Metal catalyst-free N-allylation/alkylation of imidazole and benzimidazole with Morita–Baylis–Hillman (MBH) alcohols and acetates

• Olfa Mhasni,
• Jalloul Bouajila and
• Farhat Rezgui

Beilstein J. Org. Chem. 2023, 19, 1251–1258, doi:10.3762/bjoc.19.93

• bifonazole have become well-established drugs for the treatment of numerous mycotic infections (Figure 1) [9][10]. Therefore, the development of new methods for the preparation of such compounds is highly required. The MBH acetates, instead of the corresponding alcohols, have been extensively used as

• these substrates and the formation of water as the sole non-toxic byproduct in the reaction [11]. In general, the previous methods for the amination of MBH alcohols needed catalysts or additives such as FeCl3 [12][13], In(OTf)3 [14], MoCl5 [15], AuCl3 [16], and I2 [17] as Lewis acids. Alternatively

Acetaldehyde in the Enders triple cascade reaction via acetaldehyde dimethyl acetal

• Alessandro Brusa,
• Debora Iapadre,
• Maria Edith Casacchia,
• Alessio Carioscia,
• Giuliana Giorgianni,
• Giandomenico Magagnano,
• Fabio Pesciaioli and
• Armando Carlone

Beilstein J. Org. Chem. 2023, 19, 1243–1250, doi:10.3762/bjoc.19.92

• complete enantiocontrol (Scheme 1). This elegantly designed example established a new direction in asymmetric aminocatalysis, leading to an impressive growth of methods based on organocascade processes [8][10][13][14][15][16]. The experimental simplicity of the strategy offers the potential of rapidly

Radical ligand transfer: a general strategy for radical functionalization

• David T. Nemoto Jr,
• Kang-Jie Bian,
• Shih-Chieh Kao and
• Julian G. West

Beilstein J. Org. Chem. 2023, 19, 1225–1233, doi:10.3762/bjoc.19.90

• challenging-to-generate “uncontrollable” species prone to side reactions to versatile reactive intermediates enabling construction of myriad C–C and C–X bonds. This maturation of free radical chemistry has been enabled by several advances, including the proliferation of efficient radical generation methods

• , such as hydrogen atom transfer (HAT), alkene addition, and decarboxylation. At least as important has been innovation in radical functionalization methods, including radical–polar crossover (RPC), enabling these intermediates to be engaged in productive and efficient bond-forming steps. However, direct

• driven by several key features of RLT catalysis, including the ability to form diverse bonds (including C–X, C–N, and C–S), the use of simple earth abundant element catalysts, and the intrinsic compatibility of this approach with varied radical generation methods, including HAT, radical addition, and

Unravelling a trichloroacetic acid-catalyzed cascade access to benzo[f]chromeno[2,3-h]quinoxalinoporphyrins

• Chandra Sekhar Tekuri,
• Pargat Singh and
• Mahendra Nath

Beilstein J. Org. Chem. 2023, 19, 1216–1224, doi:10.3762/bjoc.19.89

• study is potentially useful for the development of highly conjugated π-electron rich porphyrinoids with improved light harvesting properties. Experimental Materials and instrumentation methods All reagents and solvents used in this study were purchased from Sigma-Aldrich (Merck) and were used as

Enabling artificial photosynthesis systems with molecular recycling: A review of photo- and electrochemical methods for regenerating organic sacrificial electron donors

• Grace A. Lowe

Beilstein J. Org. Chem. 2023, 19, 1198–1215, doi:10.3762/bjoc.19.88

• highlights photo- and electrochemical methods for recycling amines and NADH analogues that can be used as electron donors in artificial photosynthesis. Important properties of sacrificial donors and recycling strategies are also discussed. Compounds from other fields, such as redox flow batteries and

• , inorganic Z-schemes have used cobalt complexes and polyoxometalates to shuttle electrons between water oxidation and carbon dioxide reduction photocatalysts [2][4]. However, the photocatalysts of these systems are usually first developed separately with sacrificial electron donors. Other methods for

• electrochemical methods. However, in the short term this means that there is an opportunity, or unmet need, for simple photochemical systems that generate storable fuel/feedstocks without a grid connection or similar infrastructure. Consequently, this potential gap in the solar fuel/feedstock market makes it more

Cyanothioacetamides as a synthetic platform for the synthesis of aminopyrazole derivatives

• Valeriy O. Filimonov,
• Alexandra I. Topchiy,
• Vladimir G. Ilkin,
• Tetyana V. Beryozkina and
• Vasiliy A. Bakulev

