Bioinspired tetraamino-bisthiourea chiral macrocycles in catalyzing decarboxylative Mannich reactions

• Hao Guo,
• Yu-Fei Ao,
• De-Xian Wang and
• Qi-Qiang Wang

Beilstein J. Org. Chem. 2022, 18, 486–496, doi:10.3762/bjoc.18.51

• was commonly introduced through in-situ, noncovalent inclusion/encapsulation in the cavity or by covalent, post-functionalization of the macrocyclic scaffold. The encapsulated catalytic group could occupy the space for substrate entering, or has a risk to be squeezed out of the cavity under complex

Tosylhydrazine-promoted self-conjugate reduction–Michael/aldol reaction of 3-phenacylideneoxindoles towards dispirocyclopentanebisoxindole derivatives

• Sayan Pramanik and
• Chhanda Mukhopadhyay

Beilstein J. Org. Chem. 2022, 18, 469–478, doi:10.3762/bjoc.18.49

• substitutions on the indoline ring could be unambiguously converted into the corresponding products (Scheme 2, Scheme 3). Halo-substituted indolines (5-Cl, 5-Br) were found to furnish the desired products in good yields (70–80%) which provided possibilities of further functionalization. In addition, the

Synthesis of 3,4,5-trisubstituted isoxazoles in water via a [3 + 2]-cycloaddition of nitrile oxides and 1,3-diketones, β-ketoesters, or β-ketoamides

• Md Imran Hossain,
• Md Imdadul H. Khan,
• Seong Jong Kim and
• Hoang V. Le

Beilstein J. Org. Chem. 2022, 18, 446–458, doi:10.3762/bjoc.18.47

• oxide and strained alkenes has been used to achieve the high-density functionalization of oligodeoxyribonucleotides [29]. However, the alkenes need to be highly strained in order for this reaction to occur without the need for an additional metal catalyst. As an alternative to the mild acidic conditions

Menadione: a platform and a target to valuable compounds synthesis

• Acácio S. de Souza,
• Ruan Carlos B. Ribeiro,
• Dora C. S. Costa,
• Fernanda P. Pauli,
• David R. Pinho,
• Matheus G. de Moraes,
• Fernando de C. da Silva,
• Luana da S. M. Forezi and
• Vitor F. Ferreira

Beilstein J. Org. Chem. 2022, 18, 381–419, doi:10.3762/bjoc.18.43

• studies developed by Naturale’s group, α-, β-, and γ-amino acids of linear and branched chains were used, as well as different amine protection groups (Table 5). The results revealed that the functionalization of naphthoquinones by a radical addition of decarboxylated α-, β- and γ-N-protected amino acids

Borylated norbornadiene derivatives: Synthesis and application in Pd-catalyzed Suzuki–Miyaura coupling reactions

• Robin Schulte and
• Heiko Ihmels

Beilstein J. Org. Chem. 2022, 18, 368–373, doi:10.3762/bjoc.18.41

• because the parent system does not operate in the spectrum of the sunlight. Therefore, the efficient and purposeful functionalization of the norbornadiene scaffold is an important and challenging task in this field. Specifically, earlier approaches for the synthesis of norbornadiene derivatives are mainly

Synthesis of 5-unsubstituted dihydropyrimidinone-4-carboxylates from deep eutectic mixtures

• Sangram Gore,
• Sundarababu Baskaran and
• Burkhard König

Beilstein J. Org. Chem. 2022, 18, 331–336, doi:10.3762/bjoc.18.37

• at the C4 position allow versatile further functionalization and are biologically interesting DHPMs [17][18][19][20][21], we envisioned an environmentally benign cyclocondensation protocol using low melting mixtures as a green reaction medium. We have established low melting mixtures [28][29][30][31

Site-selective reactions mediated by molecular containers

• Rui Wang and
• Yang Yu

Beilstein J. Org. Chem. 2022, 18, 309–324, doi:10.3762/bjoc.18.35

• functionalization of C–H bonds brings reaction economy and effectiveness. However, owing to the rifeness of the reactivity-similar C–H bonds, it is hard to achieve discriminate control over the product site-selectivity. In nature, the site-selective oxidation of C–H bonds is facilitated by enzymes with the donor

• diterpenoid substrates have four C–C double bonds with a trisubstituted terminal one. Functionalization of these structures would result in mixtures of products derived from each potential alkene group without site-selectivity. The cage host A was proved to recognize organic molecules in water and pre

