Clickable azide-functionalized bromoarylaldehydes – synthesis and photophysical characterization

• Dominik Göbel,
• Marius Friedrich,
• Enno Lork and
• Boris J. Nachtsheim

Beilstein J. Org. Chem. 2020, 16, 1683–1692, doi:10.3762/bjoc.16.139

• fluorene showed such a high reactivity that rapid decomposition occurred. However, bromination was conducted by various substitution methods delivering benzyl bromide 24, which upon isolation cyclized to iminium bromide 25 in high yield. To suppress this unexpected cyclization, careful fine-adjustment of

Pauson–Khand reaction of fluorinated compounds

• Jorge Escorihuela,
• Daniel M. Sedgwick,
• Alberto Llobat,
• Mercedes Medio-Simón,
• Pablo Barrio and
• Santos Fustero

Beilstein J. Org. Chem. 2020, 16, 1662–1682, doi:10.3762/bjoc.16.138

• -propargyl-N-[2-(trifluoromethyl)allyl]amides 24 were treated with dicobalt octacarbonyl to afford the cobalt alkyne complex, which was then heated in CH3CN. Under these conditions, trifluoromethylated cyclopentenone 25a was obtained in high yield (81%) and diastereoselectivity (anti/syn = 94:6) (Scheme 11

• complex prepared by treatment of the 1-butyne with Co2(CO)8, afforded the corresponding bicyclic cyclopropane-fused cyclopentenone 74 in high yield and high enantioselectivity (Scheme 43). Conclusion In conclusion, as highlighted in this review, the PKR is still a hot area of chemical research as it

NHC-catalyzed enantioselective synthesis of β-trifluoromethyl-β-hydroxyamides

• Alyn T. Davies,
• Mark D. Greenhalgh,
• Alexandra M. Z. Slawin and
• Andrew D. Smith

Beilstein J. Org. Chem. 2020, 16, 1572–1578, doi:10.3762/bjoc.16.129

• -substituted β-lactone products in a high yield, diastereo-, and enantioselectivity (Figure 2A) [46]. Chi and co-workers have reported limited examples of oxidative [2 + 2] cycloadditions using hydrocinnamaldehyde as an azolium enolate precursor and the NHC precatalyst 2, giving β-lactone products in high

Mechanochemical green synthesis of hyper-crosslinked cyclodextrin polymers

• Alberto Rubin Pedrazzo,
• Fabrizio Caldera,
• Marco Zanetti,
• Silvia Lucia Appleton,
• Nilesh Kumar Dhakar and
• Francesco Trotta

Beilstein J. Org. Chem. 2020, 16, 1554–1563, doi:10.3762/bjoc.16.127

• mechanochemistry [21][29], the synthetic procedure was easy to carry out and gave a high yield (>90%). Good mass balances (68%) were also achieved. The yield was calculated by considering the weight of the dried polymer with respect to the theoretical weight, equal to the sum of β-CD and C=O bridge between β-CDs

In silico rationalisation of selectivity and reactivity in Pd-catalysed C–H activation reactions

• Liwei Cao,
• Mikhail Kabeshov,
• Steven V. Ley and
• Alexei A. Lapkin

Beilstein J. Org. Chem. 2020, 16, 1465–1475, doi:10.3762/bjoc.16.122

• experimental results, see Table 1. In the cases where only one product was predicted it is expected to be isolated in high yield without the need of further purification from any other regioisomer. For the examples where formation of multiple products was expected due to the close energies of the respective

Highly selective Diels–Alder and Heck arylation reactions in a divergent synthesis of isoindolo- and pyrrolo-fused polycyclic indoles from 2-formylpyrrole

• Carlos H. Escalante,
• Eder I. Martínez-Mora,
• Carlos Espinoza-Hicks,
• Alejandro A. Camacho-Dávila,
• Fernando R. Ramos-Morales,
• Francisco Delgado and
• Joaquín Tamariz

