Structural effects of meso-halogenation on porphyrins

• Keith J. Flanagan,
• Maximilian Paradiz Dominguez,
• Zoi Melissari,
• Hans-Georg Eckhardt,
• René M. Williams,
• Dáire Gibbons,
• Caroline Prior,
• Gemma M. Locke,
• Alina Meindl,
• Aoife A. Ryan and
• Mathias O. Senge

Beilstein J. Org. Chem. 2021, 17, 1149–1170, doi:10.3762/bjoc.17.88

• CSD. In this study we have used the Hirshfeld fingerprint plots together with normal-coordinate structural decomposition and determined crystal structures to elucidate the conformation, present intermolecular interactions, and compare respective contacts within the crystalline architectures

• , does not change the core size to any large degree. To further investigate these subtle differences, we can look at their normal-coordinate structural decomposition (NSD) profiles (Figure 7) [28]. It can be observed that in the out-of-plane (OOP) distortion modes, the overall DOOP is almost tripled

Synthesis of multiply fluorinated N-acetyl-D-glucosamine and D-galactosamine analogs via the corresponding deoxyfluorinated glucosazide and galactosazide phenyl thioglycosides

• Vojtěch Hamala,
• Lucie Červenková Šťastná,
• Martin Kurfiřt,
• Petra Cuřínová,
• Martin Dračínský and
• Jindřich Karban

Beilstein J. Org. Chem. 2021, 17, 1086–1095, doi:10.3762/bjoc.17.85

• . Deoxyfluorination at C6 should then afford intermediates 6. Protecting-group manipulation of intermediates 4 and 6 should deliver the required fluoro analogs. The initially contemplated conversion of intermediates 3 into acetates 5 [26], followed by base-catalyzed O-deacetylation, led to substantial decomposition

Recent advances in palladium-catalysed asymmetric 1,4–additions of arylboronic acids to conjugated enones and chromones

• Jan Bartáček,
• Jan Svoboda,
• Martin Kocúrik,
• Jaroslav Pochobradský,
• Alexander Čegan,
• Miloš Sedlák and
• Jiří Váňa

Beilstein J. Org. Chem. 2021, 17, 1048–1085, doi:10.3762/bjoc.17.84

• decomposition over time. Only low to average conversions (up to 81%) and only average enantioselectivities (up to 80% ee; Table 37) were achieved for the studied substrates [62]. One of the most recent contributions to this topic came from the group of Hong and Stoltz in 2020. Here, attention was focused on the

Synthesis of 10-O-aryl-substituted berberine derivatives by Chan–Evans–Lam coupling and investigation of their DNA-binding properties

• Peter Jonas Wickhorst,
• Mathilda Blachnik,
• Denisa Lagumdzija and
• Heiko Ihmels

Beilstein J. Org. Chem. 2021, 17, 991–1000, doi:10.3762/bjoc.17.81

• ). Further attempts to optimize the reaction conditions showed that the reaction mostly led to decomposition of the starting material in polar protic solvents or in the presence of bases or additives other than triethylamine (cf. Supporting Information File 1). However, the product was isolated in a moderate

Highly regio- and stereoselective phosphinylphosphination of terminal alkynes with tetraphenyldiphosphine monoxide under radical conditions

• Dat Phuc Tran,
• Yuki Sato,
• Yuki Yamamoto,
• Shin-ichi Kawaguchi,
• Shintaro Kodama,
• Akihiro Nomoto and
• Akiya Ogawa

Beilstein J. Org. Chem. 2021, 17, 866–872, doi:10.3762/bjoc.17.72

• inhibited the desired phosphinylphosphination (see, alkyne 2f), probably because of the decomposition of Ph2P(O)PPh2. Furthermore, an electron-deficient alkyne such as methyl propiolate (2h) failed to provide the desired adduct (3h) [61]. 3-Phenyl-1-propyne (2i) and cyclohexylacetylene (2j) gave 3i and 3j

• mind, a plausible reaction pathway is shown in Scheme 5. Decomposition of the radical initiator (V-40) generates In•, which attacks selectively at the trivalent phosphorus atom of Ph2P(O)PPh2 to form Ph2P(O)•. Then, Ph2P(O)• adds to the terminal carbon of an alkyne to afford the carbon-centered radical

Microwave-assisted multicomponent reactions in heterocyclic chemistry and mechanistic aspects

