Synthesis and optoelectronic properties of benzoquinone-based donor–acceptor compounds

• Daniel R. Sutherland,
• Nidhi Sharma,
• Georgina M. Rosair,
• Ifor D. W. Samuel,
• Ai-Lan Lee and
• Eli Zysman-Colman

Beilstein J. Org. Chem. 2019, 15, 2914–2921, doi:10.3762/bjoc.15.285

• St Andrews, St Andrews, KY16 9ST, UK Organic Semiconductor Centre, SUPA School of Physics and Astronomy, University of St Andrews, St Andrews, KY16 9SS, UK 10.3762/bjoc.15.285 Abstract Herein, we report a mild and efficient palladium-catalyzed C–H functionalization method to synthesize a series of

Palladium-catalyzed Sonogashira coupling reactions in γ-valerolactone-based ionic liquids

• László Orha,
• József M. Tukacs,
• László Kollár and
• László T. Mika

Beilstein J. Org. Chem. 2019, 15, 2907–2913, doi:10.3762/bjoc.15.284

• wide applicability from syntheses of common building blocks to agrochemicals, just to name a few advantages [4][5][6]. From the series of palladium-assisted C–C bond formation, the Sonogashira coupling reaction has been identified as a viable synthetic method for the preparation of various alkenyl- and

• important transformation. Herein we report a study on the palladium-catalyzed copper- and added base-free Sonogashira coupling reactions to synthesize various acetylenes in γ-valerolactone-based ionic liquids under mild conditions. Results and Discussion We recently demonstrated that copper-catalyzed

• the role of ionic liquids as coordination agents for transition metal species was demonstrated [36][37] and palladium carboxylate complexes are well-known compounds, it can be proposed that the carboxylate group of the 4-ethoxyvalerate anion could stabilize the catalytically active species and

Palladium-catalyzed synthesis and nucleotide pyrophosphatase inhibition of benzo[4,5]furo[3,2-b]indoles

• Hoang Huy Do,
• Saif Ullah,
• Alexander Villinger,
• Joanna Lecka,
• Jean Sévigny,
• Peter Ehlers,
• Jamshed Iqbal and
• Peter Langer

Beilstein J. Org. Chem. 2019, 15, 2830–2839, doi:10.3762/bjoc.15.276

• , Québec, QC, G1V 4G2, Canada Leibniz-Institut für Katalyse an der Universität Rostock e.V., Albert Einstein Str. 29a, 18059 Rostock, Germany 10.3762/bjoc.15.276 Abstract A two-step palladium-catalyzed procedure based on Suzuki–Miyaura cross coupling, followed by a double Buchwald–Hartwig reaction, allows

• results were rationalized based on docking studies. Keywords: Buchwald–Hartwig reaction; cyclization; N-heterocycles; palladium; Suzuki–Miyaura reaction; Introduction Furoindoles and their derivatives have received a lot of attention based on their versatile pharmaceutical activities. Furoindols were

• synthesis of benzo[4,5]furo[3,2-b]indoles by double Buchwald–Hartwig reaction was studied next. The conditions were optimized for the reaction of 3 with p-toluidine (4b, Scheme 1, Table 1). The amount of ligand and palladium precursor was optimized using different solvents (dioxane, toluene, and DMF

Photoreversible stretching of a BAPTA chelator marshalling Ca²⁺-binding in aqueous media

• Aurélien Ducrot,
• Arnaud Tron,
• Robin Bofinger,
• Ingrid Sanz Beguer,
• Jean-Luc Pozzo and
• Nathan D. McClenaghan

Beilstein J. Org. Chem. 2019, 15, 2801–2811, doi:10.3762/bjoc.15.273

• acetonitrile, forming the BAPTA precursor 1b. The palladium-catalyzed benzyl cleavage was followed by a double alkylation with 2, reactant 2 being synthesized from 4-(4-nitrophenyl)butanoic acid. The 4-nitrobenzene groups of the pendant arms were subsequently reduced yielding the corresponding anilines (1e). A

