[3 + 2] Cycloaddition with photogenerated azomethine ylides in β-cyclodextrin

• Margareta Sohora,
• Leo Mandić and
• Nikola Basarić

Beilstein J. Org. Chem. 2020, 16, 1296–1304, doi:10.3762/bjoc.16.110

• different reactions, [3 + 2] cycloadditions showed applicability in the synthesis of heterocyclic 5-ring compounds [3], as well as in the green synthesis of a number of natural products [4]. One of the useful synthons in [3 + 2] cycloadditions is azomethine ylide [5][6][7], also used in intramolecular

• . Irradiation of such a complex leads to decarboxylation and formation of the reactive intermediate, azomethine ylide, within the supramolecular host. The subsequent [3 + 2] cycloaddition within the inclusion complex gives heterocyclic cycloadducts, even though it is conducted in aqueous solvent in which ylides

Ferrocenyl-substituted tetrahydrothiophenes via formal [3 + 2]-cycloaddition reactions of ferrocenyl thioketones with donor–acceptor cyclopropanes

• Grzegorz Mlostoń,
• Mateusz Kowalczyk,
• André U. Augustin,
• Peter G. Jones and
• Daniel B. Werz

Beilstein J. Org. Chem. 2020, 16, 1288–1295, doi:10.3762/bjoc.16.109

• molecular structures of cis-9c and trans-9d drawn using 50% probability displacement ellipsoids. The terminology cis and trans referred to the relative orientation of Ph and Fc groups. Synthesis of spirotetrahydrothiophenes 3 via non-concerted [3 + 2]-cycloadditions of thiocarbonyl ylide 1 with electron

Fluorinated maleimide-substituted porphyrins and chlorins: synthesis and characterization

• Valentina A. Ol’shevskaya,
• Elena G. Kononova and
• Andrei V. Zaitsev

Beilstein J. Org. Chem. 2019, 15, 2704–2709, doi:10.3762/bjoc.15.263

• ylide, generated in situ from sarcosine and paraformaldehyde. The reaction of chlorin 9 with the excess of NaN3 in DMF/DMSO resulted in tetraazide chlorin 10 in 85% yield after the purification. The reduction of azide groups in chlorin 10 with SnCl2 in MeOH gave tetraamino-substituted chlorin 11 which

Unexpected one-pot formation of the 1H-6a,8a-epiminotricyclopenta[a,c,e][8]annulene system from cyclopentanone, ammonia and dimethyl fumarate. Synthesis of highly strained polycyclic nitroxide and EPR study

• Sergey A. Dobrynin,
• Igor A. Kirilyuk,
• Yuri V. Gatilov,
• Andrey A. Kuzhelev,
• Olesya A. Krumkacheva,
• Matvey V. Fedin,
• Michael K. Bowman and
• Elena G. Bagryanskaya

Beilstein J. Org. Chem. 2019, 15, 2664–2670, doi:10.3762/bjoc.15.259

• observed in a one-pot synthesis from cyclopentanone, dimethyl fumarate and ammonium acetate. This multistep reaction includes 1,3-dipolar cycloaddition of dimethyl fumarate to the cyclic azomethine ylide formed in situ from cyclopentanone and ammonia. The polycyclic amine product was easily converted into

• nitroxide [4]. Here we report the unexpected formation of a highly strained polycyclic amine from cyclopentanone, dimethyl fumarate and ammonium acetate. This multistep reaction obviously includes the 1,3-dipolar cycloaddition of dimethyl fumarate with cyclic azomethine ylide formed in situ from

• heterocycle formation [11]. Presumably, a prototropic shift in the enamine-imine intermediate 4 is followed by electrocyclization to the cyclic azomethine ylide, which then reacts with dimethyl fumarate in a 1,3-dipolar cycloaddition. The suggested mechanism accounts for the trans-position of the methyne

Recent advances in transition-metal-catalyzed incorporation of fluorine-containing groups

• Xiaowei Li,
• Xiaolin Shi,
• Xiangqian Li and
• Dayong Shi

Beilstein J. Org. Chem. 2019, 15, 2213–2270, doi:10.3762/bjoc.15.218

N-(1-Phenylethyl)aziridine-2-carboxylate esters in the synthesis of biologically relevant compounds