• Shivani Gulati,
• Stephy Elza John and
• Nagula Shankaraiah

Beilstein J. Org. Chem. 2021, 17, 819–865, doi:10.3762/bjoc.17.71

• reaction increased with time up to 5 min a further increase in time decreased the yield, attributed to the formation of byproduct and decomposition of product. A plausible mechanism proposed by the authors indicates the Knoevenagel condensation between 5 and 93 to form adduct A and undergo an aza-ene

• functionalized dihydro-1H-pyrazolo[3,4-b]pyridines 99 under the same conditions. Moreover, the reaction preceded well even with other 1,3-diketones along with primary heterocyclic amines (Scheme 36). The modest yields of 99 compared to 97 were reasoned with the decomposition of the amines. Suprisingly, the

• adaptation of conventional strategy delivered the aromatized product in better yields (62–75%). The increased yield was attributed to the lower decomposition observed for the starting material amines. The authors proposed that the final aromatized product was derived from the initial formation of the dihydro

A chromatography-free and aqueous waste-free process for thioamide preparation with Lawesson’s reagent

• Ke Wu,
• Yichen Ling,
• An Ding,
• Liqun Jin,
• Nan Sun,
• Baoxiang Hu,
• Zhenlu Shen and
• Xinquan Hu

Beilstein J. Org. Chem. 2021, 17, 805–812, doi:10.3762/bjoc.17.69

• effective in the decomposition of the inherent stoichiometric six-membered-ring byproduct from the Lawesson’s reagent to a highly polarized diethyl thiophosphonate. The treatment significantly simplified the following chromatography purification of the desired thioamide in a small scale preparation. As

• following the same procedure as described above for the EtOH treatment. To our surprise, the decomposition was much slower as expected (TLC monitoring, see Supporting Information File 1). It was assumed that the ring-opening could be influenced by water or by the in situ-generated thiophosphonic acid. Thus

Effective microwave-assisted approach to 1,2,3-triazolobenzodiazepinones via tandem Ugi reaction/catalyst-free intramolecular azide–alkyne cycloaddition

• Maryna O. Mazur,
• Oleksii S. Zhelavskyi,
• Eugene M. Zviagin,
• Svitlana V. Shishkina,
• Vladimir I. Musatov,
• Maksim A. Kolosov,
• Elena H. Shvets,
• Anna Yu. Andryushchenko and
• Valentyn A. Chebanov

Beilstein J. Org. Chem. 2021, 17, 678–687, doi:10.3762/bjoc.17.57

• significant thermal decomposition of the substrate and/or the product (Table 1, entries 15–17). The varying acetonitrile/water ratio demonstrated no impact on the product yield (Table 1, entries 18 and 19). The reaction was found to proceed well in pure acetonitrile as well (Table 1, entries 20–22) and even

[2 + 1] Cycloaddition reactions of fullerene C₆₀ based on diazo compounds

• Yuliya N. Biglova

Beilstein J. Org. Chem. 2021, 17, 630–670, doi:10.3762/bjoc.17.55

• can be due to a number of reasons. First, two cyclopropanation mechanisms are equally likely in the thermal reaction of diazo compounds with C60 fullerene: a) preliminary carbene formation due to the thermal decomposition of diazo compounds, followed by synchronous addition to the double [6,6]-bond in

• the synthesis of fulleropyrazolines is available, their decomposition has been studied insufficiently. The factors determining the relative stability of monoadducts obtained in reactions of C60 with diazo compounds also remain an open issue. Some of the studies by Wudl and co-workers [108] deal with

Valorisation of plastic waste via metal-catalysed depolymerisation

• Francesca Liguori,
• Carmen Moreno-Marrodán and
• Pierluigi Barbaro

Beilstein J. Org. Chem. 2021, 17, 589–621, doi:10.3762/bjoc.17.53

• usually synthetic polymers recalcitrant to decomposition, and hence liable to accumulate in landfills or the environment when discarded [5][6]. Not all plastics can be reused, and thus having limited economic value [7][8]. Plastics may release toxic compounds dangerous to human health and the habitat [9

• decomposition of the polymeric chain, monomers or oligomers, depending on the waste polymer and the process. The as-obtained compounds can be reused as raw materials for the process industry (hence the term feedstock) to produce chemicals, fuels or other polymers. Thermochemical processes include pyrolysis [55