An improved, scalable synthesis of Notum inhibitor LP-922056 using 1-chloro-1,2-benziodoxol-3-one as a superior electrophilic chlorinating agent

• Nicky J. Willis,
• Elliott D. Bayle,
• George Papageorgiou,
• David Steadman,
• Benjamin N. Atkinson,
• William Mahy and
• Paul V. Fish

Beilstein J. Org. Chem. 2019, 15, 2790–2797, doi:10.3762/bjoc.15.271

• acid (c-PrB(OH)2) to the corresponding MIDA-boronate 11 would improve the quality of the reagent and slow release of the active boron species during the course of the reaction would allow us to reduce the number of molar equivalents required to improve conversion [16]. Palladium-mediated cross coupling

A chiral self-sorting photoresponsive coordination cage based on overcrowded alkenes

• Constantin Stuckhardt,
• Diederik Roke,
• Wojciech Danowski,
• Edwin Otten,
• Sander J. Wezenberg and
• Ben L. Feringa

Beilstein J. Org. Chem. 2019, 15, 2767–2773, doi:10.3762/bjoc.15.268

• between the three isomers. Two of the isomers were able to form host–guest complexes opening up new prospects toward stimuli-controlled substrate binding and release. Keywords: coordination cages; molecular motors; molecular switches; overcrowded alkene; palladium; Introduction Supramolecular

• supramolecular palladium complexes caused immediate crystallization [22]. Moreover, azobenzenes have been used to functionalize both the interior [23] and exterior [24] of SCCs to photochemically control guest binding and release. Furthermore, incorporation of dithienylethene into the ligands connecting the

• (top left) and DFT optimized structures of cage complexes Pd2(stable E-1)4, Pd2(stable Z-1)4 and Pd2(unstable Z-1)4. For clarity only one of the enantiomeric cages was depicted on the figure (carbon – black, nitrogen – blue, oxygen – red, palladium – cyan, chlorine – green, hydrogen – white). Aromatic

Iodine-mediated hydration of alkynes on keto-functionalized scaffolds: mechanistic insight and the regiospecific hydration of internal alkynes

• Zachary Lee,
• Brandon R. Jones,
• Nyochembeng Nkengbeza,
• Michael Phillips,
• Kayla Valentine,
• Alexis Stewart,
• Brandon Sellers,
• Nicholas Shuber and
• Karelle S. Aiken

Beilstein J. Org. Chem. 2019, 15, 2747–2752, doi:10.3762/bjoc.15.265

• extremely harmful to environmental and biological systems [3]. In light of mercury’s toxicity, the synthetic community has given much attention to the use of less harmful reagents. Success has been obtained with many other transition metal salts, for example, palladium(II) [4][5], rhodium(III) [6], copper

A review of asymmetric synthetic organic electrochemistry and electrocatalysis: concepts, applications, recent developments and future directions

• Munmun Ghosh,
• Valmik S. Shinde and
• Magnus Rueping

Beilstein J. Org. Chem. 2019, 15, 2710–2746, doi:10.3762/bjoc.15.264

• a long gap, in 2006, Takano and Seki prepared a PLPy(Pd) electrode coated with a chiral poly-(N-substituted pyrrole) film having ʟ-(+)-lactic acid moieties as the optically active groups and further incorporated with palladium metal [27]. Thus prepared electrodes 21 were used for the

• and gem-dibromides on a poly-ʟ-valine-coated graphite cathode. Asymmetric hydrogenation of prochiral ketones with poly[RuIII(L)2Cl2]+-modified carbon felt cathodes. Asymmetric hydrogenation of α-keto esters using chiral polypyrrole film-coated cathode incorporated with palladium metal. Quinidine and

Synthesis of aryl-substituted thieno[3,2-b]thiophene derivatives and their use for N,S-heterotetracene construction

• Nadezhda S. Demina,
• Nikita A. Kazin,
• Nikolay A. Rasputin,
• Roman A. Irgashev and
• Gennady L. Rusinov