• terminal was exposed to the aqueous solution and the more hydrophobic olefin terminal was buried deep in the cavitand hence protected from the further functionalization. This methodology could be expanded generally to the systems of converting symmetrical hydrophobic guests to unsymmetrical, amphiphilic

Iridium-catalyzed hydroacylation reactions of C1-substituted oxabenzonorbornadienes with salicylaldehyde: an experimental and computational study

• Angel Ho,
• Austin Pounder,
• Krish Valluru,
• Leanne D. Chen and
• William Tam

Beilstein J. Org. Chem. 2022, 18, 251–261, doi:10.3762/bjoc.18.30

• revolutionized the modern chemist’s synthetic toolbox, prior installation of these functional groups requires a number of steps, leading to undesired side-products and reduced overall yield. An attractive alternative is the catalytic activation and subsequent functionalization of otherwise inert carbon–hydrogen

• functionalization. Over the years, several interesting transformations have been investigated such as cycloadditions 4 [18][19][20][21][22][23], dimerizations 3 [24][25][26][27], isomerizations [28][29][30][31], among other reactions that have been reported [32][33][34][35][36][37][38]. The nucleophilic ring

Chemoselective N-acylation of indoles using thioesters as acyl source

• Tianri Du,
• Xiangmu Wei,
• Honghong Xu,
• Xin Zhang,
• Ruiru Fang,
• Zheng Yuan,
• Zhi Liang and
• Yahui Li

Beilstein J. Org. Chem. 2022, 18, 89–94, doi:10.3762/bjoc.18.9

• cannabinoid (hCB1) receptor [3] (Figure 1). Indole has multiple reactive sites, and chemoselective N- or C-functionalization of indoles is a challenging and important task [4][5]. Acylation of indoles frequently takes place at the C3 position because of the relatively strong electron cloud density. As N

Earth-abundant 3d transition metals on the rise in catalysis

• Nikolaos Kaplaneris and
• Lutz Ackermann

Beilstein J. Org. Chem. 2022, 18, 86–88, doi:10.3762/bjoc.18.8

• , Germany 10.3762/bjoc.18.8 Keywords: C–H activation; 3d transition metals; green chemistry; late-stage functionalization; sustainability; Transition metal catalysis has emerged as a transformative platform for the assembly of increasingly complex compounds, with enabling applications to natural product

• . Applications of this strategy range from late-stage functionalization to modern photocatalysis and electrocatalysis, with contributions from around the globe, including Brazil, China, Japan, Germany, India, and South Korea, among others. The increasing use of C–H activations in academic and industrial

• laboratories calls for a critical analysis of these methods to enable an efficient transition of these methods. Hence, manganese-catalyzed C–H functionalization for late-stage functionalizations of biomolecules and drug-like scaffolds are summarized [8]. Likewise, 3d transition metal-catalyzed C–H

1,2-Naphthoquinone-4-sulfonic acid salts in organic synthesis

• Ruan Carlos B. Ribeiro,
• Patricia G. Ferreira,
• Amanda de A. Borges,
• Luana da S. M. Forezi,
• Fernando de Carvalho da Silva and
• Vitor F. Ferreira

Beilstein J. Org. Chem. 2022, 18, 53–69, doi:10.3762/bjoc.18.5

• possible to identify three alternatives for the functionalization of β-NQS with amines: a) substitution of sulfonate by secondary amines; b) substitution of sulfonate by primary amines, followed by isomerization; and c) double addition of primary amines. In addition, other nucleophiles can also be used

Recent advances and perspectives in ruthenium-catalyzed cyanation reactions

• Thaipparambil Aneeja,
• Cheriya Mukkolakkal Abdulla Afsina,
• Padinjare Veetil Saranya and
• Gopinathan Anilkumar

Beilstein J. Org. Chem. 2022, 18, 37–52, doi:10.3762/bjoc.18.4

• -up, high reproducibility and yields, lower catalyst loading, high product purity, and excellent selectivity. A visible-light-promoted Strecker-type functionalization of N-aryl-substituted tetrahydroisoquinolines under flow conditions was reported (Scheme 22) [45]. The cyanating agent utilized was

• strategy. Proposed mechanistic pathway for the cyanation of the aldimine intermediate. Strecker-type functionalization of N-aryl-substituted tetrahydroisoquinolines under flow conditions. One-pot synthesis of α-aminonitriles using RuCl3 as catalyst. Synthesis of alkyl nitriles using (Ru(TMHD)3) as the