Beilstein J. Org. Chem. 2020, 16, 1320–1334, doi:10.3762/bjoc.16.113

• , entries 5–8). An alternative approach for the synthesis of pentacycles 11 would be the Diels–Alder cycloaddition of pyrrolo[2,1-a]isoindoles 18 with maleimides 7. Indeed, the reaction between 18a and 7c successfully proceeded to give a diastereoisomeric mixture of adducts 11b/20 (91:9) in high yield

• ). However, the use of 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) at 25 °C for 48 h led to the aromatized compound 21a in high yield (Table 4, entry 3). Under similar reaction conditions, the series of pyrrolo[3,4-e]indole-1,3-diones 21b–g was resulted in high yields (Table 4, entries 4 and 6–10

Oxime radicals: generation, properties and application in organic synthesis

• Igor B. Krylov,
• Stanislav A. Paveliev,
• Alexander S. Budnikov and
• Alexander O. Terent’ev

Beilstein J. Org. Chem. 2020, 16, 1234–1276, doi:10.3762/bjoc.16.107

• solution ranged from several hours to several days (Scheme 6) [63][64]. Recently, a method for the preparative synthesis of diacetyliminoxyl radical 20 in high yield via the oxidation of diacetyl oxime 19 by Pb(OAc)4 was developed [44] (Scheme 7). The resulting radical can be stored for 2–5 days in the

Synthesis and properties of quinazoline-based versatile exciplex-forming compounds

• Rasa Keruckiene,
• Simona Vekteryte,
• Ervinas Urbonas,
• Matas Guzauskas,
• Eigirdas Skuodis,
• Dmytro Volyniuk and
• Juozas V. Grazulevicius

Beilstein J. Org. Chem. 2020, 16, 1142–1153, doi:10.3762/bjoc.16.101

• three-component method was used for the quinazoline formation by refluxing 2-aminobenzophenone, difluorobenzaldehyde, ammonium acetate, and CuCl2 in ethanol. The synthetic method using a cheap catalyst, easy workup, and the high yield (78%) of quinazoline Q1 makes the compound a promising candidate as

Palladium-catalyzed regio- and stereoselective synthesis of aryl and 3-indolyl-substituted 4-methylene-3,4-dihydroisoquinolin-1(2H)-ones

• Valeria Nori,
• Antonio Arcadi,
• Armando Carlone,
• Fabio Marinelli and
• Marco Chiarini

Beilstein J. Org. Chem. 2020, 16, 1084–1091, doi:10.3762/bjoc.16.95

• pleased to report here that this cascade reaction takes place efficiently, resulting in the regio- and stereoselective formation of the poly-substituted isoquinolinones 4 in good to high yield. Applications of this reaction can be relevant for improvements of structure diversity and fine tuning of the

• -assisted cyclization and reductive elimination from the resulting σ-indolylpalladium complex C (Scheme 5). The reaction led to the stereoselective formation of indole derivatives 6ba–fc (aryl, heteroaryl and vinyl groups were allowed in substrates 5) in good to high yield. The stereochemistry of compounds

Synthesis and anticancer activity of bis(2-arylimidazo[1,2-a]pyridin-3-yl) selenides and diselenides: the copper-catalyzed tandem C–H selenation of 2-arylimidazo[1,2-a]pyridine with selenium

• Mio Matsumura,
• Tsutomu Takahashi,
• Hikari Yamauchi,
• Shunsuke Sakuma,
• Yukako Hayashi,
• Tadashi Hyodo,
• Tohru Obata,
• Kentaro Yamaguchi,
• Yasuyuki Fujiwara and
• Shuji Yasuike

Beilstein J. Org. Chem. 2020, 16, 1075–1083, doi:10.3762/bjoc.16.94

• -arylimidazopyridines 1b–i (2.0 mmol). The 2-phenylimidazopyridines 1b–d afforded the corresponding diselenides 2b–d bearing methoxy, methyl, and fluoro substituents at the 6-position of the respective imidazopyridine rings in good to high yield (77–88%, Figure 3). Furthermore, the 2-arylimidazopyridines 1f–h also