• ]. However, solvolytic methods are usually not cost-competitive and energy-intensive [86], while they may involve the management of large amounts of noxious solvents and a variety of (decomposition) byproducts [87][88]. Depolymerisation products of course depend on the polymer, the solvent and the reaction

Amino- and polyaminophthalazin-1(2H)-ones: synthesis, coordination properties, and biological activity

• Zbigniew Malinowski,
• Emilia Fornal,
• Agata Sumara,
• Renata Kontek,
• Karol Bukowski,
• Beata Pasternak,
• Dariusz Sroczyński,
• Joachim Kusz,
• Magdalena Małecka and
• Monika Nowak

Beilstein J. Org. Chem. 2021, 17, 558–568, doi:10.3762/bjoc.17.50

• (m/z = 422.3 and 424.3 Da) showed at the first step the loss of an aminoalkyl fragment (C2H3NMe2 = 71.1 Da) to form the ions 9 ⇌ 10 (m/z = 351.2 and 353.2 Da). Because of the lactam–lactim tautomerism the further complex decomposition can proceed through two fragmentation routes: 1) with the loss of

Synthesis of (Z)-3-[amino(phenyl)methylidene]-1,3-dihydro-2H-indol-2-ones using an Eschenmoser coupling reaction

• Lukáš Marek,
• Lukáš Kolman,
• Jiří Váňa,
• Jan Svoboda and
• Jiří Hanusek

Beilstein J. Org. Chem. 2021, 17, 527–539, doi:10.3762/bjoc.17.47

• complete decomposition giving mainly the isoindigo derivatives 9a–e. Similar issues were observed when the secondary or tertiary thiobenzamides 3a–i or 4a–c were used. The following Scheme 2 summarizes the main possible reaction routes starting from 3-bromooxindoles 1a–e and various primary, secondary, and

A new and efficient methodology for olefin epoxidation catalyzed by supported cobalt nanoparticles

• Lucía Rossi-Fernández,
• Viviana Dorn and
• Gabriel Radivoy

Beilstein J. Org. Chem. 2021, 17, 519–526, doi:10.3762/bjoc.17.46

• (Table 1, entries 1–4), only the CoNPs/MgO catalyst gave a modest 28% conversion to the desired epoxide 2a (Table 1, entry 2) together with undesired formamide byproducts, probably coming from DMF decomposition under the reaction conditions. Then, we decided to use acetontrile (MeCN) as the solvent with

Synthesis of trifluoromethyl ketones by nucleophilic trifluoromethylation of esters under a fluoroform/KHMDS/triglyme system

• Yamato Fujihira,
• Yumeng Liang,
• Makoto Ono,
• Kazuki Hirano,
• Takumi Kagawa and
• Norio Shibata

Beilstein J. Org. Chem. 2021, 17, 431–438, doi:10.3762/bjoc.17.39

• CF3− to K+, preventing decomposition into CF2 and KF. The isolated CF3 is rather naked with a highly nucleophilic character, which is suitable for nucleophilic trifluoromethylation reactions. The K+ and glyme combination is particularly useful for the nucleophilic trifluoromethylation of carbonyl

• . Trifluoromethyl ketones. a) Hydrolysis of trifluoromethyl ketones. b) Selected examples of biologically active trifluoromethyl ketones. Chemistry of the CF3 anion generated from HCF3. a) Decomposition of the trifluoromethyl anion to difluorocarbene and fluoride. b) A hemiaminaloate adduct of CF3 anion to DMF. c

CF₃-substituted carbocations: underexploited intermediates with great potential in modern synthetic chemistry

• Anthony J. Fernandes,
• Armen Panossian,
• Bastien Michelet,
• Agnès Martin-Mingot,
• Frédéric R. Leroux and
• Sébastien Thibaudeau

Beilstein J. Org. Chem. 2021, 17, 343–378, doi:10.3762/bjoc.17.32

• N2) [63] is the driving force for the decomposition of 47, generating collaterally bis(trifluoromethyl)-substituted carbenium ion intermediate 48fOTf. Finally, triflate 45f is formed after ion pair recombination (Scheme 11). Similar experiments conducted with 18O-labeled 44 confirmed the proposed

• -tert-butyl alcohol (Scheme 14) [63]. No further decomposition was observed in this case, suggesting that the especially challenging perfluoro-tert-butylcarbenium ion 55 cannot be generated. Highly deactivated bis(trifluoromethyl)-substituted carbenium ions and their precursors were also explored in