Beilstein J. Org. Chem. 2019, 15, 2678–2683, doi:10.3762/bjoc.15.261

• -carboxylates bearing aryl moieties at the C-5 or C-4 position were appropriate starting substrates to construct TT scaffolds according to our strategy. Compounds 2a–k can be prepared either through direct palladium-catalyzed arylation of methyl 3-chlorothiophene-2-carboxylate [19] or through replacement of the

A new approach to silicon rhodamines by Suzuki–Miyaura coupling – scope and limitations

• Thines Kanagasundaram,
• Antje Timmermann,
• Carsten S. Kramer and
• Klaus Kopka

Beilstein J. Org. Chem. 2019, 15, 2569–2576, doi:10.3762/bjoc.15.250

• gave access to silicon rhodamines in poor to moderate yields, we wanted to improve these first valuable experimental results. Results: The preparation of the xanthene triflate was enhanced and several boron sources were screened to find the optimal coupling partner. After optimization of the palladium

Formation of alkyne-bridged ferrocenophanes using ring-closing alkyne metathesis on 1,1’-diacetylenic ferrocenes

• Celine Bittner,
• Dirk Bockfeld and
• Matthias Tamm

Beilstein J. Org. Chem. 2019, 15, 2534–2543, doi:10.3762/bjoc.15.246

• behaviour can be ascribed to the fact that Ag(SbF6) acts as a stronger oxidant in DCM compared to THF solution [98]. Well-defined catalysts for alkyne metathesis. Examples for a ferrrocenic thiacrown ether complexing palladium (IV), and a dicationic ferrocenophane (V) featuring a diyne bridge for ion

Reversible switching of arylazopyrazole within a metal–organic cage

• Anton I. Hanopolskyi,
• Soumen De,
• Michał J. Białek,
• Yael Diskin-Posner,
• Liat Avram,
• Moran Feller and
• Rafal Klajn

Beilstein J. Org. Chem. 2019, 15, 2398–2407, doi:10.3762/bjoc.15.232

• ) before (left) and after (center) UV irradiation and after the addition of ~2.5 equiv of 2 (right). The vertical dashed lines denote the resonances of 1’s protons. Palladium-accelerated back-isomerization of Z-1. a) Kinetics of the thermal back-isomerization of Z-1 (c = 0.187 mM) in the presence of

Functionalization of 4-bromobenzo[c][2,7]naphthyridine via regioselective direct ring metalation. A novel approach to analogues of pyridoacridine alkaloids

• Benedikt C. Melzer,
• Alois Plodek and
• Franz Bracher

Beilstein J. Org. Chem. 2019, 15, 2304–2310, doi:10.3762/bjoc.15.222

• , phenolates), acyl anions (generated by umpolung of aldehydes with imidazolium salts) and by palladium-catalyzed cross-coupling reactions (Suzuki, Stille) [10]. A related Stille cross coupling of a benzo[c][2,7]naphthyridine bearing a triflate group at C-5 gave an intermediate for the total synthesis of

• -bromobenzo[c][2,7]naphthyridines 12a–d in hand we aimed at the synthesis of the respective pyrido[2,3,4-kl]acridines by intramolecular ring-closing steps. Similar C–C couplings were performed previously by application of palladium-catalysed cross-coupling reactions, photochemical cyclizations or even in

• synthesis via an Heck-type palladium-catalysed reaction according to the method of Harayama [30] (Pd(II)acetate/tri(o-tolyl)phosphine/K2CO3) did not lead to the expected alkaloid 3. Also the radical procedure published by Markgraf et al. [31] using AIBN and Bu3SnH and a photochemical cyclization protocol we

Recent advances in transition-metal-catalyzed incorporation of fluorine-containing groups