• Iwona E. Głowacka,
• Aleksandra Trocha,
• Andrzej E. Wróblewski and
• Dorota G. Piotrowska

Beilstein J. Org. Chem. 2019, 15, 1722–1757, doi:10.3762/bjoc.15.168

• moiety (Scheme 13) [51]. Before conversion of the chloromethyl group into a phosphonium salt the chiral auxiliary was removed. The reaction of the ylide (R)-45 prepared from the chloride (R)-44 with benzaldehyde afforded (E)-alkene (S)-46 which after hydrogenation and basic hydrolysis gave ʟ

• four stereoisomers with low (ca. 3:1) diastereoselectivity and in a non-enantioselective manner (Scheme 46) [21]. Undoubtedly, it was the 1,3-dipolar cycloaddition of the azomethine ylide 180 with an electron-rich alkene. Fortunately, cycloadducts (2R,3R,4S)-, (2S,3S,4R)-, (2R,3S,4R)- and (2S,3R,4S

Synthesis of pyrrolo[1,2-a]quinolines by formal 1,3-dipolar cycloaddition reactions of quinolinium salts

• Anthony Choi,
• Rebecca M. Morley and
• Iain Coldham

Beilstein J. Org. Chem. 2019, 15, 1480–1484, doi:10.3762/bjoc.15.149

• could be converted to other derivatives by Suzuki–Miyaura coupling, reduction or oxidation reactions. Keywords: azomethine ylide; cycloaddition; heterocycle; pyrrolidine; stereoselective; Introduction Cycloaddition reactions of azomethine ylides are an important class of pericyclic reactions that give

• ylide, or by condensation of a primary amine with an aldehyde to give an imine followed by prototropy or deprotonation to give N-metalated azomethine ylides (see, for example, [5][6][7][8][9][10][11][12][13][14][15][16][17][18]). An alternative method is to prepare a salt of a heterocycle, typically by

• quinolinium salts that have been reported in the literature involve ketones as electron-withdrawing groups to stabilise the intermediate ylide [39][40][41][42][43][44][45][46][47][48][49]; for example, the ketone 1 is known to undergo reaction with alkenes 2 (Z = electron-withdrawing group) to give the

Alkylation of lithiated dimethyl tartrate acetonide with unactivated alkyl halides and application to an asymmetric synthesis of the 2,8-dioxabicyclo[3.2.1]octane core of squalestatins/zaragozic acids

• Herman O. Sintim,
• Hamad H. Al Mamari,
• Hasanain A. A. Almohseni,
• Younes Fegheh-Hassanpour and
• David M. Hodgson

Beilstein J. Org. Chem. 2019, 15, 1194–1202, doi:10.3762/bjoc.15.116

• –Stevens-derived diazoesters 23 and 27, respectively. Only triethylsilyl-protected diazoester 27 proved viable to deliver a diazoketone 28. The latter underwent stereoselective carbonyl ylide formation–cycloaddition with methyl glyoxylate and acid-catalysed rearrangement of the resulting cycloadduct 29, to

• area have recently culminated in two communicated syntheses of 6,7-dideoxysqualestatin H5 (DDSQ (2), Figure 1) [12][13]. The centrepiece of both of these strategies is a rhodium(II)-catalysed tandem carbon ylide formation from a diazoketone 3 (Scheme 1) and stereoselective [3 + 2] cycloaddition with a

• (2). Natural product examples containing the monoalkylated tartaric acid motif. Carbonyl ylide cycloaddition–rearrangement to the squalestatin core [12][13]. Tartrate alkylation strategy to cycloaddition substrate. Conversion of α-ketoester to α-diazoester. Seebach’s tartrate alkylation and

An efficient synthesis of the guaiane sesquiterpene (−)-isoguaiene by domino metathesis