• reaction of the diselenide 2a with 1 equiv of the imidazopyridine 1a gave the selenide 3a in a high yield (reaction ii, Scheme 1). Moreover, the reaction of the selenide 3a with Se powder afforded the diselenide 2a in 62% yield (reaction iii, Scheme 1). These results show that the diselenide 2a and the

Fluorinated phenylalanines: synthesis and pharmaceutical applications

• Laila F. Awad and
• Mohammed Salah Ayoup

Beilstein J. Org. Chem. 2020, 16, 1022–1050, doi:10.3762/bjoc.16.91

• the corresponding (R)-N-acetyl ester 60 with >99.5% ee [50] (Scheme 13). The synthesis of 3-bromo-4-fluoro-(S)-Phe (65) was carried out by reacting 3-bromo-4-fluorobenzaldehyde (61) and N-acetylglycine (51a) to provide intermediate 63 in high yield and without purification. Then, the transition-metal

Copper-catalysed alkylation of heterocyclic acceptors with organometallic reagents

• Yafei Guo and
• Syuzanna R. Harutyunyan

Beilstein J. Org. Chem. 2020, 16, 1006–1021, doi:10.3762/bjoc.16.90

• enantioselective methods for the synthesis of these compounds resulting in high yield and enantioselectivity has proven challenging. As a result, significant effort has been invested into copper-catalysed asymmetric conjugate addition reactions using organometallics. In 2005, Feringa and co-workers reported on the

• the total synthesis of the natural product (+)-myrtine with 14% overall yield (Scheme 1B) [17]. For this application, the highest yield (73%) and enantioselectivity (96% ee) were obtained using the chiral ligand L3 and a copper salt as the catalyst. Despite the fact that examples of high yield and

• catalyst is essential for achieving a high yield as well as a high regio- and enantioselectivity (up to 99% ee). Although organoaluminium, organozinc, and Grignard reagents were all successfully applied in the ACA of 2,3-dehydro-4-piperidones, an introduction of the vinyl group was not successful until

Pd-catalyzed asymmetric Suzuki–Miyaura coupling reactions for the synthesis of chiral biaryl compounds with a large steric substituent at the 2-position

• Yongsu Li,
• Bendu Pan,
• Xuefeng He,
• Wang Xia,
• Yaqi Zhang,
• Hao Liang,
• Chitreddy V. Subba Reddy,
• Rihui Cao and
• Liqin Qiu

Beilstein J. Org. Chem. 2020, 16, 966–973, doi:10.3762/bjoc.16.85

• ], especially on how to obtain the large steric axially chiral biaryl with a high yield and good enantioselectivity through those coupling strategies [13]. Therefore, based on our previous research [60][61][62][63][64][65], we herein present a new method through which those large steric axially chiral biaryl

• heterocyclic group, an electron-rich aromatic or an electron-deficient aromatic group, the reaction always performed well with high yield and good enantioselectivity. We guess that the large sterically hindered π-plane formed between a carbonyl group and a benzene ring is the guarantee of high ee values of the

Recent applications of porphyrins as photocatalysts in organic synthesis: batch and continuous flow approaches

• Rodrigo Costa e Silva,
• Luely Oliveira da Silva,
• Aloisio de Andrade Bartolomeu,
• Timothy John Brocksom and
• Kleber Thiago de Oliveira

Beilstein J. Org. Chem. 2020, 16, 917–955, doi:10.3762/bjoc.16.83

• with singlet oxygen to produce an imine, which was used as a substrate in the Ugi-type reaction. Thus, the oxidations of both 1,2,3,4-tetrahydroisoquinoline and dibenzylamine using TPP were carried out with high yield and selectivity, and the Ugi products were obtained after removal of the solvent and