Beilstein J. Org. Chem. 2023, 19, 1191–1197, doi:10.3762/bjoc.19.87

• potential of such compounds. The most common method for obtaining 3,5-disubstituted pyrazoles is the cyclocondensation of 1,3-bielectrophilic reagents with hydrazine, which acts as a 1,2-dinucleophile [15][16]. It is worthy to note that a small number of methods for the synthesis of 3,5-diaminopyrazoles are

• presented in the literature. These syntheses are multistage [17] or are essentially a transformation of the structure of the previously obtained pyrazoles [18] (Scheme 1A). Methods for the synthesis of pyrazoles containing thioamide and amino groups in a molecule are even less developed than methods for

• obtaining 3,5-diaminopyrazoles, and presented in the literature by two examples only [19][20][21] (Scheme 1B). Thus, the development of effective methods for the production of 3,5-diaminopyrazoles and 3,5-diaminothiocarbamoylpyrazoles is an actual task which was chosen the aim of current study. Here, we

Exploring the role of halogen bonding in iodonium ylides: insights into unexpected reactivity and reaction control

• Carlee A. Montgomery and
• Graham K. Murphy

Beilstein J. Org. Chem. 2023, 19, 1171–1190, doi:10.3762/bjoc.19.86

• have been evaluated extensively through both qualitative and quantitative means. Methods of evaluation have included X-ray crystallography and spectroscopy (e.g., microwave, IR, Raman, NMR, NQR), as well as through computational determination of their electrostatic VS,max potentials (Figure 2), their

• positively charged. Halogen-bonded adducts of these have also been observed, which further illustrated the existence and properties of σ-holes in such HVI compounds. For example, I-7-pyr was characterized by X-ray crystallography and by computational methods, where molecular orbital (MO) analysis showed that

Two new lanostanoid glycosides isolated from a Kenyan polypore Fomitopsis carnea

• Winnie Chemutai Sum,
• Sherif S. Ebada,
• Didsanutda Gonkhom,
• Cony Decock,
• Rémy Bertrand Teponno,
• Josphat Clement Matasyoh and
• Marc Stadler

Beilstein J. Org. Chem. 2023, 19, 1161–1169, doi:10.3762/bjoc.19.84

• solid-state cultivated cultures of F. carnea, with forpinioside B (1) proving to be a potential antimicrobial. In addition, our findings provide significant insights to decipher the SARs of the lanostanoid triterpenoids. Experimental General experimental methods The samples were analyzed on an amaZon

New one-pot synthesis of 4-arylpyrazolo[3,4-b]pyridin-6-ones based on 5-aminopyrazoles and azlactones

• Vladislav Yu. Shuvalov,
• Ekaterina Yu. Vlasova,
• Tatyana Yu. Zheleznova and
• Alexander S. Fisyuk

Beilstein J. Org. Chem. 2023, 19, 1155–1160, doi:10.3762/bjoc.19.83

• -aryl-substituted derivatives should be distinguished, exhibiting antiviral [13] and anti-inflammatory properties [14], being modulators of estrogen-related receptor alpha [15], JAK1 kinase inhibitor [16], GSK3 [17] and GyrB [8] inhibitors (Figure 1). Despite the high demand, their synthesis methods are

• are also low in two-stage synthesis methods. The first of them is based on the three-component condensation of aminopyrazoles, Meldrum's acid, and aromatic aldehydes, followed by the oxidation of the intermediate with DDQ [13][16][19] (method B). The second one includes the reaction of an aromatic

• compounds 4a–i, 9a, and 10a in EtOH. Methods for the synthesis of 4-arylpyrazolo[3,4-b]pyridin-6-ones. One-pot synthesis of 4-arylpyrazolo[3,4-b]pyridin-6-ones 4a–i, 9a, and 10a. Optimization of reaction conditionsa. Data of absorption and fluorescence spectra of compounds 4a–i, 9a, and 10a.a Supporting

Selective and scalable oxygenation of heteroatoms using the elements of nature: air, water, and light

• Damiano Diprima,
• Hannes Gemoets,
• Stefano Bonciolini and
• Koen Van Aken

Beilstein J. Org. Chem. 2023, 19, 1146–1154, doi:10.3762/bjoc.19.82

• running the process in continuous flow [5][6][7][8]. Moreover, flow reactors that provide intense mixing can overcome the gas–liquid mass transfer limitations typical of batch reactions and improve productivity. Several studies have demonstrated the scalability and safety of such methods for the oxidation