• Yuzhou Wang,
• Ahmed F. Darweesh,
• Patrick Zimdars and
• Peter Metz

Beilstein J. Org. Chem. 2019, 15, 858–862, doi:10.3762/bjoc.15.83

• of the aldehyde function as the dimethyl acetal [16][17][18], hydroboration and oxidative work-up of 10 provided a mixture of epimeric alcohols 11 that was unified by Ley–Griffith oxidation [19] to give ketone 12 [20]. Subsequent Wittig reaction with ylide 13 and acetal cleavage of the resultant

• keto aldehyde 18. Chemoselective dibromoolefination with ylide 19 prepared from dibromomethyltriphenylphosphonium bromide and sodium tert-butoxide [22] led to ketone 20 virtually without erosion of the relative configuration (dr = 22:1). After subjecting 20 to carbonyl olefination with unsaturated

• ylide 21 [8] followed by alkyne generation [23] with butyllithium in a one-pot process, trienyne 3 was obtained as a 1.6:1 mixture of E and Z olefin isomers. Due to the presence of the isopropyl group at the disubstituted alkene [24] of 3, 30 mol % of the second generation Grubbs catalyst 22 were

Synthesis of 2H-furo[2,3-c]pyrazole ring systems through silver(I) ion-mediated ring-closure reaction

• Vaida Milišiūnaitė,
• Rūta Paulavičiūtė,
• Eglė Arbačiauskienė,
• Vytas Martynaitis,
• Wolfgang Holzer and
• Algirdas Šačkus

Beilstein J. Org. Chem. 2019, 15, 679–684, doi:10.3762/bjoc.15.62

• -inflammatory [5], and antidiabetic agents [6]. The numerous known methods for the preparation of these compounds are generally based on multicomponent reactions of an aromatic aldehyde, a β-keto ester, a hydrazine and malononitrile [7]. In a similar reaction using a pyridinium ylide instead of malononitrile

Computational characterization of enzyme-bound thiamin diphosphate reveals a surprisingly stable tricyclic state: implications for catalysis

• Ferran Planas,
• Michael J. McLeish and
• Fahmi Himo

Beilstein J. Org. Chem. 2019, 15, 145–159, doi:10.3762/bjoc.15.15

• applications. All ThDP-catalyzed reactions require the reaction of the ThDP ylide (the activated state of the cofactor) with the substrate. Given that the cofactor can adopt up to seven states on an enzyme, identifying the factors affecting the stability of the pre-reactant states is important for the overall

• inhibitor). Overall, the calculations reveal that the relative stabilities of the cofactor states are greatly affected by the presence and identity of the bound ligands. A surprising finding is that benzoylformate binding, while favoring ylide formation, provided even greater stabilization to a

• catalytically inactive tricyclic state. Conversely, the inhibitor binding greatly destabilized the ylide formation. Together, these observations have significant implications for the reaction kinetics of the ThDP-dependent enzymes, and, potentially, for the use of unnatural substrates in such reactions

Ring-closing-metathesis-based synthesis of annellated coumarins from 8-allylcoumarins

• Christiane Schultze and
• Bernd Schmidt

Beilstein J. Org. Chem. 2018, 14, 2991–2998, doi:10.3762/bjoc.14.278

• the past few years. Starting materials are allyl ethers of salicylic aldehydes or ketones 5 and the stable ylide ethyl (triphosphoranylidene)acetate (6), which upon microwave irradiation undergo a tandem Claisen rearrangement/Wittig olefination/cyclization sequence. This sequence was pioneered by the

One-pot synthesis of epoxides from benzyl alcohols and aldehydes

• Edwin Alfonzo,
• Jesse W. L. Mendoza and
• Aaron B. Beeler

Beilstein J. Org. Chem. 2018, 14, 2308–2312, doi:10.3762/bjoc.14.205

• alcohols and aldehydes. Keywords: Corey–Chaykovsky; epoxide; heterocycle; one-pot; ylide; Introduction Epoxides have historically served as strategic functional groups in target-oriented synthesis [1][2][3][4]. Common examples of their utility include stereospecific ring opening [5][6][7], rearrangements

An efficient and facile access to highly functionalized pyrrole derivatives

• Meng Gao,
• Wenting Zhao,
• Hongyi Zhao,
• Ziyun Lin,
• Dongfeng Zhang and
• Haihong Huang