Aldehydes as powerful initiators for photochemical transformations

• Maria A. Theodoropoulou,
• Nikolaos F. Nikitas and
• Christoforos G. Kokotos

Beilstein J. Org. Chem. 2020, 16, 833–857, doi:10.3762/bjoc.16.76

• loadings, and aldehyde equivalents were tested. Petroleum ether (bp 40–60 °C) afforded a high yield even at 10 mol % catalyst loading. In the absence of light or a catalyst or when the reaction was placed in the dark at 60 °C, the reaction did not proceed. When α,α-disubstituted aldehydes, e.g., cyclohexyl

Efficient synthesis of piperazinyl amides of 18β-glycyrrhetinic acid

• Dong Cai,
• ZhiHua Zhang,
• Yufan Meng,
• KaiLi Zhu,
• LiYi Chen,
• ChangXiang Yu,
• ChangWei Yu,
• ZiYi Fu,
• DianShen Yang and
• YiXia Gong

Beilstein J. Org. Chem. 2020, 16, 798–808, doi:10.3762/bjoc.16.73

• of 18β-glycyrrhetinic acid 9 will undergo N-Boc deprotection and amidation to give compound 11. These results can be used to produce N-substituted piperazines of 18β-glycyrrhetinic acid in high yield, and further to develop more asymmetric piperazinamide derivatives. The structure of the asymmetric

Combining enyne metathesis with long-established organic transformations: a powerful strategy for the sustainable synthesis of bioactive molecules

• Valerian Dragutan,
• Ileana Dragutan,
• Albert Demonceau and
• Lionel Delaude

Beilstein J. Org. Chem. 2020, 16, 738–755, doi:10.3762/bjoc.16.68

• metathesis between the formed propargylic derivative and an appropriate allylic alcohol promoted by the Grubbs second-generation catalyst, finally produced in high yield (85%) the intermediate diene 6, as an essential building block for the southern fragment (Scheme 9). Several other asymmetric transition

Rhodium-catalyzed reductive carbonylation of aryl iodides to arylaldehydes with syngas

• Zhenghui Liu,
• Peng Wang,
• Zhenzhong Yan,
• Suqing Chen,
• Dongkun Yu,
• Xinhui Zhao and
• Tiancheng Mu

Beilstein J. Org. Chem. 2020, 16, 645–656, doi:10.3762/bjoc.16.61

• the reaction and it was found that the optimized proportions of syngas were 5 bar CO and 5 bar H2 (1:1, (Table 3, entries 8–13). Scaled-up experiment Noteworthy, when conducting the reaction at a larger scale (10 mmol), benzaldehyde was obtained with a high yield of 93%, indicating that our system

Design and synthesis of diazine-based panobinostat analogues for HDAC8 inhibition

• Sivaraman Balasubramaniam,
• Sajith Vijayan,
• Liam V. Goldman,
• Xavier A. May,
• Kyra Dodson,
• Sweta Adhikari,
• Fatima Rivas,
• Davita L. Watkins and
• Shana V. Stoddard

Beilstein J. Org. Chem. 2020, 16, 628–637, doi:10.3762/bjoc.16.59

• obstacle was overcome by using a modified Fieser work-up procedure to yield the aldehyde 6 in high yield, 78%. Then, aldehyde 6 was converted to the α,β-unsaturated trans-ester 7 through a Wittig reaction with the phosphorane synthon 8, which was derived from ethyl bromoacetate at 60 °C for 8 h in THF in

Direct borylation of terrylene and quaterrylene

• Haruka Kano,
• Keiji Uehara,
• Kyohei Matsuo,
• Hironobu Hayashi,
• Hiroko Yamada and
• Naoki Aratani

Beilstein J. Org. Chem. 2020, 16, 621–627, doi:10.3762/bjoc.16.58

• -substitution with high yield. To isolate a pure product, the solvent was removed, then the reaction mixture was passed through a silica pad with CH2Cl2, followed by reprecipitation from MeOH. The yield of 2,5,10,13-tetrakis(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)terrylene (TB4) was 56%. Since insoluble