Efficient N-arylation of 4-chloroquinazolines en route to novel 4-anilinoquinazolines as potential anticancer agents

• Rodolfo H. V. Nishimura,
• Thiago dos Santos,
• Valter E. Murie,
• Luciana C. Furtado,
• Leticia V. Costa-Lotufo and
• Giuliano C. Clososki

Beilstein J. Org. Chem. 2021, 17, 2968–2975, doi:10.3762/bjoc.17.206

• -anilinoquinazolines can be prepared from N-methylanilines under basic [14] or acidic [15][16] (Scheme 1c) conditions. Due to our interest in the functionalization of aromatic and heterocyclic compounds of medicinal relevance [21][22][23][24][25][26], we recently reported the preparation of an iodo-substituted analog

DABCO-promoted photocatalytic C–H functionalization of aldehydes

• Bruno Maia da Silva Santos,
• Mariana dos Santos Dupim,
• Cauê Paula de Souza,
• Thiago Messias Cardozo and
• Fernanda Gadini Finelli

Beilstein J. Org. Chem. 2021, 17, 2959–2967, doi:10.3762/bjoc.17.205

• differences are discussed. Keywords: C–H functionalization; DABCO; HAT; photocatalysis; Introduction The functionalization of inert C–H bonds is a goal pursued by chemists from decades, due to its ubiquity in organic molecules. This strategy also dismisses tiresome protecting groups and functional group

• accessibility, it is still underused, and has only recently started to gain attention from the synthetic community. Murphy and co-workers reported the use of the DABCO radical cation, generated by a stoichiometric oxidant (TPTA-PF6), as a hydrogen abstractor for alpha-nitrogen C–H functionalization [21] (Figure

• . Alemán and co-workers also published the use of a photogenerated DABCO radical cation in a distal β-carbonyl enantioselective C–H functionalization for the synthesis of pyrroline derivatives [26] (Figure 2d). The latter is, to the best of our knowledge, the only work reporting a direct substrate C–H bond

Iron-catalyzed domino coupling reactions of π-systems

• Austin Pounder and
• William Tam

Beilstein J. Org. Chem. 2021, 17, 2848–2893, doi:10.3762/bjoc.17.196

• functionalized compound (Scheme 1b). Lastly, the reaction between two C–H compounds to form a C–C bond, formally eliminating H2, hence the dehydrogenative reference (Scheme 1c). As this coupling reaction does not require functionalization prior to coupling, it shortens the synthetic route, and lowers the

• to the styrene derivative selectively to afford a metastable benzyl radical [111] which is captured by BuOO• via a radical termination process. Iron-catalyzed oxidative addition/coupling and functionalization Carbofunctionalization Moving forward, the Fe-catalyzed carbofunctionalization of alkenes

• will be discussed as a method for the formation of multiple bonds in a single step. Mechanistically, Fe-catalyzed oxidative addition and functionalization reactions proceed similarly to cross dehydrogenative couplings (vide supra); however, these reactions will result in byproducts other than the

Selective sulfonylation and isonitrilation of para-quinone methides employing TosMIC as a source of sulfonyl group or isonitrile group

• Chuanhua Qu,
• Run Huang,
• Yong Li,
• Tong Liu,
• Yuan Chen and
• Guiting Song

Beilstein J. Org. Chem. 2021, 17, 2822–2831, doi:10.3762/bjoc.17.193

• sulfones is a valuable and appealing task in synthetic chemistry. Traditionally, diarylmethyl sulfones are synthesized by transition-metal-catalyzed deoxy C–S bond-coupling reaction of sodium arylsulfinates with diarylmethanols [11], C–H functionalization of alkyl sulfones with aryl halides [12], and via a

Me₃Al-mediated domino nucleophilic addition/intramolecular cyclisation of 2-(2-oxo-2-phenylethyl)benzonitriles with amines; a convenient approach for the synthesis of substituted 1-aminoisoquinolines

• Krishna M. S. Adusumalli,
• Lakshmi N. S. Konidena,
• Hima B. Gandham,
• Krishnaiah Kumari,
• Krishna R. Valluru,
• Satya K. R. Nidasanametla,
• Venkateswara R. Battula and
• Hari K. Namballa