Beilstein J. Org. Chem. 2018, 14, 884–890, doi:10.3762/bjoc.14.75

• , azomethine ylide) as the key substrate for 1,3-dipolar cycloadditions, the reaction conditions were very different exemplified by the wide range of reaction times from 0.3 h to 120 h, and the variable yields from 68% to 100% in different solvents. In order to establish the optimal experimental conditions

• suitable for the one-pot synthesis of pyrrolo[3,4-c]pyrrole-1,3-diones 12a–k, we investigated the reaction conditions step by step. Initially, benzaldehyde (7a) and ethyl glycinate hydrochloride (8a) were chosen as the model substrates for obtaining azomethine ylide 9a, and the results are summarized in

• Table 1. Based on reported methods, Et3N as base, MgSO4 as desiccant and CH2Cl2 as solvent were used for the synthesis of the azomethine ylide [13][14][17][18][19][20][21][22][23][24]. Because 9a easily decomposed to benzaldehyde on silica gel when monitored by TLC, we used 1H NMR to monitor the

Liquid-assisted grinding and ion pairing regulates percentage conversion and diastereoselectivity of the Wittig reaction under mechanochemical conditions

• Kendra Leahy Denlinger,
• Lianna Ortiz-Trankina,
• Preston Carr,
• Kingsley Benson,
• Daniel C. Waddell and
• James Mack

Beilstein J. Org. Chem. 2018, 14, 688–696, doi:10.3762/bjoc.14.57

• , and 5 indicates that the carbonate bases deprotonated the phosphonium salt to form the ylide which then subsequently added to the benzaldehyde. However, the oxygen anion could not bind to the phosphorus cation to produce the stilbene product, presumably due to the mismatched counter ion pair. After

One-pot sequential synthesis of tetrasubstituted thiophenes via sulfur ylide-like intermediates

• Jun Ki Kim,
• Hwan Jung Lim,
• Kyung Chae Jeong and
• Seong Jun Park

Beilstein J. Org. Chem. 2018, 14, 243–252, doi:10.3762/bjoc.14.16

• facile preparation of thienyl heterocycles 8. The mechanism for this reaction is based on the formation of a sulfur ylide-like intermediate. It was clearly suggested by (i) the intramolecular cyclization of ketene N,S-acetals 7 to the corresponding thiophenes 8, (ii) 1H NMR studies of Meldrum’s acid

• -substituted aminothioacetals 9, and (iii) substitution studies of the methoxy group on Meldrum’s acid containing N,S-acetals 9b. Notably, in terms of structural effects on the reactivity and stability of sulfur ylide-like intermediates, 2-pyridyl substituted compound 7a exhibited superior properties over

• those of others. Keywords: 5-(heterocyclic)thiophenes; one-pot sequential synthesis; sulfur ylide; tetrasubstituted thiophene; Introduction Since the discovery of stable sulfonium ylides 1 in 1930 [1] and the pioneering work of several research groups during the 1960s (2 and 3) [2][3][4][5][6][7][8][9

Progress in copper-catalyzed trifluoromethylation

• Guan-bao Li,
• Chao Zhang,
• Chun Song and
• Yu-dao Ma

Beilstein J. Org. Chem. 2018, 14, 155–181, doi:10.3762/bjoc.14.11

• halides with traditional trifluoromethylation reagents and a trifluoromethyl-substituted sulfonium ylide as a new reagent The CuI-mediated cross-coupling protocol using TESCF3 was firstly reported by Urata and Fuchikami [11]. The proposed mechanism of this reaction was demonstrated in Scheme 1. But it was

• reagent, trifluoromethyl-substituted sulfonium ylide, which was prepared by a Rh-catalyzed carbenoid addition to trifluoromethyl thioether (Scheme 4). This process was conducted in dichloromethane at 40 °C for 4 h with a catalyst loading of 100 ppm. Moreover, this new reagent was easily scaled-up and