• [23][24] and methods for oxidation such as photochemistry, or electrochemistry have been developed [2][25]. However, low selectivity and the need for appropriate catalysts that are stable, cost-effective, and easy to remove remain problematic. Recently, catalyst-free procedures using O2 or air have

Photoredox catalysis harvesting multiple photon or electrochemical energies

• Mattia Lepori,
• Simon Schmid and
• Joshua P. Barham

Beilstein J. Org. Chem. 2023, 19, 1055–1145, doi:10.3762/bjoc.19.81

• ). In a complementary manner, *PC generates A•− and D•+ within a reductive quenching cycle via SET reactions. The milder conditions that PRC enjoys to access potent redox agents guarantees sustainable and safer processes when compared to classical methods of equivalent redox power. For example, in the

• conditions are available via PRC (vide infra). However, even if PRC provides elegant methods to circumvent these issues, it comes with its own set of limitations. In particular, the accessible energy for photocatalytically-driven transformations is generally limited by the energy of a single visible light

• methods for SET chemistry. In the context of synthetic molecular photoelectrochemistry, there are various sub-fields classified depending on how the electrochemical and photochemical steps interplay in the mechanism. This Review’s main focus is on electrochemically mediated photoredox catalysis (e-PRC

The effect of dark states on the intersystem crossing and thermally activated delayed fluorescence of naphthalimide-phenothiazine dyads

• Liyuan Cao,
• Xi Liu,
• Xue Zhang,
• Jianzhang Zhao,
• Fabiao Yu and
• Yan Wan

Beilstein J. Org. Chem. 2023, 19, 1028–1046, doi:10.3762/bjoc.19.79

• emitters [32][33]. However, the most popular optical spectroscopic methods previously used in this area, such as the very often used transient photoluminescence spectral measurement or the luminescence lifetime measurement, are unable to detect the dark states of the TADF emitters, i.e., the 3LE and 3CS

• methods (the UV–vis absorption and fluorescence emission spectra, etc.), and herein we also demonstrated that transient absorption spectra (femtosecond/nanosecond transient absorption spectra) can be used to study the TADF properties, for instance by monitoring the dark states. In addition, we show that

• . Experimental General methods All the chemicals used in synthesis are analytical pure and were used as received without further purification. UV–vis absorption spectra were measured on a UV-2550 Shimadzu spectrophotometer. Fluorescence spectra were recorded with an FS5 spectrofluorometer (Edinburgh instruments

Copper-catalyzed N-arylation of amines with aryliodonium ylides in water

• Kasturi U. Nabar,
• Bhalchandra M. Bhanage and
• Sudam G. Dawande

Beilstein J. Org. Chem. 2023, 19, 1008–1014, doi:10.3762/bjoc.19.76

• anti-inflammatory agent (Figure 1). Owing the importance of arylamines and their biological significance, the surge of development of innovative methods for their synthesis has been always an area of interest [12]. Specifically, the metal-mediated arylation reactions have witnessed significant

• bond formation. However, these methods suffer from limitations such as moisture sensitivity, the requirement of specific ligands, and the use of expensive palladium catalysts [17]. Also, Chan Lam, Evans, and other research groups have developed copper-catalyzed C–N bond formation reactions by careful

• halogenated solvents. Moreover, the use of economic and eco-friendly solvents such as water have always been an attractive area in organic synthesis. Therefore, in continuation of our efforts towards the development of sustainable methods for the synthesis of valuable organic molecules, herein, we report a

Five new sesquiterpenoids from agarwood of Aquilaria sinensis

• Hong Zhou,
• Xu-Yang Li,
• Hong-Bin Fang,
• He-Zhong Jiang and
• Yong-Xian Cheng

Beilstein J. Org. Chem. 2023, 19, 998–1007, doi:10.3762/bjoc.19.75

• absolute configurations, were identified by comprehensive spectroscopic analyses and computational methods. Inspired by our previous study on the same kinds of skeletons, we speculated that the new compounds have anticancer and anti-inflammatory activities. The results did not show any activity, but they

• methods were used to purify the extract, such as MCI gel CHP 20, silica gel column, vacuum liquid chromatography, and semi-preparative HPLC purification, to obtain pure compounds. A total of ten compounds, including five new eudesmane-type sesquiterpenoids (1–5), and five known compounds were identified