• Xiaowei Li,
• Xiaolin Shi,
• Xiangqian Li and
• Dayong Shi

Beilstein J. Org. Chem. 2019, 15, 2213–2270, doi:10.3762/bjoc.15.218

• -catalyzed fluorination/fluoroalkylation reactions represent an important and hot topic in fluorine chemistry. In addition, among the various metals developed, palladium is the most commonly employed transition metal, followed by copper owing to its high efficiency and cheapness. Meanwhile, other transition

• different catalysts, such as palladium, copper, silver, iron, nickel, ruthenium, cobalt, etc. Palladium catalysis Palladium is a member of the nickel triad in the periodic table, and palladium complexes exist in three oxidation states, Pd(0), Pd(II), and Pd(IV). Straightforward interconversion between

• reaction used a different chiral bisphosphine ligand resulting in larger bite angles and afforded the products in good yields (Scheme 2b) [36]. A palladium-catalyzed method for the formation of allylic C–F bonds from allyl p-nitrobenzoate using TBAF(t-BuOH)4 as the fluoride source was explored by

Azologization and repurposing of a hetero-stilbene-based kinase inhibitor: towards the design of photoswitchable sirtuin inhibitors

• Christoph W. Grathwol,
• Nathalie Wössner,
• Sören Swyter,
• Adam C. Smith,
• Enrico Tapavicza,
• Robert K. Hofstetter,
• Anja Bodtke,
• Manfred Jung and
• Andreas Link

Beilstein J. Org. Chem. 2019, 15, 2170–2183, doi:10.3762/bjoc.15.214

• useful tools in the further investigation of the biochemistry and pharmacology of sirtuins. Results Chemistry of azastilbenes All azastilbene derivatives were synthesised by palladium-catalysed cross-coupling reactions using either commercially available 5-bromonicotinamide (3a) or methyl 5

Regioselective Pd-catalyzed direct C1- and C2-arylations of lilolidine for the access to 5,6-dihydropyrrolo[3,2,1-ij]quinoline derivatives

• Hai-Yun Huang,
• Haoran Li,
• Thierry Roisnel,
• Jean-François Soulé and
• Henri Doucet

Beilstein J. Org. Chem. 2019, 15, 2069–2075, doi:10.3762/bjoc.15.204

• Hai-Yun Huang Haoran Li Thierry Roisnel Jean-Francois Soule Henri Doucet Univ Rennes, CNRS, ISCR-UMR 6226, F-35000 Rennes, France 10.3762/bjoc.15.204 Abstract The Pd-catalyzed C–H bond functionalization of lilolidine was investigated. The use of a palladium-diphosphine catalyst associated to

• methodology provides a straightforward access to several lilolidine derivatives from commercially available compounds via one, two or three C–H bond functionalization steps allowing to tune their biological properties. Keywords: catalysis: C–C bond formation; C–H bond activation; lilolidine; palladium

• ) might be due to an easier coordination of acetates to palladium which favors the concerted metallation deprotonation (CMD) mechanism [40]. The regioselectivities observed using acetate bases are consistent with a CMD mechanism. Then, a set of aryl bromides was reacted with lilolidine using 2 mol % of

Attempted synthesis of a meta-metalated calix[4]arene

• Christopher D. Jurisch and
• Gareth E. Arnott

Beilstein J. Org. Chem. 2019, 15, 1996–2002, doi:10.3762/bjoc.15.195

• this using a pyridyl sulfoxide directing group and palladium as the metal, but in this case the palladium caused a double C–H activation and formed an impressive bridge to the adjacent calix[4]arene aromatic ring [14]. The question for us was whether this bridge formation was a general principle or

• conditions (catalytic palladium on carbon and hydrazine hydrate) was found to be the most efficient method for obtaining monoaminocalix[4]arene 10 in essentially quantitative yields (Scheme 3). The azide-Sandmeyer reaction on monoaminocalix[4]arene 10 was then attempted using sodium nitrite and p

• also important to note was that the reaction did not result in the oxidative bridge formation reported by Lhoták when they attempted a meta-functionalization of a calix[4]arene with palladium. The NMR and mass spectra were proof of this. We have also developed a more robust mononitration method