Copper-catalyzed O-alkenylation of phosphonates

• Nuria Vázquez-Galiñanes,
• Mariña Andón-Rodríguez,
• Patricia Gómez-Roibás and
• Martín Fañanás-Mastral

Beilstein J. Org. Chem. 2020, 16, 611–615, doi:10.3762/bjoc.16.56

• readily available, dialkyl phosphonates and alkenyl(aryl)iodonium salts can be combined to form enol phosphonates in high yield and excellent selectivity. Results and Discussion We started our studies by investigating the reaction between diethyl phosphonate 1a and styryl(mesityl)iodonium triflate (2a

A systematic review on silica-, carbon-, and magnetic materials-supported copper species as efficient heterogeneous nanocatalysts in “click” reactions

• Pezhman Shiri and
• Jasem Aboonajmi

Beilstein J. Org. Chem. 2020, 16, 551–586, doi:10.3762/bjoc.16.52

• a reducing agent in a mixture of water and ethanol as the solvent at 85 °C. In continuation, bistriazoles have been produced using 0.4 mol % of 45 and 10 mg sodium ascorbate as a reducing agent in an ethanol/water mixture at 85 °C. All triazole products were produced in good to high yield (Scheme 7

• 24 h to produce a precipitate that was gathered and washed with water and ethanol (Scheme 18). It should be noted that 5.0 mol % of the 3D graphene/Cu nanocomposite 87 were sufficient to generate a high yield of the desired products in EtOH/H2O (1:1) at 70 °C. To screen the recyclability of 87, the

Copper-catalyzed enantioselective conjugate reduction of α,β-unsaturated esters with chiral phenol–carbene ligands

• Shohei Mimura,
• Sho Mizushima,
• Yohei Shimizu and
• Masaya Sawamura

Beilstein J. Org. Chem. 2020, 16, 537–543, doi:10.3762/bjoc.16.50

• methoxy group (in L2), the enantioselectivity drastically dropped to −10% ee, while the yield remained 99% (Table 1, entry 2). Similarly, N,N'-dimesityl-NHC L3, which lacked an oxygen functionality in the N-aryl group, showed poor enantioselectivity (9% ee) with high yield (99% yield, Table 1, entry 3

• ). Thus, the hydroxy group of L1 was essential for the enantioselectivity by the catalyst. When the mesityl group of L1 was changed to a bulkier 2-Me-4,6-Cy2-C6H2 group in L4, the enantioselectivity was markedly improved to 90% ee, with a high yield (97%, Table 1, entry 4). A naphthol substituent on the

Regio- and stereoselective synthesis of new ensembles of diversely functionalized 1,3-thiaselenol-2-ylmethyl selenides by a double rearrangement reaction

• Svetlana V. Amosova,
• Andrey A. Filippov,
• Nataliya A. Makhaeva,
• Alexander I. Albanov and
• Vladimir A. Potapov

Beilstein J. Org. Chem. 2020, 16, 515–523, doi:10.3762/bjoc.16.47

• exhibits unusual properties in nucleophilic reactions. This reagent was obtained [30][31][32] in high yield and with high purity by a one-pot synthesis from divinyl sulfide [33][34][35] and selenium dibromide. The structure of compound 1 suggests the possibility of formation of both seleniranium 2 and

Architecture and synthesis of P,N-heterocyclic phosphine ligands

• Wisdom A. Munzeiwa,
• Bernard Omondi and
• Vincent O. Nyamori

Beilstein J. Org. Chem. 2020, 16, 362–383, doi:10.3762/bjoc.16.35

• hexadentate compound 16 in 73% yield. The synthesis of 19 (Scheme 3B) was achieved in moderate to high yield, firstly, by reacting equimolar amounts of LiPHPh and 2-chloropyridine (17) to give (2-pyridyl)phenylphosphide 18. Secondly, compound 18 was bridged by reaction with a half molar equivalent of