Synthesis of tetrahydrofuro[3,2-c]pyridines via Pictet–Spengler reaction

• Elena Y. Mendogralo and
• Maxim G. Uchuskin

Beilstein J. Org. Chem. 2023, 19, 991–997, doi:10.3762/bjoc.19.74

• relatively selective α2-adrenoceptor antagonist [5]. Despite the simplicity of the tetrahydrofuro[3,2-c]pyridine core, only limited approaches for the synthesis of this subclass of heterocycles using furan derivatives as starting compounds have been described [6][7][8]. The first group of methods is based on

• rearrangement to a more stable benzhydryl-type cation resulting in the formation of isomeric products. In an alternative group of methods, more accessible 2-substituted furans are used as starting compounds. For example, a construction of tetrahydrofuro[3,2-c]pyridines based on the Pictet–Spengler reaction [17

The unique reactivity of 5,6-unsubstituted 1,4-dihydropyridine in the Huisgen 1,4-diploar cycloaddition and formal [2 + 2] cycloaddition

• Xiu-Yu Chen,
• Hui Zheng,
• Ying Han,
• Jing Sun and
• Chao-Guo Yan

Beilstein J. Org. Chem. 2023, 19, 982–990, doi:10.3762/bjoc.19.73

• -dihydropyridines derived from the condensation of acetylacetone also afforded the expected product 4o in 65% yield. The chemical structures of the obtained isoquinoline[2,1-h][1,7]naphthyridines 4a–o were fully characterized by various spectroscopy methods and further confirmed by determination of the single

• structures of both bicyclic compounds 5a–o and 6a–o were fully characterized by various spectroscopy methods. The single crystal structures of compounds 5a (Figure 2) and 6f (Figure 3) were successfully determined by X-ray diffraction analysis. From Figure 2 (compound 5a), it can be seen that the

Clauson–Kaas pyrrole synthesis using diverse catalysts: a transition from conventional to greener approach

• Dileep Kumar Singh and
• Rajesh Kumar

Beilstein J. Org. Chem. 2023, 19, 928–955, doi:10.3762/bjoc.19.71

• , vitamin B12, porphyrins, chlorins, and bacteriochlorins also contain pyrroles rings (Figure 1). For the synthesis of pyrrole derivatives, many classic methods have been used, including Knorr pyrrole synthesis [29][30], Paal–Knorr synthesis [31][32][33], Hantzsch pyrrole synthesis [34][35][36], Clauson

• solvent and reaction time. The environmental impacts are manifold, including excessive utilization of organic solvents, high-temperature reactions, the production of hazardous byproducts, and by the use of traditional purification techniques. Therefore, green chemistry methods in Clauson–Kaas synthesis

• work-up of intermediate H (Scheme 2b). Review Conventional method for the Clauson–Kaas synthesis of N-substituted pyrroles This section describes Clauson–Kaas pyrrole syntheses using traditional methods, such as Brønsted acid or Lewis acid-catalyzed reactions in various organic solvents at higher

Photoredox catalysis enabling decarboxylative radical cyclization of γ,γ-dimethylallyltryptophan (DMAT) derivatives: formal synthesis of 6,7-secoagroclavine

• Alessio Regni,
• Francesca Bartoccini and
• Giovanni Piersanti

Beilstein J. Org. Chem. 2023, 19, 918–927, doi:10.3762/bjoc.19.70

• ground state catalyst [21][22][23][24][25][26]. While early research has focused on methods for the functionalization of relatively simple hydrocarbons [27][28][29][30], developments in photoredox catalysis have gained traction recently as a viable strategy for the total synthesis of natural products [31

• position via a sequential electron transfer–proton transfer (ET/PT) [52][53][54][55][56][57][58][59]. With our ongoing interest of establishing new methods for the asymmetric synthesis of nonproteinogenic tryptophan derivatives as well as their associated indole alkaloid natural products [60][61][62][63

Intermediates and shunt products of massiliachelin biosynthesis in Massilia sp. NR 4-1

• Till Steinmetz,
• Blaise Kimbadi Lombe and
• Markus Nett

Beilstein J. Org. Chem. 2023, 19, 909–917, doi:10.3762/bjoc.19.69

• represent intermediates or shunt products in massiliachelin biosynthesis. A model for their formation is presented. Experimental Analytical methods Preparative HPLC was conducted on a Shimadzu LC-20A system equipped with two pumps (LC-20AD), a photo-diode array detector (SPD-M20A), a degasser unit (DGU-20A

Synthesis of aliphatic nitriles from cyclobutanone oxime mediated by sulfuryl fluoride (SO₂F₂)

