertion and estimation of the photophysical properties

• Dharmender Singh,
• Vipin Kumar and
• Virender Singh

Beilstein J. Org. Chem. 2020, 16, 1740–1753, doi:10.3762/bjoc.16.146

• excellent light-emitting properties with quantum yields (ΦF) up to 47%. Keywords: benzothiophene; β-carboline; metal-free; photophysical properties; sulfur insertion; Introduction The pyrido[3,4-b]indole moiety, commonly referred as β-carboline, is the core unit of about one quarter of all natural

• measurement of UV–vis absorption and fluorescence emission of the samples, stock solutions of 1.0 mM concentration were prepared using analytical grade CHCl3 as the solvent, and diluted to the final concentration of 4.0 μM. Next, we carefully measured the photophysical properties at room temperature including

• = 18%) in this series (Table 2 and Figure 3). The presence of a benzyl group at R2 (2hA), improved the photophysical properties including a higher quantum yield (ΦF = 47%). With variation of the substituents at the R1 position, a regular pattern of fluorescence was observed, i.e., CO2iPr > CO2Me > H

Clickable azide-functionalized bromoarylaldehydes – synthesis and photophysical characterization

• Dominik Göbel,
• Marius Friedrich,
• Enno Lork and
• Boris J. Nachtsheim

Beilstein J. Org. Chem. 2020, 16, 1683–1692, doi:10.3762/bjoc.16.139

• alkynes, exhibiting different degrees of steric demand, was performed in high efficiency. Finally, we investigated the photophysical properties of the azide-functionalized arenes and their covalently linked triazole derivatives to gain deeper insight towards the effect of these covalent linkers on the

• *) character of the T2 state. Although phosphorescent organic compounds are well investigated with respect to their photophysical properties in the crystalline state, in solution or physically embedded in polymer matrices, there is a significant lack of possibilities [61] for their targeted covalent attachment

• triazole 45 in 83% yield. Photophysical properties Finally, we examined the photophysical properties of both the azides and the triazoles. UV–vis absorption measurements of para-bromobenzaldehyde 3 and ortho-bromobenzaldehyde 4 as well as the corresponding triazoles 33–40 were conducted in chloroform

Heterogeneous photocatalysis in flow chemical reactors

• Christopher G. Thomson,
• Ai-Lan Lee and
• Filipe Vilela

Beilstein J. Org. Chem. 2020, 16, 1495–1549, doi:10.3762/bjoc.16.125

• has shifted the paradigms of photochemistry, opening new avenues of research with safer and scalable processes that can be readily implemented in academia and industry. Current state-of-the-art photocatalysts are homogeneous transition metal complexes that have favourable photophysical properties

• photophysical properties and surface structure of HPCats are more challenging to characterise and requires specialised techniques that are not readily available and often require multidisciplinary collaborations [44]. Additionally, the penetration of light through the bulk of the HPCat is difficult and can

• via physisorption. However, functionalised molecules and ions can strongly bind through chemisorption by covalent bonds, hydrogen bonding, or electrostatic attraction and have been shown to influence the photophysical properties of TiO2, generally causing a bathochromic shift of the absorption

Photocatalysis with organic dyes: facile access to reactive intermediates for synthesis

• Stephanie G. E. Amos,
• Marion Garreau,
• Luca Buzzetti and
• Jerome Waser

Beilstein J. Org. Chem. 2020, 16, 1163–1187, doi:10.3762/bjoc.16.103

Development of fluorinated benzils and bisbenzils as room-temperature phosphorescent molecules

• Shigeyuki Yamada,
• Takuya Higashida,
• Yizhou Wang,
• Masato Morita,
• Takuya Hosokai,
• Kaveendra Maduwantha,
• Kaveenga Rasika Koswattage and
• Tsutomu Konno

Beilstein J. Org. Chem. 2020, 16, 1154–1162, doi:10.3762/bjoc.16.102

• transition-metal-complex-based phosphores for biomedical and technological applications owing to their abundance and nontoxicity. This article discloses the design, synthesis, and photophysical properties of fluorinated benzil and bisbenzil derivatives as potential pure organic room-temperature

• photophysical properties of the benzil and bisbenzil derivatives in toluene at 25 °C showed both fluorescence with a photoluminescence (PL) band at a maximum wavelength (λPL) of around 400 nm and phosphorescence with a PL band at a λPL of around 560 nm. Interestingly, intersystem crossing effectively caused

• examined the synthesis of novel benzil- and bisbenzil-type molecules via oxidation of fluorinated and nonfluorinated bistolane derivatives and evaluated their photophysical properties in detail. Results and Discussion Synthesis This study was initiated with the synthesis of fluorinated bisbenzil

Synthesis and properties of quinazoline-based versatile exciplex-forming compounds

• Rasa Keruckiene,
• Simona Vekteryte,
• Ervinas Urbonas,
• Matas Guzauskas,
• Eigirdas Skuodis,
• Dmytro Volyniuk and
• Juozas V. Grazulevicius

Beilstein J. Org. Chem. 2020, 16, 1142–1153, doi:10.3762/bjoc.16.101

• , bearing a quinazoline unit as the acceptor core and carbazole, dimethyldihydroacridine, or phenothiazine donor moieties, were designed and synthesized in two steps including a facile copper-catalyzed cyclization and a nucleophilic aromatic substitution reaction. The photophysical properties of the

• solid sample of compound 1 (e, inset). Synthesis of quinazoline derivatives 1–3. Conditions: i) ammonium acetate, copper(II) chloride, isopropanol, reflux, 24 h; ii) donor moiety (D), NaH, DMF, reflux, 24 h. Electrochemical characteristics. Photophysical properties of compound 1–3. Funding This project