A review of the total syntheses of triptolide

• Xiang Zhang,
• Zaozao Xiao and
• Hongtao Xu

Beilstein J. Org. Chem. 2019, 15, 1984–1995, doi:10.3762/bjoc.15.194

• conversion of 89 to vinyl triflate 90, followed by reduction and palladium-catalyzed carbonylation–lactone formation to give key intermediate 8 [75][76][77]. After that, the three successive epoxides were installed by known procedures with some modification. The highlights were the introduction of the second

• and its relatives from commercially available acid 32 (Figure 2, route J and Scheme 8) [46]. This synthesis highlights the utilization of an indium(III)-catalyzed cationic polycyclization of 17 and a palladium-catalyzed carbonylation–in situ lactone formation to construct the key intermediate 94

• , which could readily be converted to triptolide and its relatives such as triptophenolid, tripdiolide, and 16-hydroxytriptolide via palladium-catalyzed cross-coupling or Claisen rearrangement reactions. Importantly, by modification of the C-2,C3 olefin and late-stage installation of the C-13 isopropyl

Recent advances on the transition-metal-catalyzed synthesis of imidazopyridines: an updated coverage

• Gagandeep Kour Reen,
• Ashok Kumar and
• Pratibha Sharma

Beilstein J. Org. Chem. 2019, 15, 1612–1704, doi:10.3762/bjoc.15.165

• associated with the reported methodologies. Amongst various reported TMs, the participation of copper as the catalyst has been used in the largest number of cases followed by the use of palladium, rhodium, and others. It has been further observed that lanthanum, scandium, and vanadium have been very seldomly

• organic reactions. In the syntheses of IPs, various forms of copper viz., salts, complexes, MOFs, oxides, and nanoparticles (NPs) have been used as the catalytic system in both multicomponent reactions (MCRs) as well as derivatization methodologies. The role of palladium in synthetic chemistry Pd

• the past few years [57]. Recently, Buchwald and Castillo have reviewed the exceptional utility of Pd-catalyzed C–N cross-coupling reactions for the preparation of anilines and aniline derivatives [58]. In many of the reactions, palladium was used along with a co-catalyst to enhance its catalytic

Synthesis of pyrrolo[1,2-a]quinolines by formal 1,3-dipolar cycloaddition reactions of quinolinium salts

• Anthony Choi,
• Rebecca M. Morley and
• Iain Coldham

Beilstein J. Org. Chem. 2019, 15, 1480–1484, doi:10.3762/bjoc.15.149

• explore the diversity of products that could be obtained from these adducts, we carried out a reduction of the alkene in compounds 9 and 10 by using hydrogen and palladium on charcoal (Scheme 4). This provides the tetrahydroquinoline adducts 11 and 12. Additionally, and in contrast, oxidation of the

• the adducts 9 and 10. The bromide 15b was coupled with phenylboronic acid using palladium catalysis to give derivative 16 (the chloride 15a was inert under these conditions). The ability to prepare halogenated derivatives and to undergo palladium coupling demonstrates further versatility of these

2,3-Dibutoxynaphthalene-based tetralactam macrocycles for recognizing precious metal chloride complexes

• Li-Li Wang,
• Yi-Kuan Tu,
• Huan Yao and
• Wei Jiang

Beilstein J. Org. Chem. 2019, 15, 1460–1467, doi:10.3762/bjoc.15.146

• sidewalls have been synthesized and characterized. The macrocycle containing isophthalamide bridges can bind square-planar chloride coordination complexes of gold(III), platinum(II), and palladium(II) in CDCl3, while the macrocycle with 2,6-pyridine dicarboxamide bridging units cannot. This may be due to

• a pair of new tetralactam macrocycles with 2,3-dibutoxynaphthalene as the sidewalls. The tetralactam macrocycle with 2,6-pyridine dicarboxamide cannot bind square-planar chloride coordination complexes of gold(III), platinum(II), and palladium(II) in CDCl3, while the macrocycle containing