• Xian-Lin Chen and
• Hua-Li Qin

Beilstein J. Org. Chem. 2023, 19, 901–908, doi:10.3762/bjoc.19.68

• of novel synthetic methods and strategies toward nitrile group construction continues to be a focus for synthetic chemists. The cross-coupling reactions of C–C bonds catalyzed by transition-metal complexes play a crucial role in modern organic synthesis, as they make it feasible to synthesize complex

First synthesis of acylated nitrocyclopropanes

• Kento Iwai,
• Rikiya Kamidate,
• Khimiya Wada,
• Haruyasu Asahara and
• Nagatoshi Nishiwaki

Beilstein J. Org. Chem. 2023, 19, 892–900, doi:10.3762/bjoc.19.67

• nitronic acid furnishes cyclopropane 1a (method a) [1][4][12][13]. Halogenated malonate 6a [7][14][15][16][17] and nitrostyrene 7 [18] can also be used as substrates in this protocol (methods b and c, respectively). In these methods, diesters are mostly used as 1,3-dicarbonyl compounds, with acetylacetone

• cyclization reaction using 4e by 1H NMR. Versatile reactivities of cyclopropanes 1a. Preparative methods for cyclopropanedicarboxylates 1a. Bromination of ethyl acetoacetate (3c) and reaction with nitrostyrene 2a. Reaction of 4b with (diacetoxyiodo)benzene (top); structural determination of product 9 (bottom

Asymmetric tandem conjugate addition and reaction with carbocations on acylimidazole Michael acceptors

• Brigita Mudráková,
• Renata Marcia de Figueiredo,
• Jean-Marc Campagne and
• Radovan Šebesta

Beilstein J. Org. Chem. 2023, 19, 881–888, doi:10.3762/bjoc.19.65

• best match between the experimental and averaged calculated spectra was achieved by B97-3c/def2-mTZVP and PBE0-D4/def2-SVP methods. The presence of many conformers in these types of derivatives complicates their analysis and decreased the fit between experimental and calculated CD spectra. Furthermore

A fluorescent probe for detection of Hg²⁺ ions constructed by tetramethyl cucurbit[6]uril and 1,2-bis(4-pyridyl)ethene

• Xiaoqian Chen,
• Naqin Yang,
• Yue Ma,
• Xinan Yang and
• Peihua Ma

Beilstein J. Org. Chem. 2023, 19, 864–872, doi:10.3762/bjoc.19.63

• detection methods include atomic absorption spectroscopy, mass spectrometry, emission spectroscopy and electrochemical methods [4][5][6][7]. These detection methods are expensive and time-consuming, and the detection of samples becomes extremely difficult. Therefore, it is of great significance to construct

Pyridine C(sp²)–H bond functionalization under transition-metal and rare earth metal catalysis

• Haritha Sindhe,
• Malladi Mounika Reddy,
• Karthikeyan Rajkumar,
• Akshay Kamble,
• Amardeep Singh,
• Anand Kumar and
• Satyasheel Sharma

Beilstein J. Org. Chem. 2023, 19, 820–863, doi:10.3762/bjoc.19.62

• of several methods for the synthesis of functionalized pyridines or their integration into an organic molecule, new methodologies for the direct functionalization of pyridine scaffolds have been developed during the past two decades. In addition, transition-metal-catalyzed C–H functionalization and

• pyridine syntheses have relied on the condensation of carbonyl compounds and amines for a very long time [11]. The classical methods for the synthesis of functionalized pyridine include the Hantzsch pyridine synthesis and the Bohlmann–Rahtz synthesis (Scheme 1a and b). Furthermore, alternative

• intermediates in organic synthesis and are also present in various natural products as well as drug molecules [65][66][67][68]. Though there are traditional methods available for C–H olefinations they suffer from some disadvantages such as for example requiring prefunctionalized substrates as in case of the

Facile access to 3-sulfonylquinolines via Knoevenagel condensation/aza-Wittig reaction cascade involving ortho-azidobenzaldehydes and β-ketosulfonamides and sulfones

• Ksenia Malkova,
• Andrey Bubyrev,
• Stanislav Kalinin and
• Dmitry Dar’in

Beilstein J. Org. Chem. 2023, 19, 800–807, doi:10.3762/bjoc.19.60

• modification of various substrates, such as 3-bromoquinolines [52][53][54][55], quinoline-3-boronic acids [56], and diazonium salts [57]. When considering general methods for the quinoline core formation, aromatic ortho-substituted carbonyl compounds attract attention as decent and easily available reagents

• the Center for X-ray Diffraction Methods of Saint Petersburg State University Research Park for obtaining the analytical data. Funding This research was supported by the Russian Science Foundation (project grant 21-73-00220).