Beilstein J. Org. Chem. 2021, 17, 2765–2772, doi:10.3762/bjoc.17.186

• catalyst [36][37][38][39][40]. However, pre-functionalization of isoquinolines to the corresponding halogenated isoquinolines is the main limitation associated with these protocols as they require noxious halogenated acids for their starting materials preparation. Alternative strategies include, amination

Recent advances in the asymmetric phosphoric acid-catalyzed synthesis of axially chiral compounds

• Alemayehu Gashaw Woldegiorgis and
• Xufeng Lin

Beilstein J. Org. Chem. 2021, 17, 2729–2764, doi:10.3762/bjoc.17.185

• acids are widely used in stereoselective oxidative/cross-coupling of two aryl counterparts, asymmetric control of aromatic ring formation, atroposelective functionalization of biaryl compounds, and so on [17][29][30]. In this context, Akiyama (2004) described that chiral phosphoric acids (CPAs) have

• phosphoric acid-catalyzed synthesis of axially chiral compounds and to suggest that much more attention should be paid to these catalysts in order to promote asymmetric synthesis. Review 1. Enantioselective synthesis of atropisomeric biaryls Direct C–H functionalization strategies for the atroposelective

• be prepared by asymmetric C–H activation. The C–H activation or functionalization can be achieved by a metal-catalyzed chiral phosphoric acid ligand-assisted method, which offers distinct possibilities to provide various chiral biaryl compounds by changing different directing groups (DGs) [46]. Since

Ligand-dependent stereoselective Suzuki–Miyaura cross-coupling reactions of β-enamido triflates

• Tomáš Chvojka,
• Athanasios Markos,
• Svatava Voltrová,
• Radek Pohl and
• Petr Beier

Beilstein J. Org. Chem. 2021, 17, 2657–2662, doi:10.3762/bjoc.17.179

• of cytotoxic, antifungal, or antibiotic properties [10][11][12]. Modern stereoselective syntheses leading to highly substituted enamides include cross-coupling of vinyl (pseudo)halides or organoboron compounds [13], hydroamidation of alkynes [14][15][16], ynamide functionalization [17][18][19], or

Silica gel and microwave-promoted synthesis of dihydropyrrolizines and tetrahydroindolizines from enaminones

• Robin Klintworth,
• Garreth L. Morgans,
• Stefania M. Scalzullo,
• Charles B. de Koning,
• Willem A. L. van Otterlo and
• Joseph P. Michael

Beilstein J. Org. Chem. 2021, 17, 2543–2552, doi:10.3762/bjoc.17.170

• temperature and microwave power, although requiring much longer time. A possible mechanism for the cyclization is presented, and further functionalization of the newly created pyrrole ring in the dihydropyrrolizine core is described. Keywords: dihydropyrrolizines; enaminones; microwaves; silica gel

• uncommon biaryl axis with a pyrrole ring as one of the components, the pyrrole ring itself is created in an unusual manner, and further functionalization of the pyrrole ring is possible. Since both classes of azabicyclic product are well represented in compounds of pharmaceutical interest as well as in

• , 100 °C), 1–3 h. Further functionalization of dihydropyrrolizine 19a. Reagents and conditions: (i) NBS, DMF, 0 °C, 1 h, then rt, 18 h; (ii) PhB(OH)2, Pd(PPh3)4 (cat.), Na2CO3, DMF, reflux, 20 h. Optimization of the cyclization of enaminone 15a to pyrrolizine 19a. Preparation of enaminones 15a–ya, and

Visible-light-mediated copper photocatalysis for organic syntheses

• Yajing Zhang,
• Qian Wang,
• Zongsheng Yan,
• Donglai Ma and
• Yuguang Zheng

Beilstein J. Org. Chem. 2021, 17, 2520–2542, doi:10.3762/bjoc.17.169

• complexes to photocatalysis are reported. Copper-photocatalyzed reactions, including alkene and alkyne functionalization, organic halide functionalization, and alkyl C–H functionalization that have been reported over the past 5 years, are included. Keywords: copper-photocatalyzed reactions; green chemistry

• ruthenium-based catalysts and copper-based catalysts are discussed, and the strong reduction ability of copper complexes is explained. Subsequently, mechanisms of the photoredox catalysis by CuI and CuII are summarized, and the copper-catalyzed reactions, including alkene functionalization, alkyne