The preparation and properties of 1,1-difluorocyclopropane derivatives

• Kymbat S. Adekenova,
• Peter B. Wyatt and
• Sergazy M. Adekenov

Beilstein J. Org. Chem. 2021, 17, 245–272, doi:10.3762/bjoc.17.25

• the avoidance of gaseous byproducts [49]. Other mild sources of difluorocarbene include trifluoro(trifluoromethyl)silane (CF3SiF3 [50]) and difluorotris(trifluoromethyl)phosphorane ((CF3)3PF2 [51]). Difluorocarbene generation through the decomposition of hexafluoropropylene oxide upon heating

• : Hexafluoropropylene oxide (HFPO, 41) is an effective and cheap reagent for the difluorocyclopropanation of simple alkyl- and aryl-substituted alkenes [52]. It undergoes decomposition to form difluorocarbene (Scheme 16) at temperatures above 170 °C either under autoclave conditions or by gas-phase co-pyrolysis [53

• Difluorocarbene methods with organometallic sources Decomposition of phenyl(trifluoromethyl)mercury in the presence of sodium iodide: The preparation of difluorocyclopropanes using phenyl(trifluoromethyl)mercury (PhHgCF3, 45, Seyferth's reagent) as a source of difluorocarbene, results in good yields of the

Selective synthesis of α-organylthio esters and α-organylthio ketones from β-keto esters and sodium S-organyl sulfurothioates under basic conditions

• Jean C. Kazmierczak,
• Roberta Cargnelutti,
• Thiago Barcellos,
• Claudio C. Silveira and
• Ricardo F. Schumacher

Beilstein J. Org. Chem. 2021, 17, 234–244, doi:10.3762/bjoc.17.24

• -one (4f). Unfortunately, after conducting this reaction, only trace amounts of 4f were obtained, and decomposition of the carbonyl compounds was observed. Thereafter, we explored the potential of the methodology for the ethyl 3-oxo-3-arylpropanoates 1l and 1m. When substrate 1l, containing an

Au(III) complexes with tetradentate-cyclam-based ligands

• Ann Christin Reiersølmoen,
• Thomas N. Solvi and
• Anne Fiksdahl

Beilstein J. Org. Chem. 2021, 17, 186–192, doi:10.3762/bjoc.17.18

• , due to sample decomposition. Attempts to obtain crystals for X-ray analysis by slow diffusion of n-pentane into a DCM solution of the complexes were unsuccessful. Catalytic activity For evaluation of the catalytic ability of the new Au(III) complexes, alkyne carboalkoxylation [47][48] and

• salts resulted in decomposition of the Au(III) complex. Consequently, the counter-anion exchange method was not possible. Since the ligand 6b seems to de-coordinate, resulting in the cyclam Au(III) complex not being the active catalyst, and the presence of chloride anions, the activity of the 6b-Au(III

• . Although the decomposition of complex 6b-Au(III) resulted in the rapid conversion into products, it is undesirable, as the impact of the ligand on the reaction selectivity is lost. This different stability, caused by small differences in the design of the two cyclam ligands, is in accordance with the

Insight into functionalized-macrocycles-guided supramolecular photocatalysis

• Minzan Zuo,
• Krishnasamy Velmurugan,
• Kaiya Wang,
• Xueqi Tian and
• Xiao-Yu Hu

Beilstein J. Org. Chem. 2021, 17, 139–155, doi:10.3762/bjoc.17.15

• ] (“Cyclodextrin–gold nanocluster decorated TiO2 enhances photocatalytic decomposition of organic pollutants” by H. Zhu et al., J. Mater. Chem. A vol. 6, © 2017); permission conveyed through Copyright Clearing Center, Inc. Visible-light-driven conversion of benzyl alcohol to H2 and a vicinal diol or to H2 and

Facile preparation and conversion of 4,4,4-trifluorobut-2-yn-1-ones to aromatic and heteroaromatic compounds

• Takashi Yamazaki,
• Yoh Nakajima,
• Minato Iida and
• Tomoko Kawasaki-Takasuka

Beilstein J. Org. Chem. 2021, 17, 132–138, doi:10.3762/bjoc.17.14

• oxidation of the other substrates 1 was performed under similar reaction condition, the results of which are summarized in Table 1. We reported the yield as determined by 19F NMR spectroscopy rather than after purification because of the inherent instability of 2 on silica gel, causing partial decomposition