• producing byproducts from a pentafluoroethylation. The proposed reaction mechanism is depicted in Scheme 9. First, a phosphonium ylide is formed after treating DFPB with DBU, and then dissociated to generate a difluorocarbene. The difluorocarbene reacts with DBU affording nitrogen ylide I, followed by a

Vinylphosphonium and 2-aminovinylphosphonium salts – preparation and applications in organic synthesis

• Anna Kuźnik,
• Roman Mazurkiewicz and
• Beata Fryczkowska

Beilstein J. Org. Chem. 2017, 13, 2710–2738, doi:10.3762/bjoc.13.269

• to vinylphosphonium salt. A phosphorus ylide thus generated undergoes a subsequent intramolecular Wittig reaction, leading to a carbo- or heterocyclic ring closure (Scheme 2) [1][2][3]. This reaction can be considered as a general method for the synthesis of carbo- and heterocyclic systems

• triphenylphosphine with 1-bromoethylbenzene. The resulting phosphonium salt 11 was then deprotonated to the corresponding ylide 12, which in the last step was subjected to bromination to give the expected α-bromoethylphosphonium bromide 13 [10]. 1.3. Peterson olefination of α-trimethylsilylphosphonium ylides with

• at room temperature to give the corresponding α-trimethylsilylphosphonium salt 14. The latter salt was deprotonated in the presence of s-BuLi under kinetically controlled conditions, and the resulting ylide 15 reacted with aldehyde, providing tributylvinylphosphonium salt derivatives 17 in good

Rh(II)-mediated domino [4 + 1]-annulation of α-cyanothioacetamides using diazoesters: A new entry for the synthesis of multisubstituted thiophenes

• Jury J. Medvedev,
• Ilya V. Efimov,
• Yuri M. Shafran,
• Vitaliy V. Suslonov,
• Vasiliy A. Bakulev and
• Valerij A. Nikolaev

Beilstein J. Org. Chem. 2017, 13, 2569–2576, doi:10.3762/bjoc.13.253

• ’, as illustrated in Scheme 4. Initially generated from diazoester 2 carbenoid A attacks the sulfur atom of thioamide 1 to give the key intermediate S-ylide B [36][37][38][59][60], which is stabilized by ‘thioamide resonance’ [36][37][38]. The anion center of S-ylide B then attacks the carbon atom of

• or 5. Principally, thiophenes 3 and 5 could be derived from the S-ylide B in a somewhat different way, as for instance: coordination E of cyano group in S-ylide with a rhodium catalyst [63] gives rise to zwitterion F with a negative charge located on the rhodium atom, followed by recovery of the

• ylide with the rhodium catalyst. Within the adopted general scheme, the occurrence of thiophenes 4 could be rationalized by partial hydrolysis of carbamates 3 under the reaction conditions with the initial formation of the primary heteroaromatic amines 7. The latter then interact with carbenoids A, to

Dialkyl dicyanofumarates and dicyanomaleates as versatile building blocks for synthetic organic chemistry and mechanistic studies

• Grzegorz Mlostoń and
• Heinz Heimgartner

Beilstein J. Org. Chem. 2017, 13, 2235–2251, doi:10.3762/bjoc.13.221

• . In contrast to the nucleophilic dimethoxycarbene, the formal transfer of the bis(carbomethoxy)carbene from the sulfur ylide 12 to E-1a leads to the cyclopropane derivative 13 [23] (Scheme 4). The reaction was proposed to occur stepwise via the zwiterrionic intermediate 14. Another example of a

• - and Z-1b, and depending on the substitution pattern of the aziridine ring, the formation of the pyrrolidine derivative 34 occurred either with complete stereoselectivity or mixtures of isomeric products were obtained. The [3 + 2]-cycloaddition of the azomethine ylide E,Z-32a, formed via conrotatory

• mixture of products was obtained starting from trans-33b. The formation of these isomeric products suggests that in the course of the reaction, isomerizations of both the intermediate azomethine ylide of type 32 as well as of the electron-deficient dipolarophiles E- and Z-1b, occur. The observed

Conjugated nitrosoalkenes as Michael acceptors in carbon–carbon bond forming reactions: a review and perspective