• functionalization, organic halides functionalization, and alkyl C–H functionalization, are highlighted. Review 1. Special features of photoredox-catalyzed processes by copper complexes To understand photoredox-catalyzed processes, a discussion of the general mechanism of [Ru(bpy)3]2+ is needed [25][26][27]. When

Direct C(sp³)–H allylation of 2-alkylpyridines with Morita–Baylis–Hillman carbonates via a tandem nucleophilic substitution/aza-Cope rearrangement

• Siyu Wang,
• Lianyou Zheng,
• Shutao Wang,
• Shulin Ning,
• Zhuoqi Zhang and
• Jinbao Xiang

Beilstein J. Org. Chem. 2021, 17, 2505–2510, doi:10.3762/bjoc.17.167

• in the reaction to give the allylation products in 26–91% yields. The developed method provides a straightforward and operational simple strategy for the allylic functionalization of 2-alkypyridine derivatives. Keywords: 2-alkylpyridines; allylic alkylation; aza-Cope rearrangement; catalyst-free

• allylic functionalization of 2-alkylazaarenes. Due to the high pKa value of alkyl azaarenes, the functionalization of benzylic C(sp3)–H was challengeable and pre-activation of the benzylic proton with suitable Lewis acids was often required prior to deprotonation of the alkyl chain by a stoichiometric

Copper-catalyzed monoselective C–H amination of ferrocenes with alkylamines

• Zhen-Sheng Jia,
• Qiang Yue,
• Ya Li,
• Xue-Tao Xu,
• Kun Zhang and
• Bing-Feng Shi

Beilstein J. Org. Chem. 2021, 17, 2488–2495, doi:10.3762/bjoc.17.165

• ][10][11][12]. However, the above protocols generally proceeded under harsh conditions that led to poor functional group tolerance and generated stoichiometric amounts of waste. Thus far, the transition-metal-catalyzed C–H functionalization strategy has innovated the way to producing ferrocene

• preparation of ferrocene–drug conjugates effectively. Mechanistic studies indicated that the C–H activation step was the rate-determining step. 3d-Transition-metal-catalyzed C–H functionalization to access functionalized ferrocenes. Scope of ferrocenes with morpholine. Scope of various amines with 1a

Exfoliated black phosphorous-mediated CuAAC chemistry for organic and macromolecular synthesis under white LED and near-IR irradiation

• Azra Kocaarslan,
• Zafer Eroglu,
• Önder Metin and
• Yusuf Yagci

Beilstein J. Org. Chem. 2021, 17, 2477–2487, doi:10.3762/bjoc.17.164

• has set a milestone as a new and effective method for the synthesis of macromolecules [11]. Initiation of this reaction photocatalytically provides many advantages for the synthetic methodologies including bioconjugation, labeling, surface functionalization, dendrimer synthesis, polymer synthesis, and

• to the CuII complex to form CuI capable of catalyzing the click reaction in a conventional manner. The applicability of the described click reaction to synthetic polymer chemistry was also demonstrated. For this purpose, polymer functionalization by using alkyne functional poly(ε-caprolactone) (PCL

• clearly confirmed the successful chain-end functionalization. In addition, block copolymer formation via NIR activated CuAAC process between the polymers having antagonist click components, namely, polystyrene azide (PS-Az) and PCL-Alk, was investigated. At the end of irradiation in the presence of

Recent advances in the tandem annulation of 1,3-enynes to functionalized pyridine and pyrrole derivatives

• Yi Liu,
• Puying Luo,
• Yang Fu,
• Tianxin Hao,
• Xuan Liu,
• Qiuping Ding and
• Yiyuan Peng

Beilstein J. Org. Chem. 2021, 17, 2462–2476, doi:10.3762/bjoc.17.163

• structural motifs to provide the functionalized pyridine and pyrrole derivatives. The functionalization reactions cover iodination, bromination, trifluoromethylation, azidation, carbonylation, arylation, alkylation, selenylation, sulfenylation, amidation, esterification, and hydroxylation. We also briefly

• introduce the applications of the products and the reaction mechanisms for the synthesis of corresponding N-heterocycles. Keywords: 1,3-enyne; functionalization; pyridine; pyrrole; tandem annulation; Introduction The pyridine moiety is an important class of six-membered N-heterocycles that is widely found

• pyridine derivatives have been developed through the intramolecular or intermolecular tandem addition annulation/functionalization of alkynes with some N-containing compounds, such as nitriles, oximes, and imines [15][16][17][18][19]. The pyrrole structural motif is also an invaluable five-membered N