• isophthalamide bridging units bind these complexes with decent binding affinities. This macrocycle shows similar binding affinity to chloride, weaker affinity to the chloride complex of gold(III), and much stronger affinities to the chloride complexes of platinum(II) and palladium(II), when compared to the

Selenophene-containing heterotriacenes by a C–Se coupling/cyclization reaction

• Pierre-Olivier Schwartz,
• Sebastian Förtsch,
• Astrid Vogt,
• Elena Mena-Osteritz and
• Peter Bäuerle

Beilstein J. Org. Chem. 2019, 15, 1379–1393, doi:10.3762/bjoc.15.138

• B3LYP and CAMB3LYP functional and 6-31++(d,p) basis-set [56]. Materials Iodine, zinc(II) chloride, copper(II) chloride, potassium hydroxide, chlorotrimethylsilane, copper(I) iodide, and potassium phosphate were purchased from Merck. Diisopropylamine, bis(dibenzylideneacetone)palladium(0

Selective detection of DABCO using a supramolecular interconversion as fluorescence reporter

• Indrajit Paul,
• Debabrata Samanta,
• Sudhakar Gaikwad and
• Michael Schmittel

Beilstein J. Org. Chem. 2019, 15, 1371–1378, doi:10.3762/bjoc.15.137

• in Scheme 1. Therefore, ligands 1 and 2 were synthesized by a palladium-catalyzed Sonogashira coupling reaction (Supporting Information File 1). All compounds were fully characterized by 1H NMR, 1H,1H-COSY, UV–vis, ESIMS and elemental analysis (Supporting Information File 1). Subsequently, we

Synthesis of dipolar molecular rotors as linkers for metal-organic frameworks

• Sebastian Hamer,
• Fynn Röhricht,
• Marius Jakoby,
• Ian A. Howard,
• Xianghui Zhang,
• Christian Näther and
• Rainer Herges

Beilstein J. Org. Chem. 2019, 15, 1331–1338, doi:10.3762/bjoc.15.132

• increase the yield and avoid these side reactions, we reacted diiodo compound 11b with 1-trimethylsilyl-2-tributylstannylacetylene in a Stille cross coupling, where no formation of phthalocyanine or similar side products was observed. Changing the catalyst from tetrakis(triphenylphosphine)palladium(0) to

• bis(tri-tert-butylphosphine)palladium(0) the yield increased to satisfying 90%. For conversion into the dicarboxylic acid 3, another change of the general procedure was necessary. Probably because of the extremely electron deficient aromatic system in 12a, desilylation at room temperature led to

• higher yields. Starting from commercially available 5,6-dibromo-1,3-benzodioxole (13a) and literature known 6,7-dibromo-1,4-benzodioxane (13b) [55], dicyanation of the dibromo compounds was achieved with zinc(II) cyanide under palladium catalysis [56]. The typical Rosemund–von-Braun reaction using copper

Remarkable effect of alkynyl substituents on the fluorescence properties of a BN-phenanthrene

• Alberto Abengózar,
• David Sucunza,
• Patricia García-García and
• Juan J. Vaquero

Beilstein J. Org. Chem. 2019, 15, 1257–1261, doi:10.3762/bjoc.15.122

• -phenanthrenes with substituents of a diverse nature have been synthesized by palladium-catalyzed cross-coupling reactions of a common chloro-substituted precursor, which was made from readily available materials in only four steps. Evaluation of the photophysical properties of the prepared compounds unveiled an

• -aromatics. Interestingly, 1a turned out to be weakly fluorescent [23], in contrast to other BN-phenanthrene isomers described previously [25][26]. The presence of aryl or amino substituents at C1, which can be introduced via bromination and subsequent palladium-catalyzed cross coupling, does not have a

• alkynyl substituents, as their presence in PAHs is known to alter the fluorescence properties thereof markedly [27][28][29]. In this regard, we have recently described a methodology for the synthesis of a chloro-substituted BN-benzo[c]phenanthrene and its subsequent derivatization via palladium-catalyzed