• Yaroslav D. Boyko,
• Valentin S. Dorokhov,
• Alexey Yu. Sukhorukov and
• Sema L. Ioffe

Beilstein J. Org. Chem. 2017, 13, 2214–2234, doi:10.3762/bjoc.13.220

• ) followed by a formal [4 + 1]-annulation reaction with ylide (tandem Michael addition/intramolecular nucleophilic substitution of dimethylsulfide by oximate anion in intermediate 94). The addition of sulfonium ylides to nitrosoalkenes can end up not only with cyclic products, but also with α,β-unsaturated

• oximes 95, if the elimination of dimethyl sulfide from 94 proceeds faster than the cyclization. The cyclization/elimination selectivity was found be highly dependent on the nature of substituents in ylide 92. Only when R3 was an acyl or phenacyl group, exclusive formation of isoxazoline products 93 was

Mechanochemical synthesis of small organic molecules

• Tapas Kumar Achar,
• Anima Bose and
• Prasenjit Mal

Beilstein J. Org. Chem. 2017, 13, 1907–1931, doi:10.3762/bjoc.13.186

• Reaction Pecharsky and co-workers reported the solvent-free mechanochemical synthesis of phosphonium salts [54] and phosphorus ylides [55] in the presence of the weak base K2CO3. Mechanochemically prepared phosphorous ylide from triphenylphosphine in presence of K2CO3 was utilized for a one-pot solvent

Dimerization reactions of aryl selenophen-2-yl-substituted thiocarbonyl S-methanides as diradical processes: a computational study

• Michael L. McKee,
• Grzegorz Mlostoń,
• Katarzyna Urbaniak and
• Heinz Heimgartner

Beilstein J. Org. Chem. 2017, 13, 410–416, doi:10.3762/bjoc.13.44

• . This reaction has a free energy of the transition state of 15.7 kcal/mol (TS1) and is spontaneous by −35.5 kcal/mol (Figure 2). In an alternative reaction, two molecules of thiocarbonyl ylide 8 initially form a complex 15, which is bound by 4.5 kcal/mol (∆H (THF, 298 K)) and subsequently converts over

• Supporting Information File 1). The cyclization of the diradical leading to 2,2-diphenylthiirane occurs via a transition state with a free energy barrier very similar to the conversion 8 → 3a (16.4 versus 15.7 kcal/mol, respectively). The intermediate complex of two ylide molecules converts into the 1,6

Multicomponent synthesis of spiropyrrolidine analogues derived from vinylindole/indazole by a 1,3-dipolar cycloaddition reaction

• Manjunatha Narayanarao,
• Lokesh Koodlur,
• Vijayakumar G. Revanasiddappa,
• Subramanya Gopal and
• Susmita Kamila

Beilstein J. Org. Chem. 2016, 12, 2893–2897, doi:10.3762/bjoc.12.288

• out by reacting N-alkylvinyl products 3 with azomethine ylide, generated in situ through decarboxylative condensation of ninhydrin (4) and sarcosine (5). The 1,3-dipolar cycloaddition of the ylide with the olefin 3 yielded spiropyrrolidines 7 with regiospecificity (Table 1, entries 1–4). The formation

• of the azomethine ylide intermediate and a plausible reaction pathway for the formation of the spiranes is depicted following the retrosynthetic strategy in Scheme 2. The applicability of the cycloaddition reaction was explored first for indole derivatives 7a–d and then extended to the synthesis of

From betaines to anionic N-heterocyclic carbenes. Borane, gold, rhodium, and nickel complexes starting from an imidazoliumphenolate and its carbene tautomer

• Ming Liu,
• Jan C. Namyslo,
• Martin Nieger,
• Mika Polamo and
• Andreas Schmidt

Beilstein J. Org. Chem. 2016, 12, 2673–2681, doi:10.3762/bjoc.12.264

• been prepared from mesoionic compounds (Figure 1). The carbenes 3 [31] and 4 [32][33] originate from a conjugated ylide and a cross-conjugated mesomeric betaine, respectively. A review elucidates the interconversions of mesomeric betaines to different types of N-heterocyclic carbenes (NHC, aNHC, rNHC