Direct synthesis of anomeric tetrazolyl iminosugars from sugar-derived lactams

• Michał M. Więcław and
• Bartłomiej Furman

Beilstein J. Org. Chem. 2021, 17, 115–123, doi:10.3762/bjoc.17.12

• Ugi–azide reaction variant described in this work. We suppose that after reduction of amide I by Schwartz’s reagent, complex II undergoes a slow, spontaneous decomposition, yielding imine III. III then reacts with TMSN3, which acts as both, an imine activator and an azide anion source. Complex IV

• spontaneous decomposition of the zirconium complex INT-1-A to the free imine species INT-3. This process is much more likely to occur via the 5-membered cyclic transition state TS-1-A than the alternative TS-1-B, as the energy barrier of 60.1 kcal·mol−1 is definitely too high for the reaction to take place

• , even at an elevated temperature. Path A with a barrier of 22.6 kcal·mol−1 is certainly more feasible. We assume that the Cp2Zr(OH)Cl species just leaves the initial complex, as this seems to be the simplest possibility in absence of any Lewis acid which could catalyze this decomposition. Scheme 9 shows

Benzothiazolium salts as reagents for the deoxygenative perfluoroalkylthiolation of alcohols

• Armin Ariamajd,
• Nils J. Gerwien,
• Benjamin Schwabe,
• Stefan Dix and
• Matthew N. Hopkinson

Beilstein J. Org. Chem. 2021, 17, 83–88, doi:10.3762/bjoc.17.8

• fluoride species, which can subsequently react with the alcohol, delivering thionoester 4. β-Fluoride elimination is a known decomposition pathway of −SCF3 and has even been exploited in synthetic trifluoromethylthiolation and fluorination processes [32][33][34]. The formation of the side-product 4a could

All-carbon [3 + 2] cycloaddition in natural product synthesis

• Zhuo Wang and
• Junyang Liu

Beilstein J. Org. Chem. 2020, 16, 3015–3031, doi:10.3762/bjoc.16.251

• authors mentioned that the employment of the previously reported conditions for the radical cyclization in the synthesis of marcfortine B (8) led to the decomposition of the starting material. It was suggested that the MOM group of 80 may contribute to undesired side reactions. Synthesis of marcfortine C

Controlled decomposition of SF₆ by electrochemical reduction

• Sébastien Bouvet,
• Bruce Pégot,
• Stéphane Sengmany,
• Erwan Le Gall,
• Eric Léonel,
• Anne-Marie Goncalves and
• Emmanuel Magnier

Beilstein J. Org. Chem. 2020, 16, 2948–2953, doi:10.3762/bjoc.16.244

• expensive methods requiring a large input of energy (high temperature, high pressure). Many SF6 decomposition strategies so far developed use photoreduction, plasma discharges or even photolysis processes [10][11]. Beyond the energetic high cost of such processes, they produce side products that are highly

• reactive, corrosive and toxic [12]. Recent and really impressive works were devoted to the decomposition of sulfur hexafluoride using stoichiometric or catalytic amounts of metals (Rh, Ni, Pt) [13][14][15][16]. Organic derivatives (phosphines or bipyridine) proved efficient tools for the selective

• knowledge, electrochemical reduction of SF6 has not yet been disclosed. The decomposition of sulfur hexafluoride by electrochemistry can nevertheless be a suitable answer and interesting alternative to the previous expensive options. In this article, we describe the electrochemical behavior of sulfur

A novel and robust heterogeneous Cu catalyst using modified lignosulfonate as support for the synthesis of nitrogen-containing heterocycles

• Bingbing Lai,
• Meng Ye,
• Ping Liu,
• Minghao Li,
• Rongxian Bai and
• Yanlong Gu

Beilstein J. Org. Chem. 2020, 16, 2888–2902, doi:10.3762/bjoc.16.238

• of absorbed water [20][21]. Two sharp weight losses were identified on the TG curves as temperature rose. The first loss within 224–327 °C may be caused by decomposition and elimination of the –SO3Na groups and the introduced small organic species in the materials [22], while the second loss at

• higher temperature of 327–448 °C may be attributed to decomposition of the support skeleton [23]. The thermal stability of referential Resin-Cu catalyst was also investigated by TG analysis (Supporting Information File 1, Figure S3), showing a high thermal stability as well [24][25